Sale!

Square D KAL36150J 150A 3-Pole 600V Circuit Breaker

  • Model: KAL36150J
  • Brand: Square D / Schneider Electric
  • Series: KAL K-Frame
  • Core Function: Overcurrent and short-circuit protection
  • Product Type: Molded case circuit breaker
  • Key Specs: 150 A; 3-pole; 600 V AC
  • Trip Type: Thermal-magnetic
  • Interrupting Rating: 25 kA at 480 V AC
  • Mounting: Verify exact mounting configuration from the breaker nameplate and panel requirements
  • Condition: Specify New Original, New Surplus, or Refurbished/Tested when ordering
Categories: , , , , SKU: KAL36150J Brand:

Description

Key Technical Specifications

Parameter Value
Manufacturer Square D / Schneider Electric
Model KAL36150J
Product Type Molded case circuit breaker
Frame K-Frame
Poles 3
Current Rating 150 A
Maximum AC Voltage 600 V AC
Maximum DC Voltage 250 V DC
Trip Unit Thermal-magnetic
Trip Functions Long-time and instantaneous
AC Magnetic Trip Setting 750–1,500 A
Interrupting Rating 25 kA at 480 V AC
Interrupting Rating 22 kA at 600 V AC
Interrupting Rating 42 kA at 240 V AC
Frequency 50/60 Hz
Dimensions 4.50 in W × 4.75 in D × 8.00 in H
Weight Approximately 7 lb
Standards UL Listed, CSA Certified, IEC Rated
HACR Yes

The underlying Schneider Electric data sheet identifies KAL36150 as a 150 A, 3-pole, 600 V AC K-Frame thermal-magnetic breaker with 25 kA interrupting capacity at 480 V AC.

Important model-number note: Public sources clearly document KAL36150, while KAL36150J appears in industrial-parts inventories as a specific suffix variant. The exact meaning of the J suffix is not established by the Schneider data sheet I found, so it should not be treated as an independently verified mounting specification. One third-party source claims I-Line compatibility, but that conflicts with the standard KAL36150 documentation identifying the KAL configuration as unit-mounted. Verify the physical breaker and panel configuration before replacement.

 

Product Introduction

The Square D KAL36150J is a 3-pole, 150 A molded case circuit breaker from the K-Frame family. The documented KAL36150 configuration provides thermal-magnetic protection against sustained overloads and short-circuit conditions in low-voltage industrial distribution equipment. It is rated up to 600 V AC and 250 V DC.

The breaker uses long-time thermal protection with an adjustable instantaneous magnetic trip range of 750–1,500 A. The standard KAL36150 is a unit-mounted breaker with line- and load-side lug connections. Do not substitute an I-Line KA breaker merely because the current, voltage, and pole count match; the mounting configuration is different.

KAL36150J

KAL36150J

KAL36150J

KAL36150J

Installation & Configuration Guide

Stage 1: Pre-Installation Preparation — 10 Minutes

⚠️ Safety First: This is a high-energy switching device. De-energize the panel, apply site-approved lockout/tagout procedures, and verify absence of voltage with an appropriately rated meter before touching the breaker or conductors.

Tools Required:

  • CAT-rated digital multimeter
  • Insulated screwdriver/torque tools
  • ESD protection where appropriate
  • Wire labels
  • Smartphone or camera for documentation
  • Manufacturer-specified torque tool

Data Backup:

  1. Record the existing breaker catalog number and nameplate information.
  2. Photograph the breaker, terminals, mounting arrangement, and surrounding panel.
  3. Record the existing conductor sizes and terminal arrangement.
  4. Verify the system voltage and available fault current.
  5. Confirm that the replacement’s interrupting rating is adequate for the installation.
  6. Verify the exact suffix: KAL36150J, not simply another 150 A K-Frame breaker.

Stage 2: Removing the Old Breaker — 10 Minutes

  1. Notify affected operations and loads.
  2. Shut down the associated equipment using the approved operating procedure.
  3. Open the upstream disconnect.
  4. Apply lockout/tagout.
  5. Test for absence of voltage phase-to-phase and phase-to-ground.
  6. Photograph all connections before removal.
  7. Label conductors if their identification is not already clear.
  8. Loosen terminal connections using the appropriate tool.
  9. Remove the conductors without damaging insulation or terminal hardware.
  10. Release the breaker from its mounting arrangement.
  11. Inspect the enclosure and connection points for overheating, arcing, corrosion, or damaged insulation.

