Sale!

Yaskawa JGSM-06 AC Servo Motor

  • Model: JGSM-06
  • Brand: Yaskawa Electric
  • Series: JGSM Industrial Servo Motor Series
  • Core Function: High-precision rotary motion and dynamic torque delivery.
  • Product Type: AC Servo Motor
  • Key Specs: 600 W Rated Output | Industrial Grade Enclosure | High-Resolution Encoder Feedback
  • Condition: New Original / New Surplus (Never refurbished)
  • Inventory Status: Legacy / Discontinued Series — Strategic Buffer Stock Recommended
Categories: , , , , SKU: JGSM-06 Brand:

Description

Key Technical Specifications

Parameter Specification
Manufacturer Yaskawa Electric Corporation
Motor Type Permanent Magnet AC Servo Motor
Rated Output Power 600 W
Nominal Voltage 200 V AC Class
Rated Torque / Speed Standard industrial rating for 600 W frame size
Feedback Device Integrated High-Resolution Encoder (Incremental / Absolute depending on sub-code)
Cooling Method Totally Enclosed, Self-Cooled (Natural Convection)
Protection Rating IP65 (excluding shaft opening)
Ambient Operating Temp 0 to +40 °C
Mounting / Shaft Configuration Flange Mount / Straight Shaft with Keyway option

 

Product Introduction & Supply Chain Strategy

This product is a Brand New Surplus unit. It is not used, not pulled from a decommissioned plant, and not refurbished. All modules undergo rigorous quality verification to ensure OEM-level reliability.

The Yaskawa JGSM-06 is an industrial AC servo motor engineered for high-dynamic positioning tasks in automated manufacturing equipment, packaging machinery, robotics, and CNC machine tools. Designed to pair seamlessly with Yaskawa servo drives, it provides accurate speed and torque control under continuous thermal cycling and high duty cycles.

From a Total Cost of Ownership (TCO) perspective, procuring a New Surplus JGSM-06 provides an essential safety net against sudden machine stoppage. When a critical motion axis fails on an active production line, sourcing factory-fresh legacy motors under standard lead times can cause extended downtime. Refurbished motors from secondhand sources routinely suffer from degraded rotor magnets, worn bearings, and heat-damaged insulation that leads to premature winding shorts. Maintaining a genuine New Surplus JGSM-06 on-site guarantees full original operating life, eliminates lead time variability, and enables rapid plug-and-play machine restoration.

JGSM-06

JGSM-06

JGSM-06

JGSM-06

Installation & Configuration Guide

Stage 1: Pre-Installation (Prep & Safety)

  1. Execute full Lock-Out/Tag-Out (LOTO) procedures on the incoming main power and connected servo drive amplifier.
  2. Wait a minimum of 10 minutes to allow the servo drive’s internal DC bus capacitors to discharge fully. Verify zero voltage at the drive terminals using a calibrated multimeter.
  3. Put on an ESD-grounded wrist strap before handling encoder connections or interface cables.
  4. Record motor mounting orientation, keyway alignment, cable coupling positions, and parameter settings from the existing installation using clear photographs.

Stage 2: Removal

  1. Carefully unthread and disconnect the motor power connector and encoder feedback cable. Avoid pulling directly on the wire bundles.
  2. Unbolt the mechanical coupling, pulley, or gearbox interface attached to the output shaft using proper pulling tools to avoid axial shock loads.
  3. Remove the four flange mounting bolts securing the motor frame to the mounting bracket.
  4. Support the weight of the JGSM-06 and slide it straight out axially to protect the mounting pilot register.

Stage 3: Installation (Clone & Seat)

  1. Remove the New Surplus JGSM-06 from its protective box within a clean, ESD-safe environment. Inspect the output shaft and connectors for any transport debris.
  2. Align the motor pilot register with the mounting housing and slide the unit into place.
  3. Insert and hand-tighten the four flange bolts, then torque them down in a diagonal cross-pattern to OEM torque values.
  4. Reattach the mechanical coupling, ensuring proper shaft axial and radial alignment tolerances to prevent bearing loading.

Stage 4: Power-On & Testing

  1. Reconnect the power and encoder feedback cables, ensuring threaded collars or latch mechanisms lock securely to preserve IP65 sealing.
  2. Re-energize the servo drive control logic. Confirm that no encoder feedback or communication fault alarms are triggered on the drive display.
  3. Perform a low-speed jog test to verify proper rotation direction, smooth encoder feedback counting, and correct holding brake operation (if equipped).

 

Firmware/Software Versions & Upgrade Notes

  • Drive System Compatibility: Fully compatible with matching Yaskawa AC Servo Drive amplifiers designated for 200 V class 600 W motor pairings.
  • Encoder Alignment: The integrated encoder is factory-aligned to the rotor’s magnetic poles. Do not loosen or attempt to disassemble the rear encoder housing, as misaligning the feedback commutation angle will cause immediate drive overcurrent trips or erratic motor runaway upon system enable.
  • Parameter Notes: When swapping a motor, ensure that motor model codes, encoder resolution parameters, and current limit profiles stored in the host drive match the nameplate ratings of the JGSM-06.

 

Frequently Asked Questions (FAQ)

Q: Why is this New Surplus priced higher than refurbished motors, but lower than factory list price?

A: Our price reflects the true market value of securing an authentic, unused OEM motor. Refurbished motors are often salvaged from worn production machinery, cosmetically repainted, and resold with aged windings and bearings. While refurbished units may cost less initially, unexpected failure can lead to expensive downtime. Our New Surplus inventory provides factory-level reliability and service life at a significant savings compared to legacy OEM quotes.

Q: Is this Yaskawa motor guaranteed to be completely new?

A: Yes. This motor is 100% Brand New Surplus. It has never been installed on an industrial machine, never energized in a plant, and carries no mechanical wear. It comes directly from verified surplus inventory, system integrator overstock, and canceled project reserves.

Q: Can I disconnect or reconnect the motor cables while the servo drive is turned on?

A: No. Plugging or unplugging the power or feedback connectors while the servo drive is energized can cause heavy electrical arcing and voltage transients. This can damage internal encoder electronics, burn connector contacts, and trip the servo drive’s power stage. Always isolate power before making or breaking connections.

Q: Will replacing the motor require mechanical shaft zeroing or homing?

A: Yes. While the electrical parameters will match automatically once connected to the drive, replacing a physical motor alters the mechanical shaft reference position slightly. You must rerun the machine’s homing calibration routine or reset the home position offset parameter in your controller prior to running automatic production cycles.

Q: What warranty coverage comes with this New Surplus motor?

A: We provide a full 1-Year functional warranty on this New Surplus motor. Every unit undergoes multi-step quality checks—including shaft rotation checks, winding resistance verification, and physical connector inspection—to guarantee drop-in readiness out of the box.