Description
Core Product Summary (Brand / Model / Key Attributes)
The UniOP TCM08A is a plug-in fieldbus communication interface module manufactured by Exor for the UniOP operator panel and HMI hardware family. Designed to expand the networking capabilities of UniOP human-machine interface (HMI) terminals, this compact communication card enables seamless, deterministic data exchange between operator panels and industrial CANopen fieldbus networks.
Engineered for factory automation and machinery control, the TCM08A installs directly into the dedicated communication expansion slot on the rear of compatible UniOP HMI units. It handles low-level CANbus protocol execution, node addressing, and network data framing onboard, freeing the main HMI processor to focus on display rendering, alarm management, and user input handling.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer & Series | Exor / UniOP HMI Series |
| Model / Part Number | TCM08A |
| Module Type | Plug-in Fieldbus Communication Interface Module |
| Network Protocol | CANopen Fieldbus (CAN 2.0B / CiA DS301) |
| Physical Interface | Sub-D 9-pin male connector (Standard CANopen pinout) |
| Baud Rate Support | Configurable from 10 kbps to 1 Mbps |
| Power Supply | Powered directly from UniOP HMI expansion slot |
| Mounting Format | Internal plug-in card into UniOP rear expansion socket |
| Operating Temperature | 0 °C to 50 °C (32 °F to 122 °F) |
| Storage Temperature | -20 °C to 70 °C (-4 °F to 158 °F) |
| Relative Humidity | 5% to 85%, non-condensing |
| Certifications | CE, cULus, industrial automation compliance |
Detailed Product Overview
The UniOP TCM08A Communication Module serves as a critical network interface bridging Exor UniOP operator panels with CANopen fieldbus control architectures. In automated production lines, packaging machinery, and material handling systems, the TCM08A allows the operator display to communicate directly with CANopen-enabled programmable logic controllers (PLCs), variable frequency drives (VFDs), servo positioning drives, and remote I/O nodes.
Architecturally, the TCM08A utilizes a dedicated CANbus controller chip and optical isolation barriers to isolate the sensitive HMI electronics from electrical noise and voltage spikes on the fieldbus cabling. By offloading protocol processing from the main UniOP display unit, the TCM08A ensures rapid screen updates and responsive touch/keypad input even during high network traffic conditions.
The module is configured using Exor’s Designer or Designer Express programming software, where engineers define CANopen Node IDs, transmission baud rates, process data objects (PDOs), and service data objects (SDOs).
Engineering Selection Highlights
- Dedicated CANopen Integration: Provides native CANopen protocol support (CiA DS301) for UniOP HMI displays.
- Plug-and-Play Expansion: Mounts directly inside the rear expansion slot of compatible UniOP panels without requiring external power supplies or gateways.
- Galvanic Isolation: Integrated optical isolation protects the HMI panel against ground potential differences and bus noise spikes.
- Flexible Baud Rates: Supports software-configurable transmission speeds up to 1 Mbps for high-speed motion and I/O monitoring.
- Compact Industrial Footprint: Internal card installation maintains the panel’s slim depth for easy mounting in shallow control cabinet doors.

TCM08A

TCM08A
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| HMI Host Panel | Exor UniOP Series HMI Terminals | Installs into rear communication module expansion slot (Slot 1/Slot 2). |
| Network Cable | Shielded Twisted-Pair CAN Cable | Connects via Sub-D 9-pin female cable with proper 120 Ω bus termination resistors. |
| Configuration Software | Exor Designer / Designer Express | Software configures node address, baud rate, and PDO/SDO mapping table. |
| Bus Termination | 120 Ω Terminal Resistors | Required at both physical ends of the CANopen network trunk line. |
Dimensions, Mounting & Connection Notes
- Mounting Method: Plugs directly into the internal expansion card socket on the rear housing of the UniOP panel; secured with retention screws.
- External Connector: Standard 9-pin male Sub-D connector accessible from the rear of the panel for fieldbus cable attachment.
- Bus Termination: If the panel is located at the physical end of the CANopen network, ensure a 120 Ω termination resistor is connected across CAN_L (pin 2) and CAN_H (pin 7).
- Thermal Range: Operates within standard industrial enclosure temperature limits of 0 °C to 50 °C (32 °F to 122 °F).
FAQ
What is the main function of the UniOP TCM08A?
The TCM08A is an expansion communication module that enables Exor UniOP HMI panels to connect directly to CANopen fieldbus networks.
Which programming software is used to set up the TCM08A?
The TCM08A is configured within Exor’s Designer HMI development software, where communication driver settings, node addresses, and baud rates are established.
Does the TCM08A require an external power supply?
No, the TCM08A receives logic power directly from the host UniOP HMI panel through its rear expansion slot connector.
What connector type is used on the TCM08A for fieldbus wiring?
The module features a standard 9-pin male Sub-D connector for CANopen network cabling.
Is bus termination required when using the TCM08A?
Yes, if the TCM08A-equipped HMI is at either physical end of the CANopen trunk line, a 120 Ω bus termination resistor must be installed across the CAN high and CAN low lines.
Verification & Troubleshooting Notes
- Module Seating: Ensure main power to the UniOP HMI is disconnected before inserting or removing the TCM08A card. Tighten retention screws to ensure a solid frame earth ground connection.
- CANopen LED Status: Inspect status indicators on the module or HMI screen: Green indicates normal operational state; Flashing Red/Amber flags baud rate mismatch, incorrect node ID, or bus-off errors.
- Bus Termination Check: Measure resistance across CAN_L and CAN_H pins with the network unpowered; a healthy bus with two end resistors should measure approximately 60 Ω.
- Node ID Verification: Confirm that the CANopen Node ID assigned in the project file does not conflict with any other active device on the CANopen bus.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626