⚠️ Do not determine compatibility from the breaker dimensions alone. K-Frame breakers with similar electrical ratings can have different mounting arrangements and interrupting levels.

Stage 3: Installing the New KAL36150J — 10 Minutes

  1. Compare the replacement breaker with the removed unit.
  2. Verify KAL36150J, 3 poles, and 150 A rating.
  3. Verify the voltage and interrupting rating against the system design.
  4. Confirm the physical mounting arrangement.
  5. Install the breaker without forcing it into the enclosure.
  6. Reconnect line and load conductors according to the approved wiring arrangement.
  7. Use the specified terminal torque from the applicable Square D documentation.
  8. Check that no conductor insulation is trapped beneath a terminal.
  9. Verify conductor bend radius and enclosure clearance.
  10. Confirm that the operating handle moves correctly between OFF and ON.

Self-Checklist:

  • Correct catalog number
  • 3 poles
  • 150 A rating
  • Voltage rating verified
  • AIC/SCCR verified
  • Correct mounting configuration
  • Correct conductor size
  • Terminals torqued to specification
  • No damaged insulation
  • Breaker handle operates normally

Stage 4: Power-On & Testing — 10 Minutes

  1. Perform a final mechanical inspection.
  2. Verify all tools and loose hardware have been removed.
  3. Confirm the enclosure is properly assembled.
  4. Remove lockout/tagout only under the site’s authorized procedure.
  5. Energize the upstream supply.
  6. Check the breaker and connections for abnormal heating or noise.
  7. Verify correct downstream voltage.
  8. Apply load gradually where the operating procedure permits.
  9. Confirm that the breaker does not trip under normal load.
  10. Document the installed breaker and commissioning result.

⚠️ Never repeatedly reset a breaker that trips immediately. A rapid trip can indicate a short circuit, incorrect wiring, excessive inrush, or an application problem. Find the cause before re-energizing.

 

Frequently Asked Questions (FAQ)

What is the Square D ?

It is a 3-pole, 150 A K-Frame molded case circuit breaker used for low-voltage electrical distribution and overcurrent protection. The documented KAL36150 family uses thermal-magnetic protection.

What voltage is the rated for?

The documentation specifies 600 V AC maximum and 250 V DC maximum. The actual interrupting capacity changes with system voltage, so the voltage rating alone is not enough for breaker selection.

What is the interrupting rating?

For the standard configuration, published ratings include 42 kA at 240 V AC, 25 kA at 480 V AC, and 22 kA at 600 V AC. Confirm the actual nameplate and applicable certification before using those figures for a safety-critical application.

Is the same as KA36150J?

Do not assume that they are interchangeable. The KAL and KA families can have different mounting arrangements. Documentation for identifies unit mounting, while KA36150 documentation identifies plug-on mounting for I-Line applications. Matching amperage and voltage is not sufficient.

Is the obsolete?

The is a legacy Square D K-Frame product. Current Schneider Electric catalogs use newer PowerPact families for comparable applications. That does not mean a direct replacement can be selected solely from the 150 A / 600 V rating; panel compatibility, mounting, interrupting capacity, accessories, and coordination must be checked.

For example, Schneider currently lists PowerPact J-frame alternatives such as JJL36150, a 150 A, 3-pole, 600 V AC thermal-magnetic breaker with 25 kA interrupting capacity. It is a newer product family, not automatically a drop-in replacement for a .

Can I replace the breaker with another 150 A Square D breaker?

Not without checking the complete application. Verify frame, poles, voltage, AIC/SCCR, mounting method, terminals, conductor range, accessories, and panel listing. A 150 A breaker with the wrong mounting system can be physically incompatible even when its electrical rating looks correct.

What condition should I specify when purchasing a ?

For spare-parts procurement, specify the condition explicitly: New Original / New Surplus, Factory Sealed, or Refurbished and Tested. For a used , request clear photographs of the front label, side markings, terminals, mounting interface, and trip mechanism before purchase.

Why is the important to identify by the full suffix?

Because Square D breaker catalog numbers encode configuration details. Ordering only by “150 A, 3-pole, 600 V” can result in the wrong K-Frame variant. The documentation itself distinguishes its unit-mount configuration from other Square D 150 A breaker families.