Description
Core Product Summary
The Teknic SST-1500-YCX is a DSP-based digital servo drive from the SSt-1500-Y series. It functions as a high-bandwidth, fully digital vector torque amplifier that accepts a standard ±10 V analog torque command and drives brushless or brush motors.
The drive delivers up to 23 A peak (3 seconds) and 9 A RMS continuous when mounted vertically on a metal surface (11.5 A RMS with forced-air cooling). It employs synchronous vector torque control with DQ decoupling for closed-loop torque performance. The unit measures approximately 185 × 124 × 29 mm and weighs 494 g. It operates from a 20–90 VDC supply and supports a wide range of rotary, linear, galvo, and voice-coil motors with encoder feedback.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Product type | DSP-based digital servo drive / torque amplifier |
| Series | SSt-1500-Y |
| Command input | ±10 V analog torque (differential) |
| Peak current | 23 A (3 seconds) |
| Continuous current | 9 A RMS (vertical on metal surface); 11.5 A RMS (forced air) |
| PWM frequency | 28 kHz (center-balanced vector) |
| Supply voltage | 20–90 VDC |
| Dimensions | 7.31 × 4.876 × 1.156 in (185 × 124 × 29 mm) |
| Weight | 17 oz (494 g) |
| Operating temperature | 0 to 40 °C |
| Humidity | 0–95 % non-condensing |
| Encoder interface | Single-ended or differential, up to 15 MHz |
| Motor compatibility | 3-phase brushless with encoder or DC brush motors |
| Compliance | EN 61010, UL 508C, EN 50081-2 / 50082-2, EN 954-1 (with proper power control) |
Detailed Product Overview
The Teknic SST-1500-YCX is a member of the SSt-1500-Y family of DSP-based servo drives. Unlike conventional current-loop torque amplifiers that effectively run open-loop with respect to torque, the SSt-1500-Y uses proprietary sinewave vector feed-forward control with DQ decoupling. This continuously measures and corrects both the torque-producing and out-of-phase currents, placing true torque under closed-loop control.
The result is substantially faster large-signal torque response (approximately 0.1 ms versus several milliseconds for typical digital sinewave amplifiers at higher speeds). This improves tracking accuracy, reduces settling time, and increases motion smoothness, especially on axes that experience frequent acceleration changes or mechanical disturbances.
The drive accepts a standard ±10 V analog torque command, allowing drop-in compatibility with most motion controllers. It supports a broad range of motors—rotary and linear brushless servomotors, brush DC motors, galvos, and voice coils—without minimum-inductance restrictions. Encoder feedback can be single-ended or differential. Hall sensors are optional; the drive can operate in hall-less mode after initialization.
Additional features include automatic current-sensor calibration, tunable anti-resonance response, true RMS motor protection (eliminating the need for external thermal sensors in many applications), SmartSaturation for graceful handling of voltage or current limits, and a real-time analog monitor port. Dual power connectors support daisy-chain wiring. The QuietDesign EMI reduction system helps meet CE requirements with reduced external filtering.
The SST-1500-YCX is intended for OEM integration into precision motion systems where high bandwidth, repeatable torque control, and compact size are required.

SST-1500-YCX

SST-1500-YCX
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Command interface | ±10 V differential analog torque command | Standard for most servo controllers |
| Motor types | 3-phase brushless (with encoder) or DC brush | Linear, rotary, galvo, voice-coil supported |
| Encoder feedback | Single-ended or differential incremental | Max 15 MHz count rate; bad-sequence detection |
| Power supply | 20–90 VDC unregulated bulk supply | Peak and RMS current sizing application-dependent |
| Mounting | Vertical on metal surface preferred for full continuous rating | Forced-air cooling raises continuous rating to 11.5 A RMS |
| Logic / enable | Dedicated enable and limit inputs | TTL-level with internal pull-ups |
| Configuration / diagnostics | Teknic QuickSet software | Oscilloscope, shutdown history, parameter download |
Dimensions, Mounting & Connection Notes
Overall dimensions are 7.31 × 4.876 × 1.156 inches (185 × 124 × 29 mm). Weight is 17 oz (494 g). Preferred mounting is vertical on a metallic surface to achieve the 9 A RMS continuous rating; forced-air cooling increases this to 11.5 A RMS. Power connectors support daisy-chain wiring. Motor, encoder, and command connections use the drive’s standard multi-pin interfaces (exact pinouts and cable drawings are provided by Teknic). Logic and power grounds are fully isolated for improved noise immunity.
FAQ
What is the Teknic SST-1500-YCX?
It is a DSP-based digital servo drive (torque amplifier) from the SSt-1500-Y series that accepts a ±10 V analog torque command and provides closed-loop vector torque control for brushless or brush motors.
What current ratings does it offer?
23 A peak for 3 seconds; 9 A RMS continuous when mounted vertically on a metal surface; 11.5 A RMS with forced-air cooling.
What supply voltage is required?
20–90 VDC.
What motors can it drive?
Three-phase brushless motors with encoder feedback (rotary or linear) as well as DC brush motors, galvos, and voice coils.
Does it require special motor inductance?
No. It has virtually no minimum inductance restriction.
How is torque controlled?
By synchronous vector torque control with DQ decoupling and feed-forward, providing true closed-loop torque rather than independent phase-current loops.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626