Sale!

NI SCXI-1327 High-Voltage Attenuator Terminal Block

The NI SCXI-1327 is a shielded high-voltage attenuator terminal block that mounts to the front of compatible SCXI analog input modules. Each of its eight channels contains a precision 100:1 resistive voltage divider that can be enabled or disabled by onboard switches, extending the measurable input range to 300 Vrms or ±300 VDC.

Categories: , , , , SKU: SCXI-1327 Brand:

Description

Core Product Summary

The NI SCXI-1327 is a shielded high-voltage attenuator terminal block that mounts to the front of compatible SCXI analog input modules. Each of its eight channels contains a precision 100:1 resistive voltage divider that can be enabled or disabled by onboard switches, extending the measurable input range to 300 Vrms or ±300 VDC.

The terminal block provides 18 screw terminals for convenient field wiring and includes an onboard thermistor cold-junction sensor for thermocouple measurements. It is designed for use with the SCXI-1120, SCXI-1120D, SCXI-1121, SCXI-1125, and SCXI-1126 modules and reduces the effective input impedance of the host module to 1 MΩ when the attenuators are engaged.

Key Technical Specifications

Parameter Specification
Product type High-voltage attenuator terminal block
Compatible modules SCXI-1120, SCXI-1120D, SCXI-1121, SCXI-1125, SCXI-1126
Attenuation 100:1 or 1:1 (switch-selectable per channel)
Maximum input range 300 Vrms or ±300 VDC
Measurement category CAT II
Cold-junction sensor Thermistor
Sensor output 1.91 V (0 °C) to 0.58 V (55 °C)
Sensor accuracy (typical) ±0.9 °C (15–35 °C range reference); higher outside this band
Screw terminals 18 (8 signal pairs + ground)
Input impedance (with attenuation) 1 MΩ
Coupling DC

Detailed Product Overview

The SCXI-1327 expands the voltage-handling capability of selected SCXI isolated analog input modules by inserting a precision resistive divider network in each signal path. When the 100:1 attenuation path is selected via the internal switches, signals up to 300 Vrms or ±300 VDC can be measured while remaining within the safe input range of the host module. For low-voltage work the dividers can be bypassed on a per-channel basis, restoring a direct 1:1 connection.

Eighteen screw terminals provide straightforward field connections: eight differential pairs map to the module inputs (or to a combination of inputs and excitation channels when used with the SCXI-1121), and additional terminals connect to chassis ground. The terminal block is fully shielded and includes a strain-relief feature at the cable entry.

An onboard thermistor cold-junction sensor supports thermocouple measurements. The sensor output voltage ranges from approximately 1.91 V at 0 °C to 0.58 V at 55 °C and is available to the host module for cold-junction compensation. Because the attenuation setting is hardware-based, the corresponding scaling factor must be configured in software (Measurement & Automation Explorer or the application) so that readings are correctly scaled.

The SCXI-1327 is rated for CAT II environments and is intended for indoor use. When the attenuators are engaged, the input impedance presented to the field signals is 1 MΩ.

Dimensions, Mounting & Connection Notes

  • Mounting: Direct front attachment to compatible SCXI modules.
  • Field connections: 18 screw terminals.
  • Attenuation control: Internal per-channel switches.
  • Grounding: Dedicated functional ground terminals provided.
  • Environment: Indoor use; operating temperature range consistent with SCXI terminal-block family (typically 0 to 50 °C).
SCXI-1327

SCXI-1327

SCXI-1327

SCXI-1327

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Host modules SCXI-1120, SCXI-1120D, SCXI-1121, SCXI-1125, SCXI-1126 Direct front-mount attachment
Attenuation selection Onboard switches (100:1 or 1:1) per channel Must be matched by software scaling configuration
Cold-junction compensation Onboard thermistor sensor Available for thermocouple applications
Field wiring Screw terminals Use wire rated for the applied voltage
Input impedance 1 MΩ when attenuators are enabled Affects source loading
Measurement category CAT II, 300 V working voltage Suitable for local-level circuits

FAQ

What is the NI SCXI-1327?
It is a shielded high-voltage attenuator terminal block that provides switchable 100:1 attenuation on each of eight channels and an onboard cold-junction sensor for use with selected SCXI analog input modules.

What voltage range does the SCXI-1327 support?
With the 100:1 attenuators enabled, the terminal block extends the measurable range to 300 Vrms or ±300 VDC.

How is attenuation selected?
Attenuation is selected by onboard switches on a per-channel basis. The corresponding scaling must also be set in software.

Which modules are compatible with the SCXI-1327?
It is compatible with the SCXI-1120, SCXI-1120D, SCXI-1121, SCXI-1125, and SCXI-1126.

Does the SCXI-1327 include cold-junction compensation?
Yes. It contains a thermistor cold-junction sensor whose output is available to the host module.

What is the input impedance when attenuation is enabled?
The effective input impedance is 1 MΩ.