Description
Key Technical Specifications
| Parameter | Value |
| Manufacturer | SEM / Servo Dynamics |
| Model Number | MTS30M4-38 |
| Motor Type | Permanent Magnet DC Brush Servo |
| Rated Voltage | 140 V DC |
| Maximum Speed | 3,700 RPM |
| Stall Torque | Approx. 29 lb-in |
| Feedback Device | Integrated 1000-line encoder |
| Flange Type | A1-B (SD55) Square Flange |
| Electrical Connection | Flying leads |
| Operating Temperature | 0 to +40 °C |
Product Introduction & Supply Chain Strategy
The SEM (Servo Dynamics) MTS30M4-38 is a robust permanent magnet DC brush servo motor designed for high-response industrial automation, legacy CNC machine tools, and precision positioning axes. It combines a high-energy ferrite magnet structure with a low-inertia armature to deliver smooth low-speed operation, rapid acceleration profiles, and precise feedback tracking via its built-in optical encoder.
Sourcing this mature motor architecture as a New Surplus asset optimizes your TCO while eliminating the severe vulnerabilities associated with overhauled or used brush motors. Legacy DC motors found on the secondary market frequently suffer from commutator wear, carbon dust buildup, and degraded brush-box springs. Deploying a factory-sealed, unused surplus unit guarantees zero mechanical wear on the commutator bars, full insulation integrity, and maximum operational uptime for critical legacy production lines.

MTS30M4-38

MTS30M4-38
Installation & Configuration Guide
Stage 1: Pre-Installation (Prep & Safety)
- Apply rigorous lock-out/tag-out (LOTO) procedures on the servo drive amplifier and main AC supply disconnects.
- Put on an ESD-safe grounded wrist strap and ensure proper grounding protocols are observed before handling encoder wiring.
- Document existing mechanical alignment marks, coupling positions, and flying lead color-coding designations.
Stage 2: Removal
- Disconnect power leads and encoder connector plugs carefully from the terminal junctions, avoiding undue strain on cable entry points.
- Unbolt the mounting flange bolts evenly in a diagonal pattern to prevent binding the pilot diameter.
- Extract the motor straight back from the mechanical gearbox, ball screw, or pulley interface to protect the drive shaft from scoring.
Stage 3: Installation (Clone & Seat)
- Inspect the mating mechanical pilot and shaft coupling for burrs, runout, or contamination.
- Align the MTS30M4-38 flange with the mounting interface, ensuring smooth pilot engagement, and torque mounting bolts securely.
- Connect the armature flying leads (observing proper polarity for correct rotational direction) and plug in the 1000-line encoder harness.
Stage 4: Power-On & Testing
- Verify insulation resistance between power leads and frame ground before applying DC bus power.
- Release LOTO and enable the drive controller in a low-current, restricted-velocity test mode.
- Verify proper motor rotation direction, check encoder feedback counting in the controller software, and run a low-speed tuning pass before releasing the axis to production.
Firmware/Software Versions & Upgrade Notes
- Configuration Baseline: Brushed DC motors like the MTS30M4-38 do not utilize onboard firmware, but rely entirely on drive-side current limits and PID loop tuning loops.
- Compatibility Notes: Ensure the servo amplifier current limits match the continuous and peak rating of the MTS30 motor armature to prevent thermal overload or brush sparking.
- Replacement Strategy: When swapping this unit, keep encoder line counts identical (1000-line) to prevent scaling errors in the motion controller position registers. Avoid substituting with an unverified winding variant to maintain back-EMF constants.
Frequently Asked Questions (FAQ)
Are these units genuinely new, or are they refurbished?
This unit is a Brand New Surplus motor. It is entirely unused, preserved in original factory storage conditions, and has never been installed in a machine tool or subjected to third-party brush re-machining or rewinding.
Why choose New Surplus over a repaired or used DC servo motor?
Used DC motors often feature deeply grooved commutators, carbon-fouled brush assemblies, and thermally degraded armature windings. Procuring a New Surplus unit bypasses hidden wear factors, delivering factory-fresh operational hours and consistent torque output.
What maintenance do the brushes require on the MTS30M4-38?
As a brushed DC motor, periodic inspection of the carbon brushes and commutator surface is recommended during scheduled plant maintenance windows to ensure optimal electrical contact.
Can this motor directly replace older SEM models?
Yes, provided the flange type (A1-B / SD55), voltage rating (140 V DC), and encoder resolution match your legacy mechanical and control specifications. Always cross-reference the complete suffix string.
What warranty is provided with this unit?
This New Surplus unit is backed by a comprehensive 1-year operational warranty, ensuring absolute reliability and risk-free integration into your legacy motion control architecture.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626