Description
Core Product Summary
The TEWS Technologies TVME200-10 is a high-performance 6U/4TE VMEbus carrier board designed to interface IndustryPack (IP) mezzanine submodules into standard VMEbus control architectures. The board acts as a modular hardware bridge, accommodating up to four single-size (or two double-size) IndustryPack I/O modules on a single 6U VME slot.
Engineered for rugged industrial automation, process control, semiconductor manufacturing, and real-time test systems, the TVME200-10routes field I/O connections through four 50-pin ribbon cable connectors on its front panel. It provides address decoding, interrupt control, power distribution, and electrical isolation between the backplane host system and field submodules.
Key Technical Specifications
| Parameter | Specification |
| Manufacturer | TEWS Technologies GmbH |
| Model / Order Code | TVME200-10 (Non-RoHS Version) |
| Form Factor | 6U / 4TE VMEbus single-slot card |
| Mezzanine Slots | 4 single-size or 2 double-size IndustryPack (IP) slots |
| I/O Routing | Front-panel I/O via 4 × 50-pin flat ribbon connectors |
| VMEbus Specification | VMEbus IEEE-1014 / ANSI/VITA 1-1994 compliant |
| Address Space | A16 / A24 / A32 address space support |
| Data Width | D8 / D16 access to IP modules |
| Addressing Controls | 16-position rotary switches for short I/O and memory mapping |
| On-Board Power | Accepts +5V DC, +12V DC, and -12V DC from VME backplane |
| Operating Temperature | -40°C to +85°C industrial temperature rating |
Detailed Product Overview
The TEWS TVME200-10 serves as a flexible expansion platform within VMEbus architectures. By utilizing ANSI/VITA 4 IndustryPack standard mezzanine submodules, system designers can mix and match functional I/O types—including digital I/O, analog-to-digital converters, serial controllers, counter/timers, and encoder interfaces—onto a single VMEbus slot without replacing primary host processing units.
Addressing & Interrupt Management
The TVME200-10 features configurable address decoding logic. On-board rotary switches enable straightforward mapping of IndustryPack I/O, memory, and vector address spaces within VME Short I/O (A16) and Standard Memory (A24/A32) regions. The board translates VMEbus read/write cycles to the IP bus architecture and manages interrupt routing from individual mezzanine slots to the VMEbus backplane.
Mechanical & Front-Panel I/O Design
The card occupies a single 6U VMEbus slot. Each of the four IP module slots corresponds to a dedicated 50-pin header on the front panel. Field signals pass directly from the front connectors through the carrier to the IP submodules, keeping high-frequency digital or sensitive analog wiring decoupled from the backplane connectors.

TVME200-10

TVME200-10
Engineering Selection Highlights
- High-Density Expansion: Fits up to 4 independent I/O functions into a single 6U VME slot.
- Flexible Mezzanine Mix: Accepts any standard ANSI/VITA 4 single-size or double-size IndustryPack modules.
- Simple Address Configuration: Integrated 16-position rotary switches simplify base address and memory offset setup.
- Direct Front Panel Access: 50-pin front connectors eliminate complex custom backplane wiring harnesses.
- Wide Thermal Tolerance: Rated for reliable operation across extended industrial temperature ranges (-40°C to +85°C).
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
| Host System Architecture | 6U VMEbus Chassis / Backplane (P1/P2 connectors) | Requires a standard 6U slot with backplane power supply connections (+5V, ±12V). |
| Mezzanine Submodules | IndustryPack (IP) Modules (ANSI/VITA 4 compliant) | Supports up to 4 single-size or 2 double-size submodules. |
| Field I/O Cabling | 50-pin Flat Ribbon Cables or Strain-Relief Connectors | Connects front-panel headers (J1–J4) directly to field breakout blocks. |
| RoHS Compliance | Non-RoHS (Model suffix -10) | For RoHS-compliant installations, use model variant TVME200-10R. |
Dimensions, Mounting & Connection Notes
- Form Factor & Dimensions: Standard 6U VMEbus board width (4TE front-panel thickness).
- Chassis Installation: Align board edges with 6U card guide rails inside the VME chassis. Push firmly until backplane P1/P2 DIN connectors seat completely, then tighten top and bottom front-panel retaining screws.
- Mezzanine Mounting: Install IndustryPack submodules using mounting standoffs and securing screws prior to inserting the carrier board into the VME rack.
- Front-Panel Connectors: Four 50-pin shrouded header connectors provide pin-for-pin signal access to IP modules 1 through 4. Ensure ribbon cable connectors are fully latched before energizing host power.
FAQ
What is the primary function of the TEWS TVME200-10?
The TVME200-10 is a 6U VMEbus carrier board that hosts up to 4 IndustryPack (IP) mezzanine modules, connecting their I/O functions to a central VMEbus controller system.
What is the difference between TVME200-10 and TVME200-10R?
The TVME200-10 is the original non-RoHS compliant version, while the TVME200-10R is the lead-free/RoHS-compliant version of the same carrier board architecture.
Can double-size IndustryPack modules be used on this board?
Yes. The TVME200-10 supports either four single-size IP modules or two double-size IP modules.
How are field signals wired to the TVME200-10?
Field wiring connects to four 50-pin flat ribbon connectors located on the card’s front panel.
Verification & Troubleshooting Notes
- VMEbus System Does Not Recognize Carrier: Inspect rotary switches to ensure base memory addresses do not overlap with other VME modules installed on the backplane. Verify board is firmly seated in the slot.
- Submodule Communication Error: Turn off rack power and confirm that IndustryPack modules are properly aligned with board pins and secured to standoffs.
- Missing Channel Signal: Inspect front-panel 50-pin ribbon cable latching. Verify field terminal block connections and confirm that the IP module on that specific slot has appropriate power supplied across the VME backplane.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626