Description
Core Product Summary (Brand / Model / Key Attributes)
The National Instruments PXI-6115 is a high-speed, simultaneous-sampling multifunction data acquisition (DAQ) module belonging to the NI S Series. Engineered for applications requiring continuous, dedicated sampling across multiple inputs without phase delay, it provides high-throughput measurement capabilities within standard PXI and CompactPCI chassis configurations.
The module features 4 simultaneous-sampling analog input channels with 12-bit resolution, operating at maximum sampling rates up to 10 MS/s per channel. It also integrates 2 simultaneous analog output channels, 8 lines of digital I/O, and two 24-bit general-purpose counter/timers. Utilizing dedicated analog-to-digital converters (ADCs) for every input channel, the PXI-6115 ensures absolute time-alignment across all sensor inputs for transient capture, radar, sonar, ultrasonic testing, and high-frequency stimulus-response applications.
Key Technical Specifications
| Parameter | Verified Specification Value |
| Manufacturer | National Instruments (NI) |
| Model / Part Number | PXI-6115 |
| Product Type | S Series Simultaneous-Sampling Multifunction DAQ Module |
| Form Factor | 3U PXI / CompactPCI slot module |
| Analog Input Channels | 4 simultaneous-sampling differential inputs |
| ADC Resolution | 12-bit |
| Maximum Sampling Rate | Up to 10 MS/s per channel |
| Input Voltage Ranges | Software-selectable spans from \pm 200 mV up to \pm 42 V |
| Analog Output Channels | 2 simultaneous-update channels |
| Analog Output Rate / Resolution | 10 MS/s update rate, 12-bit resolution (\pm 10 V range) |
| Digital I/O Lines | 8 TTL/CMOS compatible lines |
| Counter/Timers | Two 24-bit general-purpose counters |
| Bus Interface | PXI backplane (PCI-based data transfer) |
Detailed Product Overview
The National Instruments PXI-6115 utilizes S Series architecture, which assigns a dedicated ADC to each input channel rather than multiplexing a single ADC across multiple points. This design enables true simultaneous sampling at 10 MS/s per channel, preserving exact phase relationships between inputs.
The module’s flexible analog input stages offer software-selectable ranges from \pm 200 mV to \pm 42 V, accommodating diverse signal amplitudes from low-level sensors to high-voltage industrial controls. In addition to high-speed inputs, the unit includes 2 synchronized analog outputs capable of generating arbitrary waveforms at 10 MS/s, alongside 8 digital I/O lines and dual 24-bit hardware counters for event counting, frequency measurement, or pulse generation. Integration with NI-DAQmx driver software enables straightforward configuration and programmatic control within environments like LabVIEW, LabWindows/CVI, C++, and Python.

PXI-6115

PXI-6115
Engineering Selection Highlights
- True Simultaneous Sampling: Dedicated ADCs on all 4 input channels eliminate channel-to-channel phase delay, critical for phase-sensitive analysis.
- High Throughput (10 MS/s): Captures fast transient signals and high-frequency waveforms up to the limits of the Nyquist frequency at full sample rates.
- Integrated Multifunction Design: Combines high-speed analog inputs, analog outputs, digital lines, and counter/timers onto a single PXI slot card.
- Flexible Voltage Ranges: Eight software-selectable input ranges support precise scaling across small signal transducers and high-amplitude sources up to \pm 42 V.
- PXI System Synchronization: Leverages PXI backplane triggers and clock routing to synchronize multi-module acquisition arrays across larger test stands.
Dimensions, Mounting & Connection Notes
The PXI-6115 is built in a standard 3U-height PXI module form factor. It slides directly into an available peripheral slot of a PXI chassis and secures via top and bottom panel screws to establish robust chassis ground continuity.
All external signals interface through a high-density front-panel connector. Proper shielded cabling and breakout accessories (such as shielded terminal blocks) must be utilized to maintain noise rejection and prevent signal degradation during high-speed 10 MS/s acquisition runs.
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
| Chassis Compatibility | PXI or PXI Express (Hybrid) chassis | Must be installed in a standard PXI peripheral slot with bus master capabilities. |
| Controller Requirement | Embedded PXI controller or MXI-connected remote workstation | Requires host processor resources capable of handling high-speed data streaming. |
| Software Environment | NI-DAQmx driver software, LabVIEW, C/C++, or Python | Software toolkits must support DAQmx streaming and timing libraries. |
| Cabling & Terminal Blocks | Shielded cable assemblies and corresponding NI terminal blocks (e.g., BNC-2110 or SCB-68) | Connects via front-panel high-density I/O connector to ensure signal integrity. |
FAQ
What makes the NI PXI-6115 an “S Series” module?
S Series DAQ modules feature a dedicated ADC for every analog input channel, enabling true simultaneous sampling across all channels without multiplexing delays.
What is the maximum sampling rate of the PXI-6115?
The module samples at up to 10 MS/s per channel simultaneously on all 4 analog input channels.
Does the PXI-6115 include analog outputs?
Yes, the module features 2 simultaneous analog output channels capable of updating at 10 MS/s with a \pm 10 V range.
What software drivers are required to operate the module?
The module is operated using the National Instruments NI-DAQmx driver framework across supported development software like LabVIEW.
Verification & Troubleshooting Notes
- Input Overvoltage Protection: If signal clipping or channel damage occurs, verify that input voltages do not exceed the selected software input range or the absolute maximum overvoltage rating (\pm 42 V).
- Streaming Buffer Underflows: During continuous high-speed streaming at 10 MS/s per channel, ensure host PC memory and PCI/PXI bus bandwidth are sufficient to prevent data buffer underflow errors.
- Trigger and Clock Cabling: In multi-module synchronized systems, verify that RTSI or PXI trigger lines are correctly routed and terminated in software to prevent synchronization drift.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626