Description
Core Product Summary
The NI PXIe-6544 is a 100 MHz digital waveform generator and analyzer for PXI Express systems. It provides 32 bidirectional, single-ended digital channels for generating and acquiring digital patterns, with support for 1.2 V, 1.5 V, 1.8 V, 2.5 V, and 3.3 V logic levels.
The module supports simultaneous pattern generation and acquisition at up to 100 Mbit/s per channel and uses NI-HSDIO software for configuration, scripting, triggering, and control. Its 68-pin VHDCI DIGITAL DATA & CONTROL connector carries the digital channels, triggers, events, and timing signals, while three SMA connectors provide external clock, trigger, and clock-output interfaces. The PXIe-6544 is supplied as part numbers 780992-02 with 8 Mbit per channel of onboard memory and 780992-03 with 64 Mbit per channel.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Product type | PXI Express digital waveform generator/analyzer |
| Digital channels | 32 bidirectional, single-ended data channels |
| Data signaling | Single data rate (SDR) |
| Maximum generation rate | 100 Mbit/s per channel |
| Maximum acquisition rate | 100 Mbit/s per channel |
| Maximum clock rate | 100 MHz |
| Logic levels | 1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V |
| Output voltage range | 1.2 V to 3.3 V |
| Output impedance | 50 Ω nominal |
| Input impedance | 50 kΩ nominal, high impedance |
| PFI channels | 4 programmable-function channels |
| Clock inputs | 2 |
| Clock outputs | 2 |
| Onboard memory | 8 Mbit/channel (780992-02) or 64 Mbit/channel (780992-03) |
| Memory architecture | Synchronization and Memory Core (SMC); waveforms and script instructions share onboard memory |
| Sample-clock sources | Internal 800 MHz VCO with 32-bit DDS, CLK IN, or STROBE for acquisition |
| Internal sample-clock range | 100 Hz to 100 MHz |
| External CLK IN sample-clock range | 20 kHz to 100 MHz |
| STROBE sample-clock range | 100 Hz to 100 MHz |
| Reference-clock sources | PXI_CLK100, CLK IN, or internal oscillator |
| Bus interface | PXI Express |
| Form factor | Single 3U CompactPCI Express/PXI Express slot |
| Dimensions | 21.6 cm × 2.0 cm × 13.0 cm |
| Weight | 519 g |
| Operating temperature | 0 °C to 55 °C |
| Operating humidity | 10% to 90% noncondensing |
| Power requirement | +3.3 V at 1.75 A characteristic / 1.77 A maximum; +12 V at 2.2 A characteristic / 2.3 A maximum |
| Total power | 32.2 W characteristic / 33.5 W maximum |
| Driver software | NI-HSDIO; driver support first available in NI-HSDIO 1.6 |

