Sale!

NI SCXI-1193 500 MHz 32-Channel RF Multiplexer Switch Module

Parameter Verified Specification
Manufacturer National Instruments (NI)
Model SCXI-1193
Part number 776572-93
Product type RF multiplexer switch module
System family SCXI
Channel count 32 RF channels
Characteristic impedance 50 Ω nominal
RF frequency capability DC to beyond 500 MHz
Insertion loss, 8×1 topology Less than 1.4 dB from DC to 200 MHz; less than 2.4 dB from 200 MHz to 500 MHz
Categories: , , , , SKU: SCXI-1193 Brand:

Description

Core Product Summary

The NI SCXI-1193 is a high-density 32-channel RF relay multiplexer switch module for the National Instruments SCXI platform. It is designed for signal routing from DC to beyond 500 MHz in 50 Ω RF test and measurement systems.

The module can be software-configured as unterminated multiplexers, externally terminated multiplexers, or a dimensionally flexible sparse matrix. Its 50 Ω characteristic impedance, MCX RF connectors, and multiple routing topologies make it suitable for integration with high-frequency instruments such as PXI arbitrary waveform generators and oscilloscopes.

 

Key Technical Specifications

Parameter Verified Specification
Manufacturer National Instruments (NI)
Model SCXI-1193
Part number 776572-93
Product type RF multiplexer switch module
System family SCXI
Channel count 32 RF channels
Characteristic impedance 50 Ω nominal
RF frequency capability DC to beyond 500 MHz
Insertion loss, 8×1 topology Less than 1.4 dB from DC to 200 MHz; less than 2.4 dB from 200 MHz to 500 MHz
Typical 3 dB bandwidth, 8×1 topology Greater than 900 MHz
Typical 3 dB bandwidth, 16×1 topology Greater than 750 MHz
Typical 3 dB bandwidth, 32×1 topology Greater than 600 MHz
Maximum switching voltage 60 VDC, Measurement Category I
Transient overvoltage withstand Up to 800 Vpk
Maximum switching current 0.5 A per channel
Maximum carry current 1 A per channel
Maximum switching power 10 W per channel
Maximum RF carry power 10 W up to 500 MHz per channel
Maximum scan rate 100 channels/s
Relay type Electromechanical, latching
I/O connectors 36 MCX jacks
Trigger connectors 2 SMB jacks
Software NI-SWITCH driver

The specifications above are taken from NI’s SCXI-1193 specifications and product documentation.

 

Engineering Selection Highlights

  • 32 RF channels with 50 Ω impedance → the module is intended for RF signal routing rather than general-purpose low-frequency relay switching.
  • Multiple routing topologies → the same module can be configured as 32×1, dual 16×1, or quad 8×1 multiplexers, allowing the routing architecture to match the test system.
  • Terminated multiplexer options → external termination can be applied to selected configurations, which is relevant when matching RF signal paths.
  • 10 W RF carry power per channel → RF power handling is limited per channel and must be evaluated together with frequency and insertion-loss heating.
  • 60 VDC, CAT I switching limit → the module is intended for signal-level routing, not for switching mains or high-energy power circuits.
  • 100 channels/s maximum scan rate → switching speed is limited and should be checked against the required test sequence rate.
  • NI-SWITCH software support → route configuration is performed through the NI-SWITCH driver environment.
SCXI-1193

SCXI-1193

SCXI-1193

SCXI-1193

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Signal-conditioning platform NI SCXI The module is installed in an SCXI system.
RF instruments PXI arbitrary waveform generator, PXI oscilloscope, and comparable high-frequency instruments The module routes RF signals between instruments and devices under test.
Routing topology 32×1, dual 16×1, quad 8×1, terminated multiplexers, or sparse matrix Select and configure the topology through software.
RF connections 36 MCX jacks Use appropriate MCX-based RF cabling and adapters.
Trigger connections 2 SMB jacks Supports trigger input and output routing.
Control software NI-SWITCH driver Required for switch configuration and route control.
Power supply +18.5 to +25 VDC at 170 mA Provided through the SCXI chassis power architecture.

