Sale!

Valmet JETMATIC MT DV1.0 Headbox Control Module

  • Model: JETMATIC MT DV1.0
  • Associated module: RCPU 1.0
  • Brand: Valmet
  • System: JETMATIC MT
  • Application: Paper-machine headbox profile control
  • Control function: CD dry-weight / basis-weight profile control
  • Product type: Legacy process-control system module
  • Machine section: Headbox / slice
  • Technology: Jetmatic slice-lip control
  • Status: Legacy technology; exact lifecycle status of the individual module should be verified by serial number
  • Compatibility: Must be checked against the installed JETMATIC MT hardware and machine configuration
  • Condition: Confirm actual stock condition, revision, and test status before purchase
Categories: , , , , SKU: JETMATIC MT DV1.0 Brand:

Description

Key Technical Specifications

Parameter Value
Manufacturer Valmet
System JETMATIC MT
Model JETMATIC MT DV1.0
Associated CPU RCPU 1.0
Application Paper-machine headbox profile control
Control target Cross-direction dry-weight / basis-weight profile
Controlled equipment Headbox slice / slice-lip actuators
System role Profile-control system component
Industry Pulp and paper
Technology generation Legacy
Replacement consideration Valmet IQ Slice Profiler or other site-specific upgrade
Exact electrical specifications Verify from the equipment revision and original documentation

Valmet’s historical technical literature identifies Jetmatic MT specifically as a CD dry-weight control system for the headbox. Independent paper-machine equipment records also identify Jetmatic MT as a slice-control system with multiple actuators controlling slice opening.

One important distinction: DV1.0 + RCPU 1.0 should not be treated as a generic PLC or universal I/O module. Public sources do not provide enough information to establish its connector pinout, supply voltage, I/O count, communication protocol, or firmware compatibility. Those values should be taken from the actual Valmet documentation or module nameplate.

 

Product Introduction

The Valmet JETMATIC MT DV1.0 belongs to the legacy Jetmatic family used for cross-direction profile control on paper-machine headboxes. Its function is associated with controlling the slice profile through distributed slice-lip actuators, supporting uniform basis-weight distribution across the machine width.

This is primarily a maintenance and replacement component for existing Jetmatic MT installations, not a modern standalone automation controller. Valmet has documented a Jetmatic system operating for many years before its electronics and spare-parts availability became a maintenance concern.

JETMATIC MT DV1.0

JETMATIC MT DV1.0

JETMATIC MT DV1.0

JETMATIC MT DV1.0

Installation & Configuration Guide

Stage 1 — Prepare the machine

  1. Identify the existing JETMATIC MT system revision and record the DV1/RCPU identification.
  2. Back up the current controller configuration, calibration data, and machine-specific parameters.
  3. Photograph all connectors, terminals, DIP switches, jumpers, and module positions.
  4. Confirm the replacement module’s hardware revision before removing the existing unit.
  5. Apply LOTO procedures and verify that the cabinet is electrically safe.

Estimated preparation time: 30–60 minutes.

⚠️ Do not assume that a DV1.0 module with the same basic part designation has identical firmware or configuration data.

Stage 2 — Remove the existing module

  1. Isolate the relevant cabinet power supplies.
  2. Verify the absence of hazardous voltage using an appropriately rated meter.
  3. Label every connected cable before disconnection.
  4. Release the module retaining hardware according to the cabinet design.
  5. Remove the module without applying excessive force to connectors or backplane contacts.

Estimated time: 15–30 minutes.

Stage 3 — Install the replacement

  1. Inspect the replacement for bent pins, contamination, damaged connectors, or corrosion.
  2. Verify the DV1.0 and RCPU 1.0 identification against the machine documentation.
  3. Install the module in the original position.
  4. Reconnect cables according to the recorded wiring and original documentation.
  5. Recheck grounding, shielding, connector seating, and cabinet wiring.

⚠️ Do not power the system until connector orientation, module position, and configuration switches have been verified.

Stage 4 — Commission and test

  1. Restore cabinet power according to the machine’s startup procedure.
  2. Check module diagnostics and controller status.
  3. Confirm communication with the Jetmatic control system.
  4. Verify actuator feedback and commanded slice movement.
  5. Check the cross-direction profile response under controlled operating conditions.
  6. Compare the resulting profile against the previously recorded reference.
  7. Confirm that no actuator produces abnormal movement or position deviation.

Estimated commissioning time: 1–3 hours, depending on machine configuration.

For an obsolete Jetmatic installation, configuration backup is particularly important. Valmet describes its current service approach as including spare parts, maintenance, technical support, upgrades, and lifecycle services for automation systems.

 

FAQ

Is the Valmet JETMATIC MT DV1.0 still a current product?

It is best treated as legacy equipment. Valmet has documented existing Jetmatic installations that were eventually replaced because the electronics were aging and spare parts became increasingly difficult to obtain.

What does Jetmatic MT control?

Jetmatic MT was developed for cross-direction dry-weight profile control at the paper-machine headbox. The system controls the slice profile through headbox slice-lip actuators.

Is DV1.0 a direct replacement for every Jetmatic MT system?

No. The exact system revision, RCPU version, machine configuration, actuator arrangement, firmware, and wiring must be checked before replacement.

Does the replacement require programming?

It may require restoration of machine-specific configuration or calibration data. Do not assume that installing the hardware alone will reproduce the original control behavior.

Can this module be used in a modern Valmet automation system?

Not automatically. A legacy Jetmatic installation may require a migration or upgrade rather than component-for-component replacement. Valmet has documented migration from older Jetmatic slice control to the Valmet IQ Slice Profiler.

What should I verify before purchasing?

Provide a clear photo of the module nameplate, complete ordering code, hardware revision, serial number, connector side, and the associated RCPU 1.0 identification. These details are more reliable than matching “JETMATIC MT DV1” alone.

Is JETMATIC MT a paper-machine component rather than a general automation PLC?

Yes. The available technical sources specifically associate Jetmatic MT with paper-machine headbox slice/profile control, rather than general-purpose plant automation.