Description
Key Technical Specifications
| Parameter | Value |
| Backplane Current Load | 800 mA at 5 V DC; 3 mA at 24 V DC |
| Operating Temperature | 0 to 60°C (32 to 140°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Relative Humidity | 5% to 95% non-condensing |
| Communication Ports | Two RS-232/422/485 configurable DB9 ports |
| Flow Calculation Standards | AGA-3 (Orifice), AGA-7 (Turbine), AGA-8 (Compressibility), API 2540 (Volume Correction) |
| Enclosure Type | Standard ControlLogix single-slot wide module |
| LED Indicators | Module Status, Backplane Transfer, Port Rx/Tx, Error Status |
| Memory Configuration | Non-volatile flash configuration storage with battery-backed RAM |
| Data Logging | Hourly and daily historical flow logs stored on-board |
Product Introduction & Supply Chain Strategy
The ProSoft Technology MVI56-LTQ is a specialized flow computer module built for Rockwell Automation ControlLogix systems, designed to perform real-time calculation of hydrocarbon liquid and natural gas flow. Utilizing recognized industry standards like AGA and API, it interfaces directly with pressure, temperature, and differential flow meters for custody transfer applications.
Because the MVI56-LTQ handles fiscal metering and billing verification, hardware reliability is vital. Sourcing this unit as genuine New Surplus eliminates the hidden risks of refurbished components, such as failing crystal oscillators or unstable clock timing that can corrupt integration calculations. Maintaining a factory-fresh spare unit protects your custody transfer system against severe financial penalties from measurement drift or unplanned downtime.
Installation & Configuration Guide
1.Pre-Installation (Prep & Safety):Tools needed: ESD wrist strap, Multimeter, RS-232 cable.
Initiate a safety lock-out/tag-out (LOTO) procedure on the ControlLogix chassis. Put on a grounded ESD wrist strap. Back up the existing flow configuration and capture screenshots or notes of all meter factor settings, AGA parameters, and Modbus mapping registers.
Verification: Check that the chassis power supply is off and backplane power reads 0 V DC using a multimeter.
2.Removal:Hardware extraction.
Disconnect the serial communication cables from the front DB9 ports. Depress the top and bottom retaining clips and pull the MVI56-LTQ module straight out of the slot.
Verification: Inspect the chassis slot pins to confirm none are bent or contaminated with dust.
3.Installation (Clone & Seat):Hardware mounting.
Align the new surplus module with the chassis slot guides and push firmly until the latches click into place. Reconnect the serial communication cables.
Verification: Confirm the module is fully seated flush against the rack and latches are secure.
4.Power-On & Testing:System startup.
Restore power to the chassis. Observe the LED startup sequence and download the flow configuration file via ProSoft Configuration Builder or ladder logic transfer.
Verification: Verify that the OK LED turns solid green and polling lights indicate active data exchange with field meters.

MVI56-LTQ

MVI56-LTQ
Firmware/Software Versions & Upgrade Notes
- Recommended Firmware: Version 1.04 or later provides stable calculation execution and resolves memory buffer issues found in initial production releases.
- Compatibility Notes: Requires ControlLogix processor firmware version 13 through 20 (or compatible legacy environments). Ensure ProSoft Configuration Builder (PCB) matches the module firmware version before attempting configuration downloads.
- Upgrade Risk Warning: Never update firmware on an active custody transfer meter run during active batch operations, as resetting the module will clear temporary accumulator registers and interrupt official volume logging.
Frequently Asked Questions (FAQ)
Is this MVI56-LTQ module completely new and unused?
Yes. This unit is a Brand New Surplus item, preserved in original OEM anti-static packaging with pristine backplane pins and zero operating hours.
Why choose New Surplus for legacy flow computers?
Flow computers demand absolute calculation accuracy. Refurbished units often suffer from degraded internal timing clocks and worn components, which can cause calculation drift and compliance failures. New Surplus guarantees factory-level precision and long-term stability.
What warranty is included?
Every unit is backed by a full 1-year replacement warranty, ensuring absolute reliability for your critical metering infrastructure.
Can I hot-swap this module in a live chassis?
While ControlLogix supports Removal and Insertion Under Power (RIUP), it is strongly advised to pause measurement processing or power down the rack during installation to avoid corrupting active flow totalization registers.
How do I transfer my old meter configuration to the replacement?
You can export the configuration file from your existing module using ProSoft Configuration Builder (PCB) and upload it directly to the replacement unit via the configuration serial port.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626