Description
Core Product Summary
The Vibro-Meter VM600 MPC4 is a continuously online machinery protection card serving as the central digital signal processing (DSP) module in the VM600 series machinery protection system (MPS). It provides real-time measurement and monitoring of critical rotating equipment, such as turbines and compressors, using advanced signal processing techniques.
The card features four individually programmable dynamic signal channels and two tachometer channels (excluding the SIL version), supporting acceleration, velocity, and displacement measurements. It performs simultaneous amplitude and phase monitoring, adaptive alert and danger levels, and complex calculations including Smax, eccentricity, and housing expansion. Designed for integration into standard VM600 ABE04x or ABE056 racks, the MPC4 pairs directly with an IOC4T input/output card and draws power from the rack backplane. It is available in standard, separate circuits, and safety (SIL) certified versions to meet diverse functional safety requirements.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Product Family | Vibro-Meter VM600 Series Machinery Protection System (MPS) |
| Module Type | Machinery Protection Processing Card |
| Dynamic Channels | 4 (programmable for acceleration, velocity, or displacement) |
| Tachometer Channels | 2 (standard and separate circuits versions only) |
| Processing Capabilities | Broad-band/narrow-band filtering, Smax, eccentricity, thrust position, housing expansion, dynamic pressure |
| Alarm Configuration | Programmable Alert, Danger, and OK set points with time delay, hysteresis, and latching |
| Communication Interfaces | VME bus (A24/D16 slave) and front-panel RS-232 (RS-232 only for MPC4SIL) |
| Power Supply | +5 VDC (12.5 W typ. + 1 W per active sensor) and ±12 VDC (2.5 W max) via rack backplane |
| Operating Temperature | -25 to 65 °C (-13 to 149 °F) |
| Operating Humidity | 0 to 90% non-condensing |
| Dimensions | 262 mm (H) × 20 mm (W) × 187 mm (D) |
| Weight | Approx. 0.40 kg |
| Safety Certifications | IEC 61508 (SIL 1) and ISO 13849 (PL c) for standard and SIL versions |
Detailed Product Overview
The Vibro-Meter VM600 MPC4 functions as the core processing engine for the VM600 machinery protection architecture. It continuously monitors critical rotating assets by acquiring sensor data, applying digital signal processing, and evaluating the results against configurable alarm thresholds. The four dynamic channels allow comprehensive monitoring of relative and absolute vibration, shaft position, and dynamic pressure from a single module, reducing the overall hardware footprint required for complex machinery trains.
A defining capability of the MPC4 is its support for order-tracking and adaptive alarm levels. By utilizing its integrated tachometer inputs, the card can adjust alert and danger thresholds based on real-time machine speed. This prevents false trips during transient operating conditions such as startup, shutdown, or load changes, while maintaining strict protection during steady-state operation. The module also supports advanced mathematical functions, including Smax calculation and differential housing expansion monitoring.
The MPC4 cannot operate as a standalone unit; it requires a paired IOC4T input/output card installed in the rear of the rack. The IOC4T terminates field wiring, provides sensor excitation power, and routes alarm signals to external relays. The MPC4 draws all necessary operating power (+5 VDC and ±12 VDC) directly from the VM600 rack backplane, eliminating the need for external power supplies.
The card is offered in three distinct variants to suit different application constraints. The standard and separate circuits versions include a VME bus interface, allowing networked configuration and control via a CPUx rack controller module. The MPC4SIL variant is designed for functional safety applications. It physically isolates the card from the VME bus to prevent interference from non-safety modules, meets IEC 61508 SIL 1 and ISO 13849 PL c standards, and is configured exclusively via the front-panel RS-232 port.

VM600 MPC4

VM600 MPC4
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Required Companion Module | IOC4T Input/Output Card | Must be installed in the corresponding rear slot to terminate field wiring and provide relay outputs. |
| Supported Rack Systems | VM600 ABE04x (6U) and ABE056 (1U slimline) | Installs in the front card cage; rear slot allocation depends on rack backplane mapping. |
| Power Dependency | VM600 RPS6U or RPS1U Rack Power Supply | Provides +5 VDC and ±12 VDC via the backplane; no external power required. |
| Communication Dependency | CPUx Module (e.g., CPUM) | Required for VME bus network configuration (not required for MPC4SIL or standalone RS-232 setup). |
| Signal Sharing | VM600 Raw Bus | Standard and separate circuits versions can share dynamic signal outputs with XMx16/XIO16T condition monitoring cards. |
Dimensions, Mounting & Connection Notes
- Form Factor: Standard 6U Eurocard format (262 mm height × 20 mm width × 187 mm depth).
- Mounting Method: Front-panel insertion into the VM600 rack card cage.
- Connection Type: Front-panel BNC connectors are provided for buffered raw signal analysis. Field connections are managed entirely through the paired rear-mounted IOC4T card terminal blocks.
- Environmental Limits: Operating temperature from -25 to 65 °C; operating humidity 0 to 90% non-condensing.
- Installation Constraint: The module supports hot-swapping, allowing live insertion and removal without powering down the rack, provided the system configuration and safety protocols permit it.
FAQ
What is the Vibro-Meter VM600 MPC4?
The VM600 MPC4 is a continuously online machinery protection card that serves as the central digital signal processing (DSP) module in the VM600 series machinery protection system (MPS).
How many measurement channels does the MPC4 card support?
The standard and separate circuits versions support four dynamic signal channels and two tachometer (speed) channels. The safety (MPC4SIL) version supports four dynamic channels but does not include tachometer channels.
Does the MPC4 require an external power supply?
No. The card draws its required +5 VDC and ±12 VDC power directly from the VM600 rack backplane, supplied by the rack’s RPS6U or RPS1U power supply unit.
What is the difference between the standard MPC4 and the MPC4SIL?
The standard MPC4 includes a VME bus interface for networked configuration and supports tachometer channels. The MPC4SIL variant isolates the card from the VME bus to meet functional safety standards (IEC 61508 SIL 1 / ISO 13849 PL c) and is configured exclusively via the front-panel RS-232 port.
Which companion module is required for the MPC4 to function?
The MPC4 must be paired with an IOC4T input/output card installed in the corresponding rear slot of the VM600 rack to terminate field wiring and provide relay outputs.
Can the MPC4 share sensor data with other modules in the same rack?
Yes. The standard and separate circuits versions can share dynamic signal outputs with XMx16/XIO16T condition monitoring cards via the VM600 Raw Bus.
Documented Performance Data
| Metric | Value / Range | Condition / Note |
|---|---|---|
| Analog Frequency Range | 0.1 Hz to 10 kHz | Without integration |
| Analog Frequency Range | 2.5 Hz to 10 kHz | With integration |
| Power Consumption (+5 VDC) | 12.5 W typical | Plus an additional 1 W per active sensor used |
| Power Consumption (±12 VDC) | 2.5 W maximum | Supplied via rack backplane |
| Safety Certification | IEC 61508 (SIL 1) / ISO 13849 (PL c) | Applies to standard and MPC4SIL versions |

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626