Description
Key Technical Specifications
| Parameter | Value |
| Motor Series | MINAS Series (Low Inertia Type) |
| Rated Output Power | 750 W (0.75 kW) |
| Rated Voltage | 200 VAC |
| Feedback Device | High-resolution 20-bit absolute / incremental encoder |
| Shaft Design | Straight shaft with keyway |
| Holding Brake | Without holding brake (Standard configuration) |
| Protection Class | IP65 (excluding shaft pass-through) |
| Operating Temperature | 0^\circC to +40^\circC |
| Storage Temperature | -20^\circC to +80^\circC |
| Compliance Standards | CE, UL, cUL, RoHS |
Product Introduction & Supply Chain Strategy
The Panasonic MSMD082S1U is a high-performance, low-inertia AC servo motor engineered for rapid acceleration, deceleration, and precision positioning in automated machinery. Part of the widely deployed MINAS motion control platform, it delivers exceptional dynamic response across electronics assembly, semiconductor manufacturing, and high-speed packaging lines.
Securing this replacement unit as a Brand New Surplus asset shields plant operations from unexpected hardware failures and long component lead times. Sourcing genuine, factory-fresh motors eliminates the hidden bearing wear, winding insulation degradation, and feedback device fatigue inherent in repaired or second-hand units, protecting Total Cost of Ownership (TCO) and securing long-term line reliability.
Installation & Configuration Guide
- Stage 1: Pre-Installation (Prep & Safety): Enforce strict lock-out/tag-out (LOTO) procedures on the matching servo amplifier and incoming 3-phase/single-phase 200 VAC power lines. Put on an ESD grounding wrist strap. Inspect the motor shaft and mounting flange for protective coating residues and clean using approved solvents.
- Stage 2: Removal: Disconnect power cables and encoder feedback connectors from the legacy motor. Support the motor weight securely before unbolting the flange to prevent mechanical binding or damage to alignment pins.
- Stage 3: Installation (Clone & Seat): Align the MSMD082S1U precisely with the mechanical load, gearbox, or mounting bracket interface. Torque mounting bolts evenly in a cross-pattern to manufacturer specifications. Connect power leads and encoder wiring, ensuring proper shield grounding and mechanical strain relief.
- Stage 4: Power-On & Testing: Verify insulation resistance across power phases prior to energizing. Power up the servo drive at a low override speed, check encoder communication and absolute position handshakes, monitor motor temperature and vibration feedback, and validate axis homing routines.

MSMD082S1U

MSMD082S1U
Firmware/Software Versions & Upgrade Notes
- Recommended Baseline: Match the associated Panasonic Minas servo drive firmware version to current operational baselines established for the MSMD motor family.
- Compatibility Notes: Verify encoder resolution settings and electronic gear ratios within the servo amplifier parameter set upon replacement to ensure correct scaling and tracking.
- Upgrade Warning: Avoid arbitrary firmware updates or drive parameter changes during a hardware swap unless resolving a documented control loop anomaly. Always back up existing drive parameter datasets via PANATERM software before connecting a replacement motor.
Frequently Asked Questions (FAQ)
- Are these servo motors truly new or refurbished?
This unit is a Brand New Surplus part, preserved in factory-original packaging, completely unused, and never installed or repaired.
- Why choose New Surplus over a cheaper refurbished unit?
Refurbished motors often feature degraded winding insulation, worn ball bearings, and fatigued optical encoder disks. Saving minimal capital on a used motor introduces catastrophic risk; an unexpected line outage can cost substantially more than the motor purchase price.
- What is the strategic inventory plan for this part?
Because high-utilization servo axes dictate overall plant throughput, maintaining 1 unit of buffer stock on-site acts as an essential insurance policy for critical automation cells.
- Does this motor include an integrated holding brake?
The standard MSMD082S1U configuration does not include a holding brake. Verify whether your vertical or gravity-load axis requires an external braking mechanism before installation.
- What warranty terms are included?
Every New Surplus MSMD082S1U unit is backed by a comprehensive 1-to-2 year operational warranty, ensuring absolute reliability for mission-critical automation systems.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626