Description
Core Product Summary
The Reliance 0-57510 is a 10-slot backplane designed for the AutoMax control system. It forms the interconnect structure within AutoMax 10-slot rack assemblies, enabling communication and power distribution among installed modules.
This backplane supports the Multibus architecture used by AutoMax processors, I/O modules, drive controllers, memory modules, and power supplies. It is the core printed-circuit assembly that provides the physical and electrical interface for modules in a 10-slot AutoMax rack.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Manufacturer | Reliance Electric |
| Model / Order Number | 0-57510 |
| Series | AutoMax |
| Product Type | 10-Slot Backplane |
| Slot Capacity | 10 |
| Bus Type | Multibus (associated with AutoMax rack architecture) |
| Compatible Rack | AutoMax 10-slot rack assemblies (e.g., 57C332 series) |
Detailed Product Overview
The Reliance 0-57510 serves as the backplane for AutoMax 10-slot rack systems. In the AutoMax architecture, the backplane provides the mechanical mounting points and the electrical bus connections that allow processor modules, I/O modules, drive control modules, memory modules, and power supplies to communicate and share power.
It is installed as the primary interconnect board within a 10-slot rack chassis. Modules plug into the backplane edge connectors, which carry the Multibus signals required for local system operation. The backplane supports the standardized bus structure used across the AutoMax family, enabling modular expansion within the limits of the 10 available slots.
System integrators use the 0-57510 when building or maintaining 10-slot AutoMax racks. Correct operation depends on proper module placement according to AutoMax slot rules (processor modules typically restricted to lower-numbered slots, common memory placement constraints, and grouping of related drive modules). The backplane itself does not contain active processing or power conversion; those functions are provided by the modules and the associated rack power supply.
Because the backplane is a foundational component, any replacement must match the exact AutoMax rack configuration to ensure mechanical fit and electrical compatibility with existing modules.

0-57510

0-57510
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| System Family | AutoMax (DCS 5000 / AutoMax PLC) | Required |
| Rack Assembly | AutoMax 10-slot rack (e.g., 57C332) | Backplane is the interconnect component of these racks |
| Bus Architecture | Multibus | Supports P1/P2 style bus connections used by AutoMax modules |
| Compatible Modules | AutoMax processors, I/O modules, drive controllers, memory modules, power supplies | Slot assignment rules of the AutoMax system apply |
| Slot Capacity | 10 slots | Determines maximum module population |
Dimensions, Mounting & Connection Notes
The 0-57510 is a printed-circuit backplane board designed for installation inside an AutoMax 10-slot rack chassis. Modules connect via edge connectors on the backplane. The board provides the physical alignment and electrical pathways for the Multibus signals used throughout the rack.
FAQ
What is the Reliance 0-57510?
The Reliance 0-57510 is a 10-slot backplane for the AutoMax control system.
Which system does the 0-57510 belong to?
It is designed for the Reliance Electric AutoMax series and is used in 10-slot AutoMax rack assemblies.
What does the 0-57510 do?
It provides the mechanical mounting and Multibus electrical interconnect for up to 10 AutoMax modules within a rack chassis.
Is the 0-57510 a complete rack?
No. It is the backplane board that forms the interconnect structure inside a 10-slot AutoMax rack assembly.
Which modules can be installed on the 0-57510?
It supports standard AutoMax modules including processors, digital and analog I/O, drive controllers, memory modules, and power supplies, subject to AutoMax slot placement rules.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626