Description
Core Product Summary
The NI SCXI-1349 is a shielded cable adapter for connecting an NI SCXI signal-conditioning system to compatible 68-pin E Series data-acquisition devices. It provides the interface between the rear signal connector of an SCXI module and the DAQ device’s 68-pin cable connection.
The assembly includes the SCXI-1349 cable adapter and an SH68-68-EP shielded cable. The adapter also provides a 50-pin male breakout connector for compatible SCXI accessories, such as the SCXI-1180 feedthrough panel or a CB-50 terminal block.
Key Technical Specifications
| Parameter | Verified Specification |
|---|---|
| Manufacturer | National Instruments (NI) |
| Model | SCXI-1349 |
| Product type | Shielded cable adapter assembly |
| System family | SCXI |
| DAQ connection | 68-pin E Series DAQ devices, excluding DAQCards |
| Cable included | SH68-68-EP shielded cable |
| Adapter connector to DAQ | 68-pin connector |
| Adapter connector to SCXI module | 50-pin connector |
| Breakout connector | 50-pin male connector |
| Compatible accessories | SCXI-1180 feedthrough panel, CB-50 terminal block |
| Maximum working voltage | 30 Vrms, 42 Vpk, or 60 VDC, signal voltage plus common-mode voltage |
| Operating temperature | 0 to 50°C |
| Storage temperature | -20 to 70°C |
| Humidity | 10 to 90% RH, noncondensing |
| Installation category | I |
| Pollution degree | 2 |
| EMC compliance | CE, C-Tick, FCC Part 15 Class A |
The adapter’s cable configuration, breakout connector, voltage limit, environmental limits, and compliance information are documented in NI installation and accessory documentation.
Engineering Selection Highlights
- 68-pin E Series DAQ connection → the SCXI-1349 is intended for E Series DAQ devices with a 68-pin connector, excluding DAQCards.
- 50-pin SCXI module connection → the adapter plugs into the rear signal connector of the selected SCXI module.
- 50-pin breakout connector → the adapter can support compatible accessories such as the SCXI-1180 or CB-50 terminal block.
- Shielded cable assembly → the included SH68-68-EP cable supports low-noise signal connections between the SCXI module and DAQ device.
- 60 VDC maximum working voltage → the signal voltage plus common-mode voltage must remain within the adapter’s documented limit.
- Multichassis-system role → in a chained SCXI installation, the SCXI-1349 is used at the last chassis in the chain to connect to the DAQ device.
- Switch-module exclusion → NI documentation identifies the SCXI-1349 as unsuitable for SCXI switch modules, so switch-module systems require a different connection approach.

SCXI-1349

SCXI-1349
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| DAQ device | 68-pin E Series DAQ devices, excluding DAQCards | Confirm the DAQ device has the required 68-pin connector. |
| DAQ cable | SH68-68-EP shielded cable | Included as part of the SCXI-1349 shielded cable assembly. |
| SCXI module | Compatible SCXI module with rear 50-pin signal connector | The adapter connects to the module’s rear signal connector. |
| SCXI accessory | SCXI-1180 feedthrough panel or CB-50 terminal block | Connect through the adapter’s 50-pin male breakout connector. |
| Multichassis system | Last chassis in a chained SCXI system | Use the SCXI-1349 at the chassis connected to the DAQ device. |
| Switch modules | Not supported | NI documentation identifies switch modules as unsupported with this adapter. |
| EMC performance | Shielded cables required | Use shielded cabling to maintain the documented EMC performance. |
NI’s installation guidance identifies the SCXI-1349 as the connection point between an SCXI module and an E/M/S Series DAQ device, with the applicable cable and module configuration determining the complete system.
Detailed Product Overview
Connection between SCXI and DAQ hardware
The SCXI-1349 is a shielded cable adapter assembly consisting of an adapter and an SH68-68-EP shielded cable. Its purpose is to connect a compatible SCXI module to a 68-pin E Series DAQ device.
The adapter connects to the rear 50-pin signal connector of the SCXI module. The 68-pin end of the included cable connects to the DAQ device. NI documentation describes this connection as the path through which signals from the SCXI module reach the DAQ hardware.
Breakout connector supports accessories
In addition to the DAQ and SCXI-module connections, the SCXI-1349 includes a 50-pin male breakout connector. NI identifies compatible accessories including the SCXI-1180 feedthrough panel and CB-50 terminal block.
This breakout capability allows the adapter to serve as part of a broader signal-routing arrangement rather than only as a direct module-to-DAQ cable connection.
Multichassis installation role
In a cascaded SCXI system, the SCXI-1349 is used in the last chassis in the chain—the chassis connected to the DAQ device. The other chassis in the chain use SCXI-1346 multichassis cable adapters.
NI’s cascading guidance describes the SCXI-1349 as the adapter inserted into the rear 50-pin connector of the module that passes analog signals to the DAQ device. This makes the adapter’s position in the chassis chain a key installation detail.
Electrical and environmental limits
NI documentation specifies a maximum working voltage of 30 Vrms, 42 Vpk, or 60 VDC, defined as the signal voltage plus common-mode voltage. The adapter’s operating range is 0 to 50°C, with storage from -20 to 70°C and 10 to 90% relative humidity, noncondensing.
The adapter is classified for Measurement Category I, Pollution Degree 2, and requires shielded cables to maintain its documented EMC performance.
Applications & System Role
The SCXI-1349 is the cable-and-connector interface between an SCXI signal-conditioning module and a compatible NI DAQ device. It carries the conditioned signals from the SCXI module to the DAQ hardware for acquisition.
A technical-fit scenario is a multichannel measurement system in which an SCXI module conditions field signals and an E Series DAQ device digitizes them. The SCXI-1349 provides the shielded connection path and can also expose a breakout connector for an accessory such as a feedthrough panel or terminal block.
FAQ
What is the NI SCXI-1349?
It is a shielded cable adapter assembly that connects compatible SCXI modules to 68-pin E Series NI DAQ devices.
Which DAQ devices does it support?
It supports 68-pin E Series DAQ devices, excluding DAQCards.
What cable is included?
The SCXI-1349 assembly includes an SH68-68-EP shielded cable.
How does it connect to an SCXI module?
It connects to the rear 50-pin signal connector of a compatible SCXI module.
Does it provide an accessory connection?
Yes. It includes a 50-pin male breakout connector for compatible accessories such as the SCXI-1180 feedthrough panel or CB-50 terminal block.
Can it be used with SCXI switch modules?
No. NI documentation identifies the SCXI-1349 as not supported with SCXI switch modules.
What is its maximum working voltage?
The maximum working voltage is 30 Vrms, 42 Vpk, or 60 VDC, defined as signal voltage plus common-mode voltage.
Where is it used in a multichassis SCXI system?
It is used in the last chassis in the chain, which is the chassis connected to the DAQ device.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626