Sale!

NI PXI-8423 Isolated RS-485 Serial Interface

The National Instruments PXI-8423 is an isolated serial communication interface for PXI-based systems, designed for RS-485 and RS-422 communication. The product family includes two-port and four-port configurations, allowing engineers to connect serial field devices, controllers, and instrumentation to a host computer through the PXI bus.

Categories: , , , , Brand:

Description

Core Product Summary

The National Instruments PXI-8423 is an isolated serial communication interface for PXI-based systems, designed for RS-485 and RS-422 communication. The product family includes two-port and four-port configurations, allowing engineers to connect serial field devices, controllers, and instrumentation to a host computer through the PXI bus.

The four-port PXI-8423/4 version provides four isolated serial ports through 10-position modular connectors. Its documented maximum baud rate is 430.8 kbps. The interface supports hardware transceiver-control modes for two-wire and four-wire RS-485/RS-422 arrangements. Port-to-port and port-to-host isolation help address ground-potential differences between connected equipment. Selecting the correct configuration is essential: the two-port and four-port variants differ in connector arrangement and power requirements, so the complete model designation should be checked before ordering cables or planning a replacement.

 

Key Technical Specifications

Parameter PXI-8423/2 PXI-8423/4
Interface standard RS-485 / RS-422 RS-485 / RS-422
Serial ports 2 4
Port isolation Isolated Isolated
Maximum baud rate 460.8 kbps 460.8 kbps
Connector DB-9 male 10-position modular jack (10P10C)
FIFO buffer 64 bytes per port 64 bytes per port
+5 VDC power consumption 800 mA typical; 1.3 A maximum 1.0 A typical; 1.5 A maximum
Dimensions 100 × 160 mm 100 × 160 mm
Operating temperature 0 to 55 °C 0 to 55 °C
Operating humidity 10–90% RH, noncondensing 10–90% RH, noncondensing
Maximum operating altitude 2,000 m 2,000 m

 

Detailed Product Overview

RS-485 and RS-422 Serial Communication

The PXI-8423 provides serial communication for equipment using RS-485 or RS-422 electrical signaling. These standards support differential signaling, making them suitable for industrial communication links where electrical noise and ground-potential differences must be considered.

The two-port and four-port variants allow multiple serial devices to communicate through one PXI controller. The maximum documented baud rate is 460.8 kbps. Actual communication performance depends on the connected equipment, protocol settings, cabling, topology, and host software.

Galvanic Isolation

Isolation is a key distinction between the PXI-8423 and non-isolated serial interfaces. The interface provides isolation between communication ports and between the ports and the host. This helps reduce the impact of ground loops and differences in ground potential between connected devices.

The specified continuous isolation voltage is 60 VDC for port-to-port and port-to-host paths. The dielectric withstand rating is 2,000 Vrms for a five-second test. These are different ratings and should not be interpreted as permission to operate continuously at the withstand voltage.

Transceiver Control and Network Configuration

The PXI-8423 supports hardware transceiver-control modes for two-wire and four-wire RS-485/RS-422 configurations. The selected mode must match the wiring arrangement and communication behavior of the connected device.

For a multidrop RS-485 network, engineers should also account for termination, biasing, cable length, device loading, and signal polarity. Incorrect termination or transceiver control can cause intermittent communication, corrupted data, or bus contention.

PXI-8423

PXI-8423

PXI-8423

PXI-8423

System Compatibility & Integration Requirements

Item / Dependency Requirement Practical Note
Host system Compatible PXI chassis and host controller Confirm slot compatibility and available +5 VDC power.
Serial protocol RS-485 or RS-422 Match the interface mode to the connected device.
Serial cabling Variant-specific cable The two-port model uses DB-9 connectors; the four-port model uses 10P10C modular jacks.
Four-port breakout Appropriate 10P10C-to-DB-9 or DB-25 cable Verify the cable pinout before connecting field equipment.
Software NI-Serial software and compatible host environment Validate driver support for the target operating system.
Two-wire network Compatible half-duplex RS-485 configuration Configure transceiver control and network termination appropriately.
Four-wire network Compatible full-duplex RS-422/RS-485 configuration Match transmit and receive pairs to the connected device.
Electrical isolation 60 VDC continuous isolation rating Observe the continuous working-voltage limits and applicable safety requirements.

 

Dimensions, Mounting & Connection Notes

  • Module dimensions: 100 × 160 mm.
  • Power source: PXI backplane, +5 VDC.
  • PXI-8423/2 connector: DB-9 male.
  • PXI-8423/4 connector: Four 10-position modular jacks.
  • Operating environment: 0 to 55 °C and 10–90% relative humidity, noncondensing.
  • Maximum operating altitude: 2,000 m.
  • Cabling: Use compatible serial cables with the correct pin assignments for RS-485/RS-422 operation.

Before connecting field devices, verify whether each port is configured for two-wire or four-wire communication. Confirm transmit and receive polarity, signal ground, termination, and biasing. Disconnect power from signal lines before installing or removing wiring.

 

FAQ

What is the NI PXI-8423?

The NI PXI-8423 is an isolated serial interface for RS-485 and RS-422 communication in PXI-based systems.

How many serial ports does it provide?

The PXI-8423 family includes a two-port version, PXI-8423/2, and a four-port version, PXI-8423/4.

What is the maximum baud rate?

The documented maximum baud rate is 460.8 kbps. The achievable communication rate depends on the network configuration and connected equipment.

What is the difference between PXI-8423/2 and PXI-8423/4?

The PXI-8423/2 provides two DB-9 serial ports. The PXI-8423/4 provides four ports through 10P10C modular jacks and requires compatible breakout cables for DB-9 or DB-25 connections.

Does the PXI-8423 support both RS-485 and RS-422?

Yes. Both variants support RS-485/RS-422 communication. The wiring and transceiver-control settings must match the selected communication mode.

What isolation does the PXI-8423 provide?

The specified isolation is 60 VDC continuous between ports and between ports and the host. The documented dielectric withstand rating is 2,000 Vrms for five seconds.

Which software is needed?

The hardware uses NI-Serial software. Driver compatibility should be checked against the host operating system and application environment before installation.

What should be checked when replacing an existing PXI-8423?

Confirm the full model suffix, port count, connector type, cable pinout, serial communication mode, isolation requirements, and driver environment. A four-port model cannot be treated as a connector-identical replacement for the two-port version.