Sale!

Schneider Modicon PC-E984-685 984 Series PLC CPU

  • Model: PC-E984-685 (Modicon 685E CPU)
  • Brand: Schneider Electric (Modicon)
  • Series: Modicon 984 Series PLC Architecture
  • Core Function: High-performance central processing and logic execution for legacy industrial control systems
  • Product Type: Programmable Logic Controller (PLC) CPU Module
  • Key Specs: 16K User Memory | 10K Data Memory | 2 x Modbus Ports | 1 x Modbus Plus Port
  • Condition: New Original / New Surplus (Never refurbished).
  • Inventory Status: Legacy EOL control platform asset requiring strategic surplus stocking to prevent plant-wide controller downtime.
Categories: , , , , SKU: PC-E984-685 Brand:

Description

Key Technical Specifications

Parameter Value
Processor Architecture Modicon 984 Series High-Performance CPU
User Memory Capacity 16K words
Data Memory Capacity 10K words
Communication Ports 2 x Modbus RS-232/RS-485 ports, 1 x Modbus Plus high-speed peer port
Input Power Requirements 115/230 VAC (50/60 Hz) or 24 VDC variants
Operating Temperature 0 to +60 °C
Mounting Type Slot-mount into Modicon 984 main chassis/backplane rack
Enclosure Integration Standard industrial control rack modular housing
Weight ~2.06 kg

 

Product Introduction & Supply Chain Strategy

The Schneider Electric Modicon PC-E984-685 (commonly known as the 685E CPU) is a robust programmable logic controller processor designed for large-scale discrete and continuous process control applications. It handles intensive ladder logic execution, register data management, and multi-drop network coordination across legacy industrial installations.

Maintaining this processor as a certified New Surplus spare is a critical asset protection strategy for brownfield facilities. Sourcing factory-fresh, uninstalled hardware eliminates the high latent failure rates associated with refurbished or repaired electronic boards, protecting Total Cost of Ownership (TCO) and ensuring uninterrupted plant operations without expensive system migration overhead.

PC-E984-685

PC-E984-685

Installation & Configuration Guide

1.Pre-Installation (Prep & Safety):Prerequisite.

Isolate main power distribution to the Modicon 984 rack assembly and apply strict lock-out/tag-out (LOTO) protocols. Wear a grounded ESD wrist strap before touching backplane components. Save and back up current application logic via programming software before unseating hardware.

Verification: Confirm zero voltage across rack power terminals using a calibrated digital multimeter.

2.Removal:Mechanical Extraction.

Disconnect all Modbus serial cables, Modbus Plus trunk connectors, and front-panel wiring harnesses. Release the upper and bottom chassis retaining screws, and pull the legacy PC-E984-685 module straight out of the backplane slot.

Verification: Inspect the backplane connector pins for dust buildup, oxidation, or bent contact pins.

3.Installation (Clone & Seat):Hardware Setup.

Verify that any onboard configuration switches or memory cartridge options on the new Schneider PC-E984-685 module match your legacy system settings. Align the card with the rack guide slots and push firmly until the rear connector seats completely into the backplane bus. Tighten security screws.

Verification: Visually check that the module is flush with the rack frame and that all communication plugs lock securely into place.

4.Power-On & Testing:Commissioning.

Restore rack power supplies. Monitor the front-panel indicator LEDs (Run, Batt, Comm) to verify a successful self-diagnostic boot sequence without memory or watchdog fault trips.

Verification: Connect via the programming terminal to verify program integrity, register values, and active communication status across all Modbus and Modbus Plus channels.

 

Firmware/Software Versions & Upgrade Notes

  • Programming Baseline: Ensure your programming environment (such as Modsoft or ProWorx NXT) matches the ladder logic memory configuration and firmware generation of the 685E CPU.
  • Compatibility Warnings: Do not hot-swap legacy 984 CPU modules while the mainframe rack power is active, as backplane voltage surges can corrupt register data or damage I/O bus transceivers.
  • Battery Maintenance: Check the internal memory backup lithium battery status during installation to ensure program retention during unpowered states.

 

Frequently Asked Questions (FAQ)

  • Why is this Schneider PC-E984-685 classified as New Surplus rather than standard factory direct?

    This unit is an authentic, original OEM-manufactured Modicon controller procured from verified surplus channels after inventory rationalizations. It has never been installed in an active rack or subjected to industrial operational wear.

  • How can I verify this PLC processor is not refurbished or repaired?

    We enforce a strict zero-tolerance policy against second-hand, repaired, or rebuilt parts. Each unit arrives in original packaging featuring pristine gold-plated connector fingers, unblemished enclosures, and zero component replacement history.

  • What are the hidden risks of utilizing refurbished legacy CPU modules?

    Refurbished controllers frequently suffer from dried-out electrolytic capacitors, heat-stressed microprocessors, and fatigued solder joints. These hidden flaws cause random watchdog faults, memory corruption, and catastrophic production stoppages.

  • Does the PC-E984-685 support Modbus Plus peer-to-peer networking?

    Yes, it features an integrated Modbus Plus port alongside dual standard Modbus communication ports for high-speed industrial network integration.

  • What warranty terms apply to this New Surplus processor?

    This product is backed by a comprehensive 1-year replacement warranty, matching standard OEM reliability benchmarks and protecting your facility’s operational capital investment.