Sale!

Woodward MRN3-11D Mains Decoupling Relay

  • Model: MRN3-11D
  • Brand: Woodward
  • Series: MRN3
  • Core Function: Mains decoupling / grid protection for generators
  • Product Type: Multifunctional Protection Relay
  • Key Specs: Over/under voltage, over/under frequency, vector surge (or df/dt) protection
  • Condition: New Original / New Surplus
Categories: , , , , SKU: MRN3-11D Brand:

Description

3. Key Technical Specifications

  • Protection functions:
    – Two-step overvoltage and undervoltage
    – Multi-step overfrequency and underfrequency
    – Vector surge detection (MRN3-1 style) or rate-of-change of frequency df/dt (MRN3-2 style)
  • Measuring inputs: Three-phase voltage (star or delta connection possible)
  • Rated voltages: Typically configurable for 100 V, 230 V, or 400 V systems
  • Frequency range: Wide operating range covering 50/60 Hz systems
  • Processing: Microprocessor-based with digital filtering and discrete Fourier analysis for harmonic suppression
  • Parameter sets: Two independent parameter sets
  • Outputs: Multiple programmable output relays (including self-supervision)
  • Additional features: Fault recorder, watchdog, independent time delays for voltage and frequency elements
  • Communication: RS-485 / Modbus available on many versions
  • Housing: Compact design suitable for 19″ rack or flush mounting
  • Note: Exact rated voltage, vector-surge vs. df/dt variant, and communication options must be confirmed against the unit label and original order code.

4. Product Introduction

The Woodward MRN3-11D is a compact mains decoupling relay designed for the parallel operation of generators with the utility grid. It combines voltage, frequency, and vector-surge (or df/dt) protection in a single microprocessor-based device.

This relay meets the requirements of utilities (including VDEW-type specifications) for rapid and reliable disconnection of generators in the event of mains failure or abnormal grid conditions. It is widely used in power stations, cogeneration plants, and industrial generator installations where fast and selective grid decoupling is required.

MRN3-11D

MRN3-11D

MRN3-11D

MRN3-11D

5. Troubleshooting Quick Reference

Symptom Possible Cause Relevance to this Part Quick Check Method Recommendation
Relay does not power up Auxiliary supply missing or incorrect ✅ High Measure auxiliary voltage at terminals Restore correct auxiliary supply
Unexpected trip Incorrect settings or CT/VT ratio mismatch ✅ High Review voltage/frequency thresholds and time delays Verify settings against grid code and generator data
No trip on known grid event Vector-surge or frequency element disabled / wrong setting ✅ High Check active protection elements and parameter set Enable and correctly set the required functions
Communication failure RS-485 wiring or address/baud-rate error ✅ Medium Verify bus wiring, termination, and interface parameters Correct communication settings
Fault recorder empty or not useful Recording not enabled or memory overwritten ✅ Medium Check fault-recorder configuration Enable recording and download events after a trip
Self-supervision alarm active Internal fault or configuration error ✅ High Note exact status and LED indication Replace the relay if self-test fails after power cycle

If the issue cannot be resolved, photograph the front panel, terminal labeling, and settings, then contact technical support with the full model and serial number.

6. Frequently Asked Questions (FAQ)

Q: What is the main purpose of the MRN3-11D?
A: It is a mains decoupling relay that protects generators operating in parallel with the utility grid by detecting abnormal voltage, frequency, or vector-surge conditions and initiating rapid disconnection.

Q: Does it include vector-surge protection?
A: The MRN3 series offers variants with vector-surge detection (typically MRN3-1 style) or rate-of-change of frequency (df/dt). Confirm the exact function set on your unit.

Q: Can the relay be used for both 50 Hz and 60 Hz systems?
A: Yes. The frequency supervision covers the normal range of both 50 Hz and 60 Hz grids.

Q: How many parameter sets does it have?
A: Two independent parameter sets are available, allowing different settings for different operating modes.

Q: Is a fault recorder included?
A: Yes. The relay includes a fault-value recorder that stores instantaneous values for post-event analysis.

Q: What mounting options are available?
A: The MRN3 is typically available in 19″ rack (12TE) or flush-mounting housings. Confirm the exact housing of the unit you need.

Q: What condition and warranty do you offer?
A: We supply New Original / New Surplus stock. Units are inspected for basic functionality. Standard coverage is a 1-year warranty against defects. Always provide the complete model MRN3-11D (and any additional order codes or voltage rating) when ordering or requesting support.