Description
Core Product Summary
The SST SST-DN3-PCI-2 is a dual-channel DeviceNet network interface card for the PCI bus, manufactured by Woodhead (Molex/SST). It provides two independent DeviceNet channels, each capable of operating as a master/scanner or slave/adapter.
The card is a universal PCI (3.3 V / 5 V) half-length board equipped with on-board processors that handle DeviceNet protocol processing. It supports standard DeviceNet baud rates of 125, 250, and 500 kbps and features 500 V network isolation. The SST-DN3-PCI-2 is widely used in industrial automation systems and is also known under the ABB designation DSQC658 (3HAC027652-001) for integration with ABB IRC5 robot controllers.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Product type | Dual-channel DeviceNet PCI interface card |
| Manufacturer / Brand | Woodhead / Molex / SST |
| Channels | 2 independent DeviceNet channels |
| Bus interface | Universal PCI (3.3 V / 5 V), 32-bit, 33 MHz |
| Protocol support | DeviceNet (Master/Scanner and Slave/Adapter); CAN 2.0 A/B |
| Baud rates | 125, 250, 500 kbps (DeviceNet) |
| Network isolation | 500 V |
| Connectors | 2 × 5-pin open-style DeviceNet connectors |
| Shared memory | Per-channel shared RAM (typically 256–512 KB class) |
| Operating temperature | 0 °C to 55 °C |
| Storage temperature | –40 °C to +85 °C |
| Humidity | 5 % to 95 % non-condensing |
| Typical current draw | Approximately 1.03 A at +5 V (dual-channel) |
| Form factor | Standard half-length PCI card |
Detailed Product Overview
The SST SST-DN3-PCI-2 is a high-performance dual-channel DeviceNet interface card designed for industrial PCs and embedded control systems. Each channel operates independently with its own processor and firmware, allowing simultaneous master and/or slave functionality on two separate DeviceNet networks without cross-interference.
The card offloads DeviceNet protocol management from the host CPU, supporting both explicit messaging and I/O data exchange. It is fully compliant with the DeviceNet specification and can function as a network scanner (master) controlling multiple slave devices or as an adapter (slave) reporting data to a higher-level controller. Standard baud rates of 125, 250, and 500 kbps are supported, with auto-baud capability in many configurations.
Physical connection is made via two 5-pin open-style DeviceNet connectors. The network interface is galvanically isolated at 500 V, providing protection against ground loops and electrical noise common in industrial environments. Diagnostic LEDs on each channel indicate network and module status.
The SST-DN3-PCI-2 is a universal PCI card that operates in both 3.3 V and 5 V signaling environments. It is commonly installed in industrial PCs and is also recognized under the ABB part number DSQC658 for use in ABB IRC5 robot controllers, where it provides deterministic communication to end-of-arm tooling, external I/O, and plant DeviceNet networks.
Firmware modules are downloadable, enabling application-specific behavior. The dual-channel design allows network segmentation—for example, separating safety-related I/O from process I/O—or redundant communication paths.

SST-DN3-PCI-2

SST-DN3-PCI-2
Dimensions, Mounting & Connection Notes
The card is a standard half-length PCI form factor. It installs in a universal PCI slot (3.3 V or 5 V keyed). Network connections use two independent 5-pin open-style DeviceNet connectors. External network power (11–24 VDC) is typically supplied via the DeviceNet cable. Status LEDs are provided for each channel. Proper ESD handling is required during installation.
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Host bus | Universal PCI (3.3 V / 5 V), 32-bit | Half-length card; PCI 2.2/2.3 compliant |
| Network protocol | DeviceNet (master or slave) | Also supports general CAN 2.0 A/B |
| Baud rates | 125 / 250 / 500 kbps | Standard DeviceNet rates |
| Connectors | 5-pin DeviceNet open-style | One per channel |
| Isolation | 500 V network isolation | Protects host from network faults |
| Operating environment | 0 °C to 55 °C, 5–95 % RH non-condensing | Suitable for control-cabinet installation |
| Typical applications | Industrial PCs, ABB IRC5 robot controllers (as DSQC658) | Dual channels enable network segmentation |
| Firmware | Downloadable application modules | Independent per channel |
FAQ
What is the SST SST-DN3-PCI-2?
It is a dual-channel DeviceNet PCI interface card that provides two independent DeviceNet ports for industrial communication.
How many DeviceNet channels does it have?
Two fully independent channels, each with its own processor.
What baud rates are supported?
125, 250, and 500 kbps (standard DeviceNet rates).
Is it compatible with ABB systems?
Yes. It is also known as the ABB DSQC658 (3HAC027652-001) and is used in ABB IRC5 robot controllers.
What type of PCI slot is required?
A universal PCI slot supporting 3.3 V or 5 V signaling.
Does each channel operate independently?
Yes. The channels are controlled by independent processors and do not affect each other’s performance.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626