PXIe-6544

PXIe-6544
Engineering Selection Highlights
- The PXIe-6544 provides 32 bidirectional single-ended channels, so it suits digital pattern test applications where the same pins must generate stimulus and capture responses.
- Its 100 Mbit/s SDR generation and acquisition rate defines the upper speed for each data channel; applications requiring faster edge rates or higher channel counts need a different instrument configuration.
- Selectable 1.2 V to 3.3 V logic levels allow direct interfacing with common low-voltage digital devices, but generation and acquisition sessions share one voltage resource and must use the same logic family during simultaneous operation.
- The module does not support hardware compare or a parametric measurement unit (PMU), so it is not the correct selection where real-time expected-versus-actual comparison or voltage/current sourcing and measurement is required.
- The 68-pin VHDCI DDC connector is the primary digital interface; a compatible cable and connector block are required to bring DIO, PFI, STROBE, and DDC CLK OUT signals to the test fixture.
- The SHC68-C68-D4 shielded cable and supplied snap-on ferrite beads are required for the stated EMC performance; I/O cables must not exceed 3 m.
- NI-HSDIO is required to configure, control, and calibrate the instrument, with programming interfaces for LabVIEW, LabWindows/CVI, Measurement Studio, Visual C/C++, and .NET.
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Chassis platform | PXI Express-compatible chassis | The module uses a single 3U PXI Express slot. |
| Backplane timing | PXI_CLK100 reference clock | PXI_CLK100 can serve as the PLL reference-clock source. |
| Backplane triggers | PXI_TRIG <0..7> inputs and PXI_TRIG <0..6> outputs | These backplane lines support trigger routing between PXI Express modules. |
| Digital connection | 68-pin VHDCI DIGITAL DATA & CONTROL connector | Carries DIO <0..31>, PFI <1..3>, STROBE, DDC CLK OUT, and ground references. |
| Cable | SHC68-C68-D4 shielded cable | NI specifies this cable, with the supplied snap-on ferrite beads, for EMC performance. |
| Connector blocks | TBX-68, SCB-68A, or CB-68LP | These are listed as compatible connectivity accessories for both PXIe-6544 part numbers. |
| Driver | NI-HSDIO | Required for configuration, control, calibration, and application development. |
| Software environments | LabVIEW, LabWindows/CVI, Measurement Studio, Visual C/C++, .NET | NI-HSDIO provides APIs and examples for these environments. |
| Configuration utility | NI Measurement & Automation Explorer (MAX) | Included with NI-HSDIO media for interactive configuration and testing. |
Detailed Product Overview
The NI PXIe-6544 is a single-slot PXI Express instrument designed for high-speed digital pattern generation and acquisition. It provides 32 single-ended, bidirectional data channels, each capable of 100 Mbit/s SDR operation. Channel direction can be controlled per channel or per operation, allowing the same physical pins to be assigned to generation or acquisition roles as the test sequence requires.
The instrument supports five programmable logic families: 1.2 V, 1.5 V, 1.8 V, 2.5 V, and 3.3 V. Generation and acquisition use a shared voltage resource, so simultaneous sessions must be configured for the same logic family. At power-on, the data-channel drivers are disabled and the inputs present a nominal 50 kΩ impedance, which helps limit unintended drive to the connected circuit before software configuration.
Timing flexibility is a central feature. The internal sample clock uses an 800 MHz VCO with 32-bit direct digital synthesis and covers 100 Hz to 100 MHz, with a maximum programmed-frequency resolution of 0.2 Hz. External timing can be supplied through the SMA CLK IN connector or, for acquisition, through the STROBE terminal on the VHDCI connector. The module can export its sample clock through either the SMA CLK OUT connector or the DDC CLK OUT terminal, supporting clock distribution to other instruments or test hardware.
Onboard memory is organized around NI’s Synchronization and Memory Core, where waveform data and script instructions share memory. The 780992-02 configuration provides 8 Mbit per channel, equivalent to 32 MBytes total, while the 780992-03 configuration provides 64 Mbit per channel, equivalent to 256 MBytes total. Scripted generation can sequence waveforms, repeat them, and respond to script triggers; finite repeat counts range from 1 to 16,777,216.
Integration is handled through a 68-pin VHDCI DDC connector and three SMA connectors. The DDC connector carries the 32 data channels, three additional PFI lines, the acquisition STROBE input, and the generation-only DDC CLK OUT output. PFI 0 is available on the front panel as an SMA connection for triggers, events, or static I/O. For the stated EMC performance, NI specifies use of the SHC68-C68-D4 shielded cable, the supplied ferrite beads, shielded accessories, and PXI EMC filler panels in unused chassis slots.
The module requires NI-HSDIO driver software, first supported in NI-HSDIO 1.6. NI-HSDIO provides an IVI-compliant programming interface and supports LabVIEW, LabWindows/CVI, Measurement Studio, Microsoft Visual C/C++, and .NET development environments. NI MAX provides interactive configuration and diagnostic tools, including self-test functions.
Dimensions, Mounting & Connection Notes
| Item | Specification |
|---|---|
| Form factor | Single 3U CompactPCI Express slot, PXI Express compatible |
| Dimensions | 21.6 cm × 2.0 cm × 13.0 cm |
| Weight | 519 g (18.3 oz) |
| Main digital connector | 68-pin VHDCI, labeled DIGITAL DATA & CONTROL (DDC) |
| SMA connectors | CLK IN, PFI 0, and CLK OUT |
| Cable requirement | SHC68-C68-D4 shielded cable; maximum I/O cable length 3 m for stated EMC performance |
| EMC accessory requirement | Supplied snap-on ferrite beads and PXI EMC Filler Panels (NI part number 778700-01) in all open chassis slots |
| Cooling | Follow the module’s forced-air-cooling guidance; intended for indoor use |
| Operating environment | 0 °C to 55 °C, 10% to 90% noncondensing relative humidity, 0 to 2,000 m altitude |
Applications & System Role
The PXIe-6544 occupies the digital stimulus/response position in a PXI Express test system. Its 32 bidirectional lines can drive digital patterns to a device under test and acquire the resulting logic states, making it applicable to board-level digital validation, interface testing, and mixed-signal test setups that combine digital waveform instruments with other PXI modules.
The internal DDS-based clock, external CLK IN, and STROBE input provide timing options for pattern generation and acquisition. PXI_TRIG routing and PFI channels allow the instrument to participate in multi-instrument trigger and event schemes, while the SMC architecture supports scripted waveform sequences within the available onboard memory.
FAQ
What is the NI PXIe-6544?
The NI PXIe-6544 is a PXI Express digital waveform generator and analyzer with 32 bidirectional single-ended digital channels for pattern generation and acquisition.
What data rate does the PXIe-6544 support?
It supports up to 100 Mbit/s per channel for both generation and acquisition in single-data-rate mode, with a maximum clock rate of 100 MHz.
Which logic levels does it support?
The module supports 1.2 V, 1.5 V, 1.8 V, 2.5 V, and 3.3 V logic levels. Generation and acquisition sessions share a common voltage resource and must use the same logic family when operated simultaneously.
What is the difference between part numbers 780992-02 and 780992-03?
Both are NI PXIe-6544 instruments with 32 channels and 100 Mbit/s operation. Part number 780992-02 has 8 Mbit per channel of onboard memory, while 780992-03 has 64 Mbit per channel.
Which connector is used for the digital channels?
The 32 digital channels are provided through a 68-pin VHDCI connector labeled DIGITAL DATA & CONTROL (DDC). The same connector also carries PFI <1..3>, STROBE, DDC CLK OUT, and ground references.
Which software is required?
The instrument requires NI-HSDIO driver software. NI-HSDIO provides APIs for LabVIEW, LabWindows/CVI, Measurement Studio, Microsoft Visual C/C++, and .NET, while NI MAX provides interactive configuration and test tools.
What chassis and accessories are required?
The PXIe-6544 installs in a PXI Express-compatible 3U chassis. NI lists the SHC68-C68-D4 shielded cable and TBX-68, SCB-68A, or CB-68LP connector blocks as compatible connectivity accessories.
Does the PXIe-6544 support hardware compare or PMU functions?
No. NI specifies that the PXIe-6544 does not support hardware compare or a parametric measurement unit (PMU).

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626