Sale!

Parker ZETA4 4 A Microstepping Drive with Active Damping

Parameter Value
Product type Packaged microstepping drive
Series ZETA (Compumotor)
Model ZETA4
Motor current 0–4 A peak (adjustable)
Continuous current Approx. 2.8 A RMS
AC power input 95–132 VAC single-phase, 50/60 Hz
Bus voltage 170 VDC nominal
Resolution 16 selectable settings: 200 to 50,800 steps/rev
Command input Step/Direction or CW/CCW
Categories: , , , , SKU: ZETA4 Brand:

Description

Core Product Summary

The Parker ZETA4 is a stand-alone packaged microstepping drive designed for two-phase hybrid step motors. It operates from single-phase 95–132 VAC and provides adjustable motor current up to 4 A peak.

It incorporates Parker’s Active Damping and Electronic Viscosity technologies to reduce resonance, improve acceleration, lower vibration, and decrease settling time. The drive accepts industry-standard step-and-direction or CW/CCW command signals and offers 16 selectable microstep resolutions.

 

Key Technical Specifications

Parameter Value
Product type Packaged microstepping drive
Series ZETA (Compumotor)
Model ZETA4
Motor current 0–4 A peak (adjustable)
Continuous current Approx. 2.8 A RMS
AC power input 95–132 VAC single-phase, 50/60 Hz
Bus voltage 170 VDC nominal
Resolution 16 selectable settings: 200 to 50,800 steps/rev
Command input Step/Direction or CW/CCW
Amplifier type 20 kHz fixed-frequency PWM, current-controlled bipolar
Motor type 2-phase hybrid permanent-magnet, 1.8°
Recommended motor inductance 5–50 mH (0.5 mH min, 100 mH max)
Accuracy (typical, unloaded) ±5 arc-min
Repeatability (typical) ±5 arc-sec
Operating temperature 0 °C to 45 °C
Protections Phase-to-phase & phase-to-ground short circuit, overtemperature, undervoltage, power dump
Status indicators Power, Step, Overtemp, Motor Fault
Approvals CE (LVD), UL Recognized, cUL Recognized

 

Engineering Selection Highlights

  • Active Damping technology provides damping ratios up to 0.5, higher acceleration capability, reduced motor vibration, and increased shaft power compared with conventional microstepping drives.
  • Electronic Viscosity reduces settling time after moves, improves low-speed smoothness, and lowers audible noise.
  • 16 selectable microstep resolutions allow optimization for smoothness or positioning accuracy (up to 50,800 steps/rev).
  • Direct 120 VAC operation with internal 170 VDC bus eliminates the need for an external DC supply.
  • Comprehensive protection circuits include motor short-circuit (phase-to-phase and phase-to-ground), overtemperature, undervoltage, and regenerative power dump.
  • Removable connectors simplify installation and maintenance.
  • Compatible with a wide range of 2-phase hybrid step motors (4-, 6-, or 8-lead).
  • Automatic standby current reduction helps limit motor heating when idle.
ZETA4

ZETA4

ZETA4

ZETA4

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Motor 2-phase hybrid PM step motor, 1.8° Series or parallel wiring supported
Command source Indexer or motion controller providing step/direction or CW/CCW signals Optically isolated inputs
Power 95–132 VAC single-phase Direct AC connection
Motor inductance 5–50 mH recommended Outside this range may affect performance
Environment 0 °C to 45 °C operating Adequate ventilation required

 

Dimensions, Mounting & Connection Notes

  • Packaged industrial enclosure with mounting flanges.
  • Removable screw-terminal or connector interfaces for motor, power, and control signals.
  • Front-panel status LEDs for Power, Step activity, Overtemperature, and Motor Fault.
  • Grounding provisions on the chassis.
  • Typical mounting: panel or chassis mount with clearance for cooling.

 

Detailed Product Overview

The Parker ZETA4 belongs to the Compumotor ZETA family of microstepping drives. It is a fully packaged, stand-alone unit that converts standard step-and-direction (or CW/CCW) command signals into precise current waveforms for two-phase hybrid step motors.

Power is taken directly from a single-phase 95–132 VAC supply. An internal power stage produces a nominal 170 VDC bus and delivers adjustable peak current from 0 to 4 A. The amplifier uses a 20 kHz fixed-frequency PWM topology with MOSFET power devices and closed-loop current control.

Two proprietary technologies distinguish the ZETA series. Active Damping continuously adjusts the drive’s response to suppress mid-range resonance, allowing higher acceleration rates, reduced vibration, and greater usable torque. Electronic Viscosity provides additional damping at the end of moves and at low speeds, shortening settling time and improving velocity smoothness.

Resolution is set by DIP switches or configuration to one of 16 values ranging from full-step (200 steps/rev) to 50,800 steps/rev. Waveform shaping options (pure sine or selected third-harmonic content) further optimize smoothness versus accuracy.

Protection features include detection of phase-to-phase and phase-to-ground short circuits, overtemperature, undervoltage (brown-out), and a power-dump circuit that absorbs regenerative energy. Front-panel LEDs indicate power status, presence of step pulses, overtemperature, and motor fault conditions.

The drive is designed for use with Compumotor-compatible or third-party 2-phase hybrid motors having 4, 6, or 8 leads. Recommended motor inductance is 5–50 mH. Automatic standby current reduction reduces motor heating during idle periods.

The ZETA4 is CE (LVD) and UL/cUL recognized. It is intended for industrial environments operating between 0 °C and 45 °C with adequate airflow.

 

Applications & System Role

The ZETA4 is used as a single-axis microstepping drive in automated machinery requiring precise positioning with hybrid step motors. Typical applications include packaging equipment, labeling machines, medical devices, laboratory automation, material handling, and general industrial positioning systems where smooth low-speed operation and reduced resonance are important.

It receives step and direction (or CW/CCW) pulses from an external indexer or motion controller and drives the connected step motor with selectable microstepping resolution.

 

FAQ

What is the Parker ZETA4?
It is a packaged microstepping drive that supplies up to 4 A peak to two-phase hybrid step motors from a 120 VAC supply.

What command signals does it accept?
Industry-standard step-and-direction or CW/CCW pulse trains.

What are Active Damping and Electronic Viscosity?
Active Damping reduces resonance and improves acceleration; Electronic Viscosity shortens settling time and improves low-speed smoothness.

What resolutions are available?
Sixteen selectable resolutions from 200 to 50,800 steps per revolution.

What power supply is required?
Single-phase 95–132 VAC, 50/60 Hz. No external DC supply is needed.

What motors can be used?
Two-phase hybrid permanent-magnet step motors (1.8°), preferably with inductance in the 5–50 mH range.

Is the drive still in production?
The ZETA series is a legacy product line. Availability of new units is limited; refurbished or surplus units are commonly offered by industrial suppliers.