Description
Core Product Summary
The Schneider Electric XBTF011310 is a Magelis XBT-F graphic operator terminal for machine and process supervision. It combines a 5.7 in. monochrome LCD display with an integrated membrane keypad, allowing operators to view process data, acknowledge alarms, enter setpoints, and navigate application pages.
The terminal operates from 24 VDC, provides serial communication for PLC connection, and uses an 8 MB PCMCIA Type II application memory card. Its front panel is rated IP65 and UL Type 4, while the terminal is flush-mounted using supplied spring clips. The XBTF011310 supports dynamic process visualization, alarm handling, recipe and help pages, real-time curves, and operator access through password levels.
Key Technical Specifications
| Category | Specification |
|---|---|
| Product type | Graphic operator terminal |
| Product family | Modicon Magelis XBT-F |
| Display | 5.7 in. monochrome LCD |
| Operator input | Integrated membrane keypad |
| Supply voltage | 24 VDC |
| Permissible voltage range | 18–30 VDC, maximum 5% ripple, maximum 1 ms microbreaks |
| Power consumption | 35 W |
| Protection | Polarity-inversion and overload protection |
| Application memory | 8 MB PCMCIA Type II card supplied; 8 MB or 16 MB supported |
| Dynamic RAM | 2.5 MB |
| Application pages | Up to 50–450 application, alarm, help, form, and recipe pages, depending on memory card |
| Curves | 16 real-time curves |
| Real-time clock | Access to PLC real-time clock |
| Alarm relay | 1 volt-free normally open contact, maximum 0.5 A at 24 VDC/VAC |
| Front-panel protection | IP65, NEMA Type 4, UL Type 4 |
| Rear-panel protection | IP20 |
| Mounting | Flush-mounted with supplied spring clips |
| Signaling | 1 communication LED, 1 keypad-activity LED, and 11 service/alphanumeric-key LEDs |
| Operating system | MAGELiS |
Engineering Selection Highlights
- The XBTF011310 is a keypad-operated Magelis terminal, so it suits applications where tactile function-key operation is required rather than touch operation.
- Its 5.7 in. monochrome display provides process visualization for machine status, alarms, measurements, and operator prompts.
- The 24 VDC supply accepts 18–30 VDC with limited ripple and microbreak duration, so the control-panel power supply must remain within these limits.
- The supplied 8 MB PCMCIA Type II card stores the dialogue application; a 16 MB card can be used where the application requires additional capacity.
- Serial communication connects the terminal to the associated PLC, while the application protocol is supported through the PCMCIA application memory card.
- The IP65 / NEMA Type 4 / UL Type 4 front panel is intended for panel-mounted installations where the front face requires protection against dust and water ingress.
- The alarm relay provides a hardware alarm signal at up to 0.5 A, 24 VDC/VAC.

XBTF011310

XBTF011310
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Product family | Schneider Electric Modicon Magelis XBT-F | The terminal belongs to the Magelis graphic operator-terminal range. |
| PLC connection | Serial communication interface | The terminal communicates with the associated PLC through its serial connection. |
| Application memory | PCMCIA Type II card required | An 8 MB card is supplied; 8 MB or 16 MB cards are supported. |
| Application software | MAGELiS operating environment | The dialogue application is developed and loaded for the Magelis terminal. |
| Power supply | 24 VDC, 18–30 VDC permissible range | Maintain ripple at 5% or less and microbreaks at 1 ms or less. |
| Panel mounting | Flush-mounted with supplied spring clips | Install in the specified panel cutout and secure with the supplied clips. |
| Alarm signaling | One volt-free N.O. relay contact | Maximum contact rating is 0.5 A at 24 VDC/VAC. |
| Real-time clock | Uses the PLC real-time clock | Time display and time-dependent functions rely on the connected PLC clock. |
Dimensions, Mounting & Connection Notes
| Item | Verified data |
|---|---|
| Display size | 5.7 in. monochrome LCD |
| Mounting method | Flush-mounted, fixed with supplied spring clips |
| Front-panel protection | IP65, NEMA Type 4, UL Type 4 |
| Rear-panel protection | IP20 |
| Supply voltage | 24 VDC nominal; 18–30 VDC permissible |
| Power consumption | 35 W maximum |
| Application memory | PCMCIA Type II slot; 8 MB card supplied |
| Communication | Serial interface for PLC connection |
| Alarm relay | 1 volt-free N.O. contact, maximum 0.5 A at 24 VDC/VAC |
| Operator feedback | Communication LED, keypad-activity LED, and 11 service/alphanumeric-key LEDs |
Detailed Product Overview
The Schneider Electric XBTF011310 is a Magelis XBT-F graphic operator terminal designed for local machine supervision and control. It provides a 5.7 in. monochrome LCD and an integrated membrane keypad, giving operators a fixed physical interface for viewing process information and entering commands.
