Sale!

NI SH68-68-EP 68-Pin Shielded Noise-Rejecting DAQ Cable

The National Instruments (NI) SH68-68-EP is a high-performance, noise-rejecting 68-conductor shielded cable engineered to connect compatible NI data acquisition (DAQ) hardware to external terminal blocks, signal conditioning accessories, and breakout enclosures. Featuring 68-pin 0.050 D-type male (D-Sub/SCSI) connectors at both ends, the cable establishes point-to-point pin continuity for analog input, analog output, digital I/O, and counter/timer signals.

Categories: , , , , SKU: SH68-68-EP Brand:

Description

Core Product Summary (Brand / Model / Key Attributes)

The National Instruments (NI) SH68-68-EP is a high-performance, noise-rejecting 68-conductor shielded cable engineered to connect compatible NI data acquisition (DAQ) hardware to external terminal blocks, signal conditioning accessories, and breakout enclosures. Featuring 68-pin 0.050 D-type male (D-Sub/SCSI) connectors at both ends, the cable establishes point-to-point pin continuity for analog input, analog output, digital I/O, and counter/timer signals.

Designed for noise reduction in demanding test and measurement environments, the SH68-68-EP features individually shielded analog input pairs and isolated digital line groupings within an overall outer shield jacket. Available in standard lengths of 1 m, 2 m, 5 m, and 10 m, the cable utilizes 28 AWG signal conductors and heavier 20 AWG +5 V power lines to minimize voltage drop across extended accessory cable runs.

 

Key Technical Specifications

Specification Value / Detail
Product Type Shielded Noise-Rejecting I/O Cable Assembly
Model Reference NI SH68-68-EP
Part Numbers 184749-01 (1 m), 184749-02 (2 m), 184749-05 (5 m), 184749-10 (10 m)
Connector Type (Both Ends) 68-Pin 0.050 D-Type Male (SCSI-II D-Sub)
Signal Conductor Gauge 28 AWG (0.070 Ω/ft max at 20 °C)
Power Conductor Gauge (+5 V) 20 AWG (0.012 Ω/ft max at 20 °C)
Analog Pair Impedance 66 ± 8 Ω (differential, typical @ TDR)
Analog Pair Capacitance 25.5 pF/ft maximum (mutual, typical)
Digital Pair Impedance 100 ± 15 Ω (differential, typical @ TDR)
Digital Pair Capacitance 17.5 pF/ft maximum (mutual, typical)
Outer Shielding Overall shield braid with individual analog pair shields

 

Detailed Product Overview

The NI SH68-68-EP serves as an essential interconnecting bus cable between National Instruments 68-pin DAQ boards—including E Series, S Series, B Series, and USB M Series devices—and external terminal accessories such as the BNC-2090A, BNC-2110, CB-68LP, and SCXI signal conditioning chassis.

Unlike standard unshielded ribbon cables, the internal construction of the SH68-68-EP separates sensitive analog input channels from high-speed digital switching signals. Individually shielded twisted pairs reduce cross-talk and channel-to-channel interference during differential voltage measurements. The larger 20 AWG power wires reduce line resistance for field accessories that draw +5 V power directly from the host DAQ device.

SH68-68-EP

SH68-68-EP

SH68-68-EP

SH68-68-EP

Engineering Selection Highlights

  • Individual Analog Pair Shielding: Reduces channel crosstalk and external electromagnetic noise pickup on low-level analog input signals.
  • Dedicated 20 AWG Power Lines: Minimizes voltage drops on +5 V DC power distribution channels feeding connected accessories.
  • Durable 68-Pin D-Sub Connectors: Features ruggedized 0.050 D-type connectors with thumbscrews or latches for strain relief and secure mating.
  • Multifunction Signal Layout: Supports simultaneous routing of analog inputs, analog outputs, digital lines, and counter signals over a single cable harness.
  • Broad DAQ Hardware Compatibility: Designed specifically for NI 68-pin SCSI-II interfaces on PCI, PXI, and USB data acquisition modules.

 

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Compatible Host Hardware NI E Series, S Series, B Series, and USB M Series DAQ devices Connects to standard 68-pin SCSI-II 0.050 D-type female ports
Compatible Accessories NI SCB-68, BNC-2090A, BNC-2110, BNC-2111, CB-68 Series terminal blocks Matches 68-pin D-sub accessory receptacles
Mechanical Latching Mating jackscrews / thumbscrews Ensure thumbscrews are hand-tightened to maintain earth shield continuity

 

Dimensions, Mounting & Connection Notes

  • Cable Length Options: Offered in 1-meter, 2-meter, 5-meter, and 10-meter pre-terminated lengths.
  • Bend Radius: Avoid sharp bends near the connector backshell to prevent strain on internal foil shields and drain wires.
  • Ground Continuity: The metal outer backshells bond directly to the outer braid shield, establishing grounding paths when connected to grounded DAQ chassis or accessory enclosures.

 

FAQ

What is the National Instruments SH68-68-EP?

The NI SH68-68-EP is a 68-pin shielded, noise-rejecting cable used to connect NI 68-pin data acquisition devices to external accessories and terminal blocks.

What is the difference between signal and power wire gauges in this cable?

The cable uses 28 AWG wire for analog and digital signal channels and larger 20 AWG wire for +5 V power lines to reduce voltage drops.

Which DAQ series hardware uses the SH68-68-EP cable?

It connects to NI E Series, S Series, B Series, and USB M Series multifunction DAQ boards equipped with 68-pin 0.050 D-type connectors.

Is the cable individually shielded?

Yes, in addition to an overall cable shield, the analog input pairs inside the SH68-68-EP are individually shielded to minimize crosstalk and environmental noise.

 

Verification & Troubleshooting Notes

  • Connection Checks: Verify that both 68-pin connectors are fully seated and secured using the integrated thumbscrews to ensure proper ground contact.
  • Noise Inspection: If high-frequency noise affects analog channels, verify that external terminal blocks (e.g., SCB-68) are properly tied to system ground.
  • Pin Inspection: Inspect male pin contacts before insertion to prevent bent pins during installation into high-density 0.050 connectors.