Description
Core Product Summary
The Parker ZETA6104 is a single-axis microstepping indexer and drive from the Compumotor ZETA6000 series, designed for precise motion control in industrial automation applications. It integrates drive electronics and motion programming into a single compact unit, eliminating the need for a separate indexer card. The unit operates on a 95–132 VAC, 50/60 Hz single-phase power supply and supports peak output currents up to 4.0 A, depending on the connected stepper motor.
Engineered for reliable system integration, the ZETA6104 features comprehensive communication options, including a dedicated RS-232C port and a second serial port configurable for RS-232C or RS-485 via internal jumpers. It provides 16 optically isolated programmable inputs and 9 programmable open-collector outputs, alongside dedicated connections for home, positive/negative limits, and trigger signals. Integrated damping technologies, such as anti-resonance and active damping, minimize mechanical ringing and enhance low-speed smoothness without requiring external tuning hardware.
Key Technical Specifications
| Parameter | Verified Specification |
|---|---|
| Product Family | Parker Compumotor ZETA6000 Series |
| Product Type | 1-Axis Microstepping Indexer/Drive |
| Input Power | 95–132 VAC, 50/60 Hz, single-phase |
| Peak Output Current | Up to 4.0 A (motor-dependent) |
| Position Range | ±2,147,483,648 steps |
| Velocity Range | 1 to 2,000,000 steps/sec |
| Acceleration Range | 1 to 24,999,975 steps/sec² |
| Motion Algorithm Update Rate | 2 ms |
| Communication Interfaces | COM1: RS-232C; COM2: RS-232C or RS-485 (configurable via internal jumpers) |
| Programmable Inputs | 16 general-purpose (HCMOS compatible, optically isolated, 0–24 VDC) |
| Programmable Outputs | 9 general-purpose (open collector, optically isolated, sink up to 300 mA) |
| Encoder Interface | Differential comparator for two-phase quadrature incremental encoders (max 5 VDC, 1.6 MHz) |
| Operating Temperature | 0°C to 45°C (32°F to 113°F) |
| Over-Temperature Protection | Shutdown fault at 55°C (131°F) |
Detailed Product Overview
The Parker ZETA6104 serves as a unified motion control solution, combining a microstepping drive and a programmable indexer into a single chassis. This integration reduces cabinet space, simplifies wiring, and lowers the overall component count for single-axis applications such as packaging machinery, material handling, and precision positioning stages. By accepting 95–132 VAC input power directly, it streamlines power distribution in standard North American and compatible international industrial control panels.
A defining characteristic of the ZETA6104 is its advanced motion algorithm, which includes built-in anti-resonance, active damping, and electronic viscosity features. These technologies actively suppress the mechanical ringing and mid-band resonance inherent in traditional stepper motor systems, resulting in smoother low-speed operation and higher usable torque without the need for external mechanical dampers or complex tuning procedures. The drive supports a velocity range up to 2,000,000 steps per second and an acceleration range up to 24,999,975 steps per second squared, with a motion algorithm update rate of 2 milliseconds for deterministic trajectory execution.
System integration is facilitated by robust communication and I/O capabilities. The unit features two serial communication ports: COM1 is dedicated to RS-232C, while COM2 can be configured for either RS-232C or 4-wire/2-wire RS-485 through internal jumper settings (JU1–JU7). This allows the ZETA6104 to be daisy-chained in a multi-drop network of up to 99 units. The programmable I/O matrix includes 16 optically isolated inputs and 9 optically isolated open-collector outputs, all compatible with 5–24 VDC logic levels. Dedicated hardware inputs are provided for home (HOM), positive/negative limits (POS, NEG), and hardware triggers (TRG-A, TRG-B, P-CUT), ensuring rapid response to critical machine events independent of the serial communication cycle time.
For applications requiring closed-loop verification, the ZETA6104 includes a differential encoder input capable of accepting two-phase quadrature incremental encoders with differential or single-ended outputs up to 1.6 MHz. This allows the system to monitor actual motor position and detect missed steps. The unit is designed for chassis mounting, with clearances specified for heat dissipation, and includes an internal over-temperature shutdown fault at 55°C to protect the drive electronics under demanding duty cycles.

ZETA6104

ZETA6104
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Motor Compatibility | Parker Compumotor ZETA, OS, and RS series stepper motors | Verify peak current and voltage requirements against the specific motor datasheet. |
| Communication Network | RS-232C point-to-point or RS-485 multi-drop | RS-485 requires internal jumper reconfiguration (JU1–JU6 to position 1) and proper bus termination. |
| Logic Power Supply | 5–24 VDC for I/O sourcing/sinking | The internal +5V output is available but limited to a total load of 0.5 A across all I/O connections. |
| Enclosure Environment | NEMA 12 or IP54 rated control cabinet | The unit requires a clean, dry environment with adequate ventilation to maintain the 0°C to 45°C operating range. |
| Engineering Software | Parker Compumotor 6000 Series programming software | Required for configuring motion profiles, I/O mapping, and damping parameters. |
Dimensions, Mounting & Connection Notes
- Overall Width: 173.1 mm (6.813 inches)
- Overall Height: 218.4 mm (8.600 inches to bottom of chassis)
- Mounting Method: Chassis mounting via integrated feet; requires adequate clearance around the unit for convective heat dissipation.
- Power Connection: Single-phase AC input via dedicated terminal block; requires appropriate branch circuit protection.
- I/O Connections: High-density D-sub connectors for programmable I/O, encoder, and serial communications.
- Grounding: A reliable protective earth connection to the chassis is mandatory to minimize electromagnetic emissions and ensure operator safety.
- RS-485 Termination: For multi-drop RS-485 networks, the last unit in the chain requires internal DIP switch configuration to enable 120 Ω terminating resistors and 681 Ω bias resistors, or external resistors must be applied.
FAQ
What is the Parker ZETA6104?
It is a single-axis microstepping indexer and drive from the Parker Compumotor ZETA6000 series, designed to provide integrated motion control and power amplification for stepper motors.
What is the maximum output current of the ZETA6104?
The drive can supply a peak output current of up to 4.0 A, though the exact limit depends on the specific stepper motor model connected and its thermal characteristics.
Can the ZETA6104 be networked with other drives?
Yes, by configuring the COM2 port for RS-485 communication via internal jumpers, up to 99 ZETA6104 units can be addressed in a multi-drop network.
Does the ZETA6104 support closed-loop encoder feedback?
Yes, it features a differential encoder input that accepts two-phase quadrature incremental encoders with a maximum frequency of 1.6 MHz and 5 VDC logic levels.
What damping features are built into the drive?
The ZETA6104 includes integrated anti-resonance, active damping, and electronic viscosity algorithms to minimize mechanical ringing and improve low-speed smoothness.
What are the power requirements for the programmable I/O?
The programmable inputs and outputs are optically isolated and operate on 5–24 VDC logic levels. An internal +5 VDC supply is available, but the total load across all I/O connections must not exceed 0.5 A.
Documented Performance Data
- Velocity Range: 1 to 2,000,000 steps/sec
- Velocity Accuracy: ±0.02% of maximum rate
- Velocity Repeatability: ±0.02% of set rate
- Acceleration Range: 1 to 24,999,975 steps/sec²
- Position Range: ±2,147,483,648 steps
- Stepping Accuracy: ±0 steps from preset total
- Motion Algorithm Update Rate: 2 ms
- Maximum RS-485 Cable Length: 1,220 meters (4,000 feet)

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626