Description
Core Product Summary
The Woodward 8440-2165 is a microprocessor-based synchronizing unit from the SPM-D11 series, designated for models such as SPM-D1115B. It provides automatic frequency, phase, and voltage matching for one- or three-phase AC generators equipped with compatible speed controls and automatic voltage regulators.
The unit combines synchronization for one circuit breaker with load and power factor control or isochronous load sharing, plus generator protection functions. It supports analog or discrete output bias signals, true RMS voltage sensing, and configuration via front panel or PC. Power supply is 12/24 Vdc. Measuring inputs are available in 100 Vac or 400 Vac voltage ratings with 1 A or 5 A current transformer options depending on the exact configuration.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Product type | Synchronizing unit / Load share synchronizer |
| Series | SPM-D11 |
| Part number | 8440-2165 |
| Functions | Synchronization, synch-check, black start, load/var control, load/var sharing, generator protection |
| Measuring voltage options | [1] 57/100 (120) Vac or [4] 230/400 Vac |
| Measuring frequency | 40.0 to 70.0 Hz |
| Current transformer secondary | ../1 A or ../5 A |
| Accuracy | Class 1 |
| Power supply | 12/24 Vdc (9.5 to 32 Vdc) |
| Intrinsic consumption | Max. 10 W |
| Ambient temperature | –20 to 70 °C |
| Ambient humidity | 95 %, non-condensing |
| Mounting | Flush-mounting [B] |
| Housing | Type APRANORM DIN 43 700 |
| Dimensions | 144 × 72 × 122 mm |
| Installation cut-out | 138[+1.0] × 67[+0.7] mm |
| Front protection (with proper installation) | IP42 (IP54 with optional gasket) |
| Approvals | CE marked, UL/cUL listed |
Detailed Product Overview
The Woodward 8440-2165 belongs to the SPM-D11 family of microprocessor-based synchronizing units. It is designed for use on one- or three-phase AC generators that are equipped with Woodward or other compatible speed controls and automatic voltage regulators.
The unit performs automatic frequency, phase-angle, and voltage matching. Control outputs can be configured as analog bias signals or discrete raise/lower pulses to suit different governor and AVR interfaces. This flexibility allows application across a range of prime movers, from fast-responding diesel engines to slower gas turbines.
In addition to basic synchronization of one circuit breaker, the SPM-D11 integrates load and reactive-power (var) control. In isolated operation it supports isochronous load sharing via analog load-share lines. In mains-parallel operation it provides active-power and power-factor control. Dead-bus closing and synch-check functions are included, along with generator protection features such as over-/undervoltage, over-/underfrequency, overload, reverse power, and reduced power.
True RMS voltage sensing reduces susceptibility to harmonics. Measured values for generator and bus voltage and frequency are shown on a two-line illuminated LCD, supplemented by LED indicators and a front-panel synchroscope for commissioning. Configuration is performed either through the front-panel HMI or via PC software.
The unit is supplied for flush panel mounting. Terminal connections use screw or plug terminals rated for 1.5 mm² or 2.5 mm² conductors. Discrete inputs are isolated and accept a wide voltage range. Relay outputs provide breaker close commands and alarm signaling.

SPM-D1115B 8440-2165

SPM-D1115B 8440-2165
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Speed control / AVR | Woodward or other compatible units | Analog or discrete bias signals selectable |
| Generator type | One- or three-phase AC | Two-phase voltage sensing of generator and bus |
| Power supply | 12/24 Vdc (9.5–32 Vdc) | Isolated from discrete inputs |
| Measuring inputs | Voltage: 100 Vac or 400 Vac options; CT secondary: 1 A or 5 A | Confirm exact rating on unit nameplate |
| Configuration | Front-panel HMI or PC software (LeoPC / Toolkit) | RS-232 requires Woodward DPC cable for older versions |
| Mounting | Flush panel (DIN 43700 style) | Optional gasket for higher front IP rating |
| Circuit breaker | One breaker control | Close command via relay output |
Dimensions, Mounting & Connection Notes
- Overall dimensions: 144 mm (W) × 72 mm (H) × 122 mm (D)
- Panel cut-out: 138[+1.0] × 67[+0.7] mm
- Mounting method: Flush-mounting in control panel
- Front protection: IP42 standard; IP54 achievable with optional gasket
- Terminals: Screw or plug type, 1.5 mm² or 2.5 mm²
- Wiring: Voltage and current measuring circuits, discrete inputs, relay outputs, and controller bias outputs according to the unit’s wiring diagram
FAQ
What is the Woodward 8440-2165?
It is a microprocessor-based synchronizing unit from the SPM-D11 series used for automatic frequency, phase, and voltage matching of AC generators.
What functions does the SPM-D11 provide?
Synchronization for one circuit breaker, synch-check, black-start capability, load and power-factor control, isochronous load/var sharing, and generator protection.
Which generators is it suitable for?
One- or three-phase AC generators equipped with Woodward or other compatible speed controls and automatic voltage regulators.
What are the measuring input options?
Voltage measuring inputs are available as 100 Vac or 400 Vac versions; current transformer secondary ratings are 1 A or 5 A depending on the exact configuration.
How is the unit configured?
Via the front-panel HMI or PC configuration software.
What is the power supply requirement?
12/24 Vdc (operating range 9.5 to 32 Vdc).
What mounting style is used?
Flush panel mounting conforming to DIN 43700 dimensions (144 × 72 × 122 mm).

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626