NI identifies the SCXI-1193 as supported by the NI-SWITCH driver and describes its integration with high-frequency PXI instruments.

 

Detailed Product Overview

 

RF routing rather than general-purpose switching

The SCXI-1193 is a 50 Ω RF relay module with 32 channels. NI describes it as a high-density RF multiplexer intended to carry signals from DC to beyond 500 MHz. Its MCX connectors, 50 Ω impedance, and RF power and insertion-loss specifications distinguish it from general-purpose digital or power-relay modules.

The module’s switching ratings are 60 VDC, 0.5 A switching current, and 1 A carry current per channel. NI identifies the module as Measurement Category I and states that it is intended for signal voltages no greater than 60 VDC.

 

Topology is software-defined

The SCXI-1193 can be configured as a single 32×1 multiplexer, dual 16×1 multiplexers, or quad 8×1 multiplexers. It also supports externally terminated multiplexer configurations and dimensionally flexible sparse matrices.

NI documentation also describes less conventional configurations. The module’s 32 channels can be divided into eight 3×1 multiplexers, with the four common terminals able to form a ninth 3×1 multiplexer. In the 32×1 topology, all channels route to COM0; the unused COM terminals can become additional channels in independent topologies, producing 17×1 or 35×1 unterminated multiplexers.

 

RF performance depends on topology

NI specifies different bandwidth and insertion-loss characteristics by topology. For an 8×1 configuration, insertion loss is less than 1.4 dB from DC to 200 MHz and less than 2.4 dB from 200 MHz to 500 MHz, with typical 3 dB bandwidth greater than 900 MHz. For a 32×1 configuration, typical 3 dB bandwidth is greater than 600 MHz.

This means that the number of channels combined into one signal path affects RF performance. A system requiring the highest available bandwidth should favor a smaller multiplexer topology where the application permits it.

 

Switching and trigger behavior

The module uses electromechanical latching relays and has a maximum scan rate of 100 channels/s. Its trigger inputs and outputs can use SCXI trigger lines, the front panel, or the rear connector. Trigger input pulses have a minimum width of 150 ns, while output pulse width is programmable from 1 μs to 62 μs.

The module provides 36 MCX jacks for RF input/output connections and 2 SMB jacks for trigger connections. It is controlled through the NI-SWITCH driver, which supports route configuration and switch operation.

 

Applications & System Role

The SCXI-1193 is the RF signal-routing stage in an NI SCXI-based test system. It connects RF sources, instruments, and devices under test through software-controlled relay paths, allowing one instrument connection to be routed among multiple channels.

A technical-fit scenario is an RF test system in which a signal generator, oscilloscope, or other high-frequency instrument must be selectively connected to different test points. The module can consolidate those connections into a 32×1 multiplexer, split them into independent 16×1 or 8×1 multiplexers, or implement a sparse-matrix routing arrangement.

 

FAQ

 

What is the NI SCXI-1193?

It is a 32-channel, 50 Ω RF multiplexer switch module for the NI SCXI platform, capable of routing signals from DC to beyond 500 MHz.

 

What routing topologies does it support?

It supports a 32×1 multiplexer, dual 16×1 multiplexers, quad 8×1 multiplexers, externally terminated multiplexers, and sparse-matrix configurations.

 

What is its characteristic impedance?

The SCXI-1193 has a nominal 50 Ω characteristic impedance.

 

What RF bandwidth does it provide?

Typical 3 dB bandwidth is greater than 900 MHz in an 8×1 topology, greater than 750 MHz in a 16×1 topology, and greater than 600 MHz in a 32×1 topology.

 

What voltage and current can it switch?

It is rated for 60 VDC switching voltage, 0.5 A switching current, and 1 A carry current per channel.

 

What connectors does it use?

It provides 36 MCX jacks for RF input/output connections and 2 SMB jacks for trigger connections.

 

Which software controls the module?

The module is controlled with the NI-SWITCH driver.

 

What is its maximum scan rate?

The SCXI-1193 has a maximum scan rate of 100 channels/s.