Description
Core Product Summary
The Reliance Electric 0-60028-2 is a gate driver interface module for Reliance Electric AutoMax drive systems. It is associated with fiber-optic IGBT gate-drive circuitry and provides the interface function between drive-control circuitry and IGBT gate-drive signals.
The module is identified by the base number 0-60028 and the -2 revision suffix. Its role is in the drive-power electronics interface layer rather than in field I/O, network communication, or motor-speed control. The complete order number should be matched when replacing or documenting a module in an existing AutoMax drive installation.
Key Technical Specifications
| Item | Specification |
|---|---|
| Manufacturer | Reliance Electric |
| Exact model / order number | 0-60028-2 |
| Base product number | 0-60028 |
| Revision identifier | -2 |
| Product type | Gate driver interface module |
| System family | Reliance Electric AutoMax drive systems |
| Drive interface function | Fiber-optic IGBT gate-drive interface |
| Primary role | Interfaces drive-control circuitry with IGBT gate-drive signals |
| Associated board reference | 802284-159B |
| Catalog reference | PM1020 |
Engineering Selection Highlights
- The exact order number is 0-60028-2; the -2 suffix identifies the applicable revision of the 0-60028 gate driver interface module family.
- The module belongs to the Reliance Electric AutoMax drive-system environment, so the installed drive architecture determines system fit.
- Its fiber-optic IGBT gate-drive interface makes it relevant where drive-control signals must be isolated and routed to IGBT gate-drive circuitry.
- The module performs a gate-driver interface function rather than supplying main drive power or processing field-device signals.
- The board reference 802284-159B and catalog reference PM1020 provide additional identification points for procurement and documentation.
- The complete part number should be used when matching a replacement module to the installed AutoMax drive configuration.

0-60028-2

0-60028-2
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Drive-system family | Reliance Electric AutoMax drive systems | The module is intended for use within the AutoMax drive architecture. |
| Module family | 0-60028 gate driver interface module | The base number identifies the gate-driver interface module family. |
| Hardware revision | -2 | Match the complete suffix when replacing or documenting the installed module. |
| Drive interface | Fiber-optic IGBT gate-drive interface | The module provides the interface for fiber-optic IGBT gate-drive signals. |
| Board reference | 802284-159B | Use the board reference as an additional identification check where available. |
Dimensions, Mounting & Connection Notes
The 0-60028-2 is a drive gate driver interface module for the AutoMax drive-system environment. It is installed as part of the drive electronics assembly and interfaces with fiber-optic IGBT gate-drive circuitry.
Specific dimensions, fiber-optic connector types, terminal assignments, wiring requirements, torque values, and clearance requirements are not included here because they must be taken from the applicable drive-system documentation and the exact installed hardware configuration.
Detailed Product Overview
The Reliance Electric 0-60028-2 is a gate driver interface module associated with AutoMax drive systems. Its base identifier, 0-60028, identifies the gate-driver interface module family, while the -2 suffix identifies the specific hardware revision. This complete identifier is important because drive-system modules may include multiple revision variants.
The module’s engineering purpose is to provide the interface for fiber-optic IGBT gate-drive signals. In a drive system, IGBT gate-drive circuitry requires controlled switching signals from the drive-control section. The 0-60028-2 provides the interface function that supports this signal path, using fiber-optic technology as part of the gate-drive interface arrangement.
The module is therefore part of the drive-power electronics interface layer. It does not perform motor-speed control, field I/O conversion, or network communication. Its relevance is in the path between drive-control logic and the IGBT gate-drive circuitry that switches power within the drive system.
For procurement and maintenance, the complete part number 0-60028-2 should be used as the primary identification reference. The board reference 802284-159B and catalog reference PM1020 provide additional identification points that can help confirm the module in documentation or inventory records. Before replacing the module, the installed AutoMax drive configuration should be reviewed to ensure that the replacement matches the required gate-driver interface function and revision.
Applications & System Role
Within a Reliance Electric AutoMax drive architecture, the 0-60028-2 occupies the gate-drive interface layer. Its role is to provide the connection between drive-control circuitry and the fiber-optic IGBT gate-drive signals used in the drive’s power-electronics section.
This makes the module relevant to drive systems where IGBT switching devices require isolated gate-drive signaling. Rather than controlling motor speed directly or handling field I/O, the module supports the interface function that allows control-level commands to reach the IGBT gate-drive circuitry.
FAQ
What is the Reliance Electric 0-60028-2?
It is a gate driver interface module for Reliance Electric AutoMax drive systems.
Which product family does the 0-60028-2 belong to?
It belongs to the Reliance Electric 0-60028 gate driver interface module family.
What does the -2 suffix indicate?
The -2 suffix identifies the specific hardware revision of the 0-60028 module.
What is the module’s primary function?
It provides the interface for fiber-optic IGBT gate-drive signals in an AutoMax drive system.
Is this a power-supply module?
No. It is a gate driver interface module, not a main drive power-supply module.
Is this module suitable for field I/O applications?
No. Its role is in the drive-power electronics interface layer, specifically for IGBT gate-drive signaling.
What should be checked before replacing this module?
The complete part number, including the -2 revision suffix, should be matched against the installed module, along with the AutoMax drive-system configuration.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626