Description
Core Product Summary (Brand / Model / Key Attributes)
The Siemens TGX-760E11AAAGNND6 (also designated under order code TGX:760E11AAAGNND6) is a high-performance electro-pneumatic valve positioner engineered within the Siemens / Moore Series 760 family. Designed for precise valve motion control, this unit converts a standard 4 to 20 mA DC electrical control signal into a proportional pneumatic output to accurately position single-acting or double-acting pneumatic actuators.
Featuring a standard flow capacity configuration and designed for stroke lengths ranging from 1/2 to 4 inches (or equivalent rotary travel), the TGX-760E11AAAGNND6 integrates local pressure gauges for real-time monitoring of supply and output air lines. The unit is housed in a rugged, epoxy-coated aluminum NEMA 4X enclosure rated IP65, providing superior resistance to outdoor weathering, chemical exposure, and mechanical vibration. Certified for hazardous area operations, it serves as a critical interface for process control valves across chemical processing, power generation, oil and gas, and water treatment operations.
Key Technical Specifications
| Specification Parameter | Technical Value / Standard |
| Manufacturer | Siemens (formerly Moore Products Co.) |
| Model / Part Number | TGX-760E11AAAGNND6 / TGX:760E11AAAGNND6 |
| Product Category | Electro-Pneumatic Valve Positioner |
| Series / Family | Series 760 (Model 760E) |
| Input Signal Range | 4 to 20 mA DC |
| Input Impedance | Approx. 180–200 Ohms nominal |
| Output / Supply Pressure Range | Up to 120 psig (8.3 bar) maximum pneumatic supply |
| Applicable Stroke / Travel Range | 1/2 in. to 4 in. (12.7 mm to 101.6 mm) linear; up to 90° rotary |
| Flow Capacity | Standard Flow Capacity |
| Pneumatic Connections | 1/4″ NPT female ports |
| Electrical Conduit Ports | 3/4″ NPT female |
| Local Gauges | Included (Supply & Output Pressure Gauges) |
| Feedback Options / Limit Switches | No internal switches / No position feedback transmitter (No options installed) |
| Enclosure Rating | NEMA 4X / IP65, Cast Aluminum with Epoxy Coating |
| Operating Temperature Range | -40°F to +167°F (-40°C to +75°C) |
| Hazardous Area Approvals | FM / CSA / ATEX / CE certified for Intrinsically Safe & Non-Incendive locations |
Detailed Product Overview
The Siemens TGX-760E11AAAGNND6 electro-pneumatic positioner provides stable dynamic response and high positioning accuracy for final control elements in automated process loops. By accepting an analog 4–20 mA current signal directly from a Distributed Control System (DCS), Programmable Logic Controller (PLC), or single-loop controller, the positioner eliminates the need for an external I/P transducer.
Built around a force-balance electro-pneumatic converter and a high-gain pneumatic spool valve, the 760E continuously compares the commanded electrical input with the actual valve stem position returned via a mechanical feedback cam. Any deviation causes an immediate adjustment in output air pressure to the actuator, restoring precise mechanical alignment. The universal cam design accommodates linear, equal-percentage, and quick-opening flow characteristics directly in the field without requiring extra components.
Designed for long service life in harsh environments, the die-cast aluminum enclosure with protective epoxy coating resists atmospheric corrosion and industrial washdown conditions. Integrated air supply and output pressure gauges provide technicians with clear, immediate visual diagnostics during routine field loops and commissioning calibrations.

TGX-760E11AAAGNND6

TGX-760E11AAAGNND6
Engineering Selection Highlights
- Direct 4–20 mA Interface: Eliminates intermediate I/P conversion modules, reducing panel hardware and signal loop complexity.
- Universal Motion Adaptation: Supports both linear stroke (1/2″ to 4″) actuators and quarter-turn rotary valve configurations via interchangeable feedback cams.
- Integrated Visual Diagnostics: Factory-installed pressure gauges allow rapid verification of pneumatic supply pressure and output loading without breaking air lines.
- Harsh Environment Protection: NEMA 4X enclosure shielding guards interior pneumatic pilots and I/P components against moisture, corrosive vapors, and dust.
- Wide Thermal Limits: Operates continuously between -40°C and +75°C, ensuring reliable performance in unconditioned outdoor field environments.
System Compatibility & Integration Requirements
| Component / System | Compatibility / Requirement | Practical Note |
| Control Signal Source | 4 to 20 mA DC analog output card | Loop power driver must overcome total loop impedance (approx. 200 Ω). |
| Pneumatic Actuators | Linear or Rotary, Single-acting or Double-acting | Flexible mounting kits support diaphragm and piston actuators. |
| Air Supply Quality | Instrument-grade air compliant with ISA S7.0.01 | Requires clean, dry, oil-free air filtered to 5 microns or better. |
| Pneumatic Piping | 1/4″ NPT stainless steel or copper tubing | Use proper thread sealant (avoid tape on initial threads) to prevent pilot port blockage. |
| Conduit & Wiring | 3/4″ NPT explosion-proof cable gland or conduit connection | Mandatory seal fittings required in hazardous location installations. |
Dimensions, Mounting & Connection Notes
- Enclosure Form Factor: Compact die-cast aluminum body with removable cover for internal calibration adjustments.
- Mounting Configuration: Mounts directly to valve actuators using standard NAMUR rotary brackets or custom linear mounting yoke kits.
- Pneumatic Connections: Standard 1/4″ NPT female ports for Supply Air, Output 1, and Output 2.
- Electrical Wiring: Dual 3/4″ NPT conduit entries allow separate routing for 4–20 mA control leads and optional secondary conduit connections.
- Air Supply Cleanliness: Upstream air filter-regulator (such as a 5-micron filter unit) is required to ensure long-term stability of the pilot valve assembly.
FAQ
What is the input signal for the Siemens TGX-760E11AAAGNND6?
It operates on a standard 4 to 20 mA DC control signal supplied by a PLC or DCS analog output module.
Does the TGX-760E11AAAGNND6 include pressure gauges?
Yes, this model variant includes factory-installed pressure gauges to monitor air supply pressure and actuator output pressure.
Can the TGX-760E11AAAGNND6 be used on rotary valves?
Yes. The Series 760 positioner features a universal feedback mechanism that supports both linear stroke valves (1/2 to 4 inches) and 90-degree rotary actuators.
Does this specific model feature internal limit switches or position feedback?
No. The “NND6” suffix in this model code indicates that no internal limit switches or auxiliary 4–20 mA position feedback transmitters are installed.
What enclosure protection rating does the TGX-760E11AAAGNND6 offer?
It features an epoxy-coated aluminum housing rated for NEMA 4X and IP65 environmental protection.
Verification & Troubleshooting Notes
- Zero and Span Calibration: If valve positioning drifts, remove the enclosure cover to access the zero screw adjustment and span lever; calibrate using a precision 4–20 mA signal generator while monitoring valve stem travel.
- Air Supply Pressure Verification: Check local supply pressure gauge to ensure supply air pressure exceeds maximum required actuator bench range by at least 5 to 10 psi, without exceeding the 120 psig maximum rating.
- Pilot Orifice Cleaning: If positioner response becomes sluggish or fails to respond to small signal shifts, inspect and clean the internal pneumatic pilot restrictor screen using dry instrument air.
- Cam Alignment Check: Verify that the internal feedback cam is correctly oriented for the actuator’s motion profile (linear, equal-percentage, or quick-opening) and properly tightened to avoid mechanical hysteresis.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626