Sale!

Philips 7122.714.1200.2 DICM Digital Control PCB Card

Parameter Value
Part Number 7122.714.1200.2
Designation DICM, Digital Control Card
Product Type PCB control board / plug-in module
Associated System ASML PAS 5000/2500 Wafer Stepper
Weight 0.20 kg
Categories: , , , , SKU: 7122.714.1200.2 DICM Brand:

Description

Core Product Summary

Philips 7122.714.1200.2, also referenced as DICM, is a digital control PCB card designed for ASML PAS 5000/2500 wafer stepper systems. It functions as a dedicated motor and motion control board within the lithography machine’s internal control architecture.

This board is a rack-mounted plug-in module built for integration into the PAS 5000/2500 control chassis. It handles digital motion control tasks required for wafer positioning and actuator sequencing inside the semiconductor lithography platform.

 

Key Technical Specifications

Parameter Value
Part Number 7122.714.1200.2
Designation DICM, Digital Control Card
Product Type PCB control board / plug-in module
Associated System ASML PAS 5000/2500 Wafer Stepper
Weight 0.20 kg

 

Detailed Product Overview

The Philips 7122.714.1200.2 DICM card is a subsystem motion controller manufactured for integration into ASML PAS 5000/2500 lithography tools. DICM provides digital control for the machine’s motor and positioning actuators, supporting precise wafer handling and exposure-stage sequencing during semiconductor wafer patterning operations.

It is a single-board plug-in module that occupies a slot in the system’s control rack. The card receives setpoint and command signals from the main machine controller and executes local closed-loop motion control for assigned axes. Its role is critical to maintaining the positioning accuracy required for photolithography exposure cycles.

This spare is used within legacy wafer stepper maintenance workflows. Replacement and installation require matching the part number revision to the existing PAS 5000/2500 machine configuration, as different DICM variants carry different firmware and signal definitions. Service and replacement demand typically comes from fab maintenance teams performing component swap and fault isolation on older lithography platforms.

7122.714.1200.2 DICM

7122.714.1200.2 DICM

7122.714.1200.2 DICM

7122.714.1200.2 DICM

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Host System ASML PAS 5000/2500 Wafer Stepper Designed specifically for this lithography platform
Form Factor Rack plug-in control card Installs into the PAS 5000/2500 control chassis slot
Function Assignment Local motor / digital motion control Matches DICM axis control function for the stepper

 

FAQ

Q: What is Philips 7122.714.1200.2 DICM? A: It is a digital control PCB card used as a motor and motion controller inside ASML PAS 5000/2500 wafer stepper lithography equipment.

Q: Which system does the 7122.714.1200.2 DICM work with? A: It is built for the ASML PAS 5000/2500 wafer stepper platform.

Q: What function does the DICM card perform? A: It executes local digital motion and motor control for positioning actuators and wafer stage sequencing during lithography exposure.

Q: What is the weight of the 7122.714.1200.2 module? A: The unit weight is 0.20 kg.

Q: Is this board a standard PLC I/O card? A: No, it is a dedicated lithography subsystem controller, not a general-purpose PLC I/O add-on board.

Q: Are there related part variants for this DICM design? A: Yes, sequential variants including 7122.714.1200.4 and 7122.714.1200.5 exist; each variant must be cross-checked against the machine configuration before replacement.