WhatsApp: +86 16626708626
Email: 
Phone: +86 16626708626Description
3. Key Technical Specifications
The Woodward 8444-1063 delivers precise monitoring and management of high-voltage industrial power systems, processing primary sensing inputs to ensure continuous operational balance and fault protection.
| Parameter | Value |
| Part Number | 8444-1063 |
| Manufacturer | Woodward, Inc. |
| Product Line | Power Management Series |
| Application | High-Voltage Switchgear & Power Distribution Control |
| Power Supply | Auxiliary DC/AC Control Power Input |
| Input Channels | Isolated High-Voltage Sensing & CT Voltage Inputs |
| Communication | Industrial Fieldbus / Serial Interfaces |
| Mounting Type | Flush / Panel Cutout Mounting |
| Operating Temperature | -20°C to +70°C |
4. Product Introduction & Supply Chain Strategy
The Woodward 8444-1063 high-voltage control module is engineered to integrate into industrial power management systems and electrical switchboards. By continuously tracking system voltage, phase parameters, and power quality across distribution lines, it prevents out-of-spec power delivery and manages automated load transfer operations.
Maintaining an uninstalled Woodward 8444-1063 in reserve as New Surplus is a critical supply chain safeguard for utility sub-stations, manufacturing plants, and heavy marine switchboards. Module failure in high-voltage control circuits can trip main feeders and disrupt facility operations. Keeping a factory-sealed unit on hand guarantees pristine internal electronics, unoxidized terminals, and rapid drop-in restoration without panel retrofitting delays.
5. Installation & Configuration Guide
High Voltage & Electrical Hazard Warning
High-voltage electrical switchgear contains lethal potentials. Always isolate, lock out, and ground main power feeds and potential transformers (PTs) prior to mounting or servicing control hardware.
1.Power System Isolation & LOTO:Prerequisite.
Perform lock-out/tag-out (LOTO) on auxiliary control power supplies and isolate high-voltage sensing lines connected to the control panel.
2.Panel Cutout Mounting:Mechanical Mounting.
Mount the 8444-1063 chassis securely into the designated enclosure cutout, tightening rear panel clamps to ensure an environmental seal.
3.Landing Sensing & Control Wiring:Wiring Setup.
Connect low-voltage auxiliary power, high-voltage PT/CT sensing leads, and industrial communication cables onto the terminal strips using shielded twisted-pair wiring.
4.System Check & Calibration:Commissioning.
Apply auxiliary power, verify display and communication diagnostics, and perform dead-bus/live-bus checks before re-energizing primary high-voltage circuits.
8444-1063
6. Firmware/Software Versions & Upgrade Notes
- System Integration: Fully compatible with standard Woodward power management control networks and industrial SCADA protocols.
- Configuration: Parameter setup and diagnostic logs are accessible via standard Woodward configuration tools or front panel menu navigation.
- Terminal Safety: Ensure proper terminal shroud installation on all high-voltage sensing connections.
7. Frequently Asked Questions (FAQ)
Q: Is this Woodward 8444-1063 unit genuinely new?
A: Yes, this item is a Brand New Surplus unit. It has never been installed in an active panel or wired to high-voltage equipment, and is preserved in protective OEM packaging.
Q: What application is the 8444-1063 designed for?
A: It is designed for industrial high-voltage power management, switchgear control, and distribution system protection.
Q: Can this unit replace older control hardware directly?
A: Yes, provided the wiring terminal layout and configuration parameters match your existing switchgear schematic.
Q: What warranty accompanies this unit?
A: Every Woodward 8444-1063 module comes with a full 1-year replacement warranty and a certified quality verification report prior to shipment.