The terminal operates from a 24 VDC supply. The permissible input range is 18–30 VDC, with a maximum ripple of 5% and maximum microbreaks of 1 ms. The terminal includes protection against polarity inversion and overload, and its documented maximum power consumption is 35 W.
Application programs are stored on a PCMCIA Type II memory card. The XBTF011310 is supplied with an 8 MB card, and the terminal supports either 8 MB or 16 MB application memory cards. Depending on the memory card used, the terminal can accommodate 50–450 application, alarm, help, form, and recipe pages. It also supports 16 real-time curves.
The operator interface supports dynamic process visualization, numeric and alphanumeric variable modification, alarm handling, recipe management, and help-page display. It provides a service line for status and alarm information, access to the PLC real-time clock, and three password levels. Function keys can be assigned in the MAGELiS application environment and associated with internal PLC bits.
For communication, the terminal provides a serial interface for connection to the PLC. The communication protocol application is supported through the PCMCIA Type II application memory card. A communication LED indicates communication status, while a keypad-activity LED and 11 service and alphanumeric-key LEDs provide operator feedback.
The front panel is rated IP65, NEMA Type 4, and UL Type 4. The rear panel is rated IP20. The terminal is flush-mounted using supplied spring clips. An integrated volt-free normally open alarm relay provides a hardware alarm output rated at up to 0.5 A at 24 VDC/VAC.
Applications & System Role
The XBTF011310 serves as the operator-interface layer between a machine operator and the connected PLC. It displays process values, alarms, maintenance messages, recipes, and diagnostic information, while the membrane keypad provides operator commands, numeric entries, and page navigation.
Its application functions include dynamic visualization of operating data, analog-variable scaling, real-time curves, alarm logs and alarm groups, help pages, form pages, recipe pages, and password-controlled access. The terminal can display pages called by the operator or by the PLC, making it suitable for machine control stations that require structured operator interaction.
Typical fit scenarios are panel-mounted machine HMI positions where a compact monochrome graphic display, physical keypad, serial PLC communication, and alarm relay are required.
FAQ
What is the Schneider XBTF011310?
The Schneider XBTF011310 is a Magelis XBT-F 5.7 in. monochrome graphic operator terminal with an integrated membrane keypad for PLC-connected machine supervision.
What display does the XBTF011310 use?
It uses a 5.7 in. monochrome LCD display.
What power supply does the XBTF011310 require?
It requires 24 VDC, with a permissible range of 18–30 VDC, maximum 5% ripple, and maximum 1 ms microbreaks.
How is the application stored on the XBTF011310?
The dialogue application is stored on a PCMCIA Type II memory card. An 8 MB card is supplied, and 8 MB or 16 MB cards are supported.
What protection rating does the XBTF011310 have?
The front panel is rated IP65, NEMA Type 4, and UL Type 4. The rear panel is rated IP20.
How is the XBTF011310 mounted?
The terminal is flush-mounted in a panel cutout and secured with supplied spring clips.
Does the XBTF011310 include an alarm output?
Yes. It includes one volt-free normally open alarm relay contact rated at up to 0.5 A at 24 VDC/VAC.
What operator functions does the XBTF011310 support?
It supports process visualization, setpoint entry, alarm handling, recipe and help pages, real-time curves, password access, and pages called by the operator or PLC.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626