Description
Core Product Summary (Brand / Model / Key Attributes)
The Reliance Electric 0-57400-A is a rack-mounted system power supply module engineered for deployment within Reliance Electric AutoMax distributed control and automation platforms. Functioning as the primary DC power distribution source for an AutoMax card-file chassis, it converts incoming facility power into regulated low-voltage DC rails required across the rack backplane to energize processor, communication, and I/O modules.
Constructed as a modular plug-in unit with an integrated front faceplate, diagnostic status indicators, and rear backplane connectors, the 0-57400-A (representing revision -A of the 0-57400 power supply assembly) mounts directly into the dedicated power supply slot of a compatible Reliance AutoMax rack. Maintenance and procurement personnel verify both the 0-57400 base order number and the -A revision suffix to maintain power capacity and backplane compatibility when servicing existing control cabinets.
Key Technical Specifications
| Parameter | Verified Specification |
| Manufacturer / Brand | Reliance Electric (Rockwell Automation / Reliance Automation) |
| Model / Order Number | 0-57400-A (base part number 0-57400, revision suffix -A) |
| Product Type | Rack-Mounted System Power Supply Module |
| System Compatibility | Reliance Electric AutoMax Distributed Control / Automation Platform |
| Mounting Type | Dedicated power supply slot in AutoMax chassis backplane |
| Indicators | Front-panel power status LEDs |
Detailed Product Overview
In a Reliance Electric AutoMax distributed control rack, all plug-in processor cards, network interface modules, and local I/O boards draw regulated operating voltages directly from the chassis backplane. The Reliance Electric 0-57400-A serves as the dedicated rack power supply module responsible for conditioning incoming supply power and delivering stable DC bus voltages across the backplane to support continuous control operation.
Because AutoMax chassis configurations vary in slot count and module power draw, matching the exact power supply model (0-57400) and revision suffix (-A) is critical during replacement. The module installs into the designated power supply position of the AutoMax rack, engaging the backplane power connectors while presenting line connections, protective fusing, and status indicators on the front assembly.
Engineering Selection Highlights
- Exact Base & Revision Match (
0-57400-A): Identified by base number0-57400with revision suffix-A→ Confirm the exact model and revision letter stamped on the existing power supply faceplate before ordering to ensure electrical and mechanical compatibility with the host chassis. - Reliance AutoMax Chassis Fit: Built specifically for the dedicated power supply slot of compatible Reliance AutoMax racks → Verify rack model and backplane slot layout before installation, as power supply modules are keyed/positioned separately from standard I/O or processor slots.
- Backplane Load Capacity Consideration: Supplies regulated DC power across all installed modules in the local rack → Confirm that total backplane current draw from installed processor and I/O cards remains within the rating specified in your AutoMax rack hardware documentation.

0-57400-A

0-57400-A
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
| Control System Platform | Reliance Electric AutoMax Control Architecture | Designed for native installation in compatible Reliance AutoMax card-file racks. |
| Chassis Mounting Position | Dedicated AutoMax rack power supply slot | Installs into the designated power supply bay rather than standard logic/I/O card slots. |
| Hardware Revision Level | Revision -A (0-57400-A) |
Match the exact revision suffix when replacing power supplies in active system racks. |
Dimensions, Mounting & Connection Notes
- Form Factor: Modular rack-mounted power supply assembly with a front faceplate designed for insertion into the power supply slot of a Reliance Electric AutoMax chassis.
- Electrical Safety & Isolation: Line-voltage input terminals and internal energy-storage capacitors are present on power supply modules. Disconnect and lock out upstream facility power, verify zero voltage with a calibrated meter, and allow internal capacitors to discharge before removing or installing the unit.
- Handling Precautions: Observe standard electrostatic discharge (ESD) precautions when handling the assembly outside the chassis, and inspect rear backplane connectors for cleanliness and pin alignment before seating.
FAQ
What is the Reliance Electric 0-57400-A? The Reliance Electric 0-57400-A is a rack-mounted system power supply module manufactured by Reliance Electric for AutoMax industrial automation systems.
Which control system platform uses the 0-57400-A module? It is engineered for deployment in Reliance Electric AutoMax modular rack-based distributed control and drive-control architectures.
What does the -A suffix on 0-57400-A indicate? The -A suffix identifies the specific hardware revision level of the 0-57400 power supply assembly; matching this revision ensures mechanical and electrical compatibility with the host rack.
Verification & Troubleshooting Notes
- Front-Panel Power LED Check: Upon energizing the rack, inspect the front-panel power indicator LEDs to verify that incoming power is present and regulated DC outputs are active.
- Input Supply & Fuse Verification: If the rack fails to power up, isolate upstream power according to site lockout/tagout procedures and verify incoming line voltage at the input terminals as well as the condition of any accessible input fuses.
- Backplane Seating Inspection: Ensure the power supply module is fully seated and mechanically secured to the chassis so the rear backplane power connectors make complete contact.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626