Description
Core Product Summary
The Philips PE-195726 is a multi-output switch-mode power supply in the PE19 series. It converts AC mains to regulated DC voltages for industrial control and electronic systems.
It accepts 110/230 V AC input (10 A/5 A) and delivers 5 V at 70 A together with two 12 V outputs rated 8 A and 6 A. The unit is intended for applications requiring simultaneous high-current low-voltage and auxiliary 12 V rails.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Product type | Multi-output switch-mode power supply |
| Series | PE19 |
| Input voltage | 110/230 V AC |
| Input current | 10 A / 5 A |
| Input frequency | 47–63 Hz |
| Output 1 | 5 V / 70 A |
| Output 2 | 12 V / 8 A |
| Output 3 | 12 V / 6 A |
| Approximate power | 450 W |
Engineering Selection Highlights
- Multi-rail output set (5 V/70 A + dual 12 V) matches systems that need a high-current logic supply plus separate auxiliary voltages.
- Dual-range AC input (110/230 V, 10 A/5 A) supports both North American and European mains without external transformers.
- PE19 series form factor and connector style determine rack or chassis compatibility in existing installations.
- Combined output capacity near 450 W requires verification that the thermal environment and load distribution stay within the unit’s continuous ratings.
- Exact model PE-195726 (also referenced as PE1957/26 or PE195726) must be confirmed against the system’s voltage and current demands before substitution.
Detailed Product Overview
The Philips PE-195726 belongs to the PE19 family of industrial switch-mode power supplies. Its primary role is to take single-phase AC mains and produce three regulated DC outputs that can be used simultaneously.
The 5 V channel is dimensioned for loads up to 70 A, making it suitable for systems with substantial digital circuitry or multiple parallel modules. The two 12 V channels (8 A and 6 A) provide independent auxiliary power, allowing separation of noisy or high-current peripherals from the main logic rail.
Input design covers both 110 V and 230 V nominal mains with corresponding current ratings of 10 A and 5 A, and operates across the 47–63 Hz frequency range. This dual-range capability simplifies inventory and installation across different geographic regions.
Because the unit is a multi-output converter, load distribution among the three rails affects thermal performance and regulation. Engineers must ensure that the sum of the output powers remains within the approximate 450 W continuous capability and that individual rail currents do not exceed the stated limits.
Mechanical and electrical interfaces follow the PE19 series conventions; therefore, replacement or new integration requires confirmation of connector pin-out, mounting dimensions, and any required enable or sense signals specific to the host system. No additional external transformers or intermediate conversion stages are needed when the input and output ratings match the application.

PE-195726

PE-195726
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Input supply | 110/230 V AC, 47–63 Hz | Select correct input range for local mains |
| Output loads | 5 V rail up to 70 A; 12 V rails up to 8 A and 6 A | Total load must remain within continuous ratings |
| Series / form factor | PE19 series | Mechanical and connector fit must match existing PE19 installations |
Applications & System Role
The PE-195726 functions as a central multi-rail DC power source in industrial electronic assemblies. It supplies the main low-voltage bus (typically logic or processor circuits) at 5 V with high current capability while simultaneously providing two independent 12 V rails for sensors, actuators, relays, or communication interfaces.
It is used where a single AC-to-DC conversion stage must feed several voltage domains without additional intermediate converters. Integration occurs at the power-input stage of control cabinets, instrument racks, or sub-assemblies that require stable, concurrent DC supplies.
FAQ
What is the Philips PE-195726?
It is a multi-output switch-mode power supply that converts 110/230 V AC into regulated 5 V and dual 12 V DC rails.
Which series does the PE-195726 belong to?
It belongs to the PE19 series of industrial power supplies.
What are the main output ratings?
5 V at up to 70 A, 12 V at up to 8 A, and a second 12 V rail at up to 6 A.
What input voltage does it accept?
It accepts 110 V or 230 V AC at 47–63 Hz with input currents of 10 A or 5 A respectively.
What is the approximate total output power?
Approximately 450 W under continuous operation within the rated currents.
Is the PE-195726 a single- or multi-rail supply?
It is a multi-rail unit providing three independent DC outputs simultaneously.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626