Description
Core Product Summary
The Yaskawa USAGED-13A21SE is a 1.3 kW AC servo motor from Yaskawa’s US G Series. It is a totally enclosed, self-cooled servomotor rated for 1500 rpm and 8.34 N·m of torque, with ferrite permanent magnets and a design revision order of A.
This model includes an 8192 P/R incremental encoder for closed-loop servo control. Its taper shaft, drive-end oil seal, and opposite-drive-end brake make it suitable for motion applications that require secure shaft mounting, protection against oil ingress at the shaft end, and a holding brake when the servo drive is disabled or power is removed.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Brand / model | Yaskawa USAGED-13A21SE |
| Product type | AC servo motor |
| Motor type / series | US G Series |
| Rated output | 1.3 kW (1.7 HP) |
| Rated speed | 1500 rpm |
| Rated torque | 8.34 N·m |
| Rated current | 11.7 A |
| Magnet type | Ferrite |
| Enclosure | Totally enclosed, self-cooled |
| Feedback device | 8192 P/R incremental encoder |
| Shaft type | Taper |
| Drive-end specification | With oil seal |
| Opposite-drive-end specification | With brake |
| Design revision order | A |
Engineering Selection Highlights
- The 1.3 kW, 1500 rpm, 8.34 N·m rating defines the continuous operating envelope for axis sizing and servo-drive selection.
- The built-in 8192 P/R incremental encoder provides position and speed feedback for a closed-loop servo system.
- The taper shaft requires a matching tapered hub or coupling arrangement; it is not a straight-shaft mounting interface.
- The drive-end oil seal is relevant where lubricant, oil mist, or contaminated conditions are present near the shaft opening.
- The opposite-drive-end brake provides a holding function; the control system must provide the required brake-release logic and power.
- The totally enclosed, self-cooled enclosure means heat dissipation depends on the motor’s surface and installation environment rather than an external cooling fan.
- The design revision order A should be checked when matching an existing machine, replacement motor, or servo-drive configuration.

USAGED-13A21SE

USAGED-13A21SE
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Servo drive | Requires a compatible Yaskawa servo amplifier / SERVOPACK | The motor is a servo actuator and must be paired with a drive that supports its feedback and power requirements. |
| Feedback interface | 8192 P/R incremental encoder | The servo drive and motion controller must support incremental encoder feedback. |
| Shaft connection | Taper shaft | Use a coupling or pulley hub designed for the motor’s tapered shaft interface. |
| Brake control | Opposite-drive-end brake installed | Provide a brake power/release circuit and coordinate it with servo-enable and safety logic. |
| Environmental sealing | Drive-end oil seal | Select for installations where shaft-end oil exposure or ingress protection is required. |
| Cooling | Self-cooled, totally enclosed construction | Allow adequate surrounding airflow and avoid enclosing the motor without thermal consideration. |
Dimensions, Mounting & Connection Notes
- Motor construction: totally enclosed, self-cooled.
- Shaft interface: taper shaft.
- Drive end: fitted with an oil seal.
- Opposite drive end: fitted with a brake.
- Feedback connector and power/brake connections must be installed according to the applicable Yaskawa motor and servo-drive documentation.
- Encoder cabling should be routed and shielded according to the servo-system installation requirements to preserve feedback signal integrity.
Detailed Product Overview
The Yaskawa USAGED-13A21SE is a rotary AC servo motor designed for closed-loop motion control with a compatible Yaskawa servo amplifier. It belongs to the US G Series and is rated at 1.3 kW, 1500 rpm, and 8.34 N·m. Its rated current is 11.7 A, which is a key parameter for confirming amplifier current capacity and supply-side electrical design.
The motor uses ferrite permanent magnets and a totally enclosed, self-cooled enclosure. In practical terms, this construction contains the motor’s internal components while relying on the housing surface for heat dissipation. Installation planning should therefore account for ambient temperature, airflow around the motor body, duty cycle, and the thermal effects of mounting hardware.
Position feedback is provided by an 8192 P/R incremental encoder. Because it is incremental rather than absolute, the drive must perform the appropriate homing or reference procedure after power-up where absolute position retention is required by the machine function. The encoder interface must match the connected servo drive and feedback cable arrangement.
Mechanically, the USAGED-13A21SE has a taper shaft, which provides a secure hub-mounting interface when the correct tapered hub or coupling is used. The drive end also includes an oil seal, while the opposite drive end includes a brake. The brake is a distinct electromechanical function: it must be controlled separately from the servo-enable signal, and its release state should be verified before manual shaft rotation or commissioning.
For procurement and replacement, the complete order code matters. The model identifies the 1.3 kW output class, 8192 P/R incremental feedback, taper shaft, oil seal, brake, and design revision order A. Matching all of these attributes helps ensure that the replacement motor aligns with the original machine’s mechanical interface, feedback requirement, and brake-control arrangement.
Applications & System Role
In a servo motion system, the USAGED-13A21SE acts as the electromechanical actuator for a controlled axis. It converts commanded current from a servo drive into controlled torque, speed, and position, while its incremental encoder returns feedback to close the control loop.
The combination of 1.3 kW output, 1500 rpm rated speed, and 8.34 N·m rated torque makes the motor suitable for general servo-axis duties where medium torque and controlled motion are required. The integrated brake is particularly relevant for vertical axes, held positions during drive-off conditions, or machinery where the load must be retained when servo power is removed. The oil-sealed drive end supports installations where the shaft area may be exposed to oil or lubricant.
FAQ
What is the Yaskawa USAGED-13A21SE?
It is a 1.3 kW AC servo motor from Yaskawa’s US G Series, equipped with an incremental encoder, taper shaft, oil seal, and brake.
What is its rated output and speed?
The motor is rated at 1.3 kW (1.7 HP) and 1500 rpm.
What torque does it provide?
Its rated torque is 8.34 N·m.
What feedback device does it use?
It uses an 8192 P/R incremental encoder.
Does the USAGED-13A21SE include a brake?
Yes. It includes a brake at the opposite drive end.
What type of shaft does it have?
It has a taper shaft.
What is the purpose of the oil seal?
The oil seal is fitted at the drive end and helps protect the shaft-end area from oil exposure or ingress.
What type of enclosure does it have?
It has a totally enclosed, self-cooled enclosure and uses ferrite permanent magnets.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626