Description
Core Product Summary
The Yokogawa VF701 is a V net control bus interface card that connects a PC/AT-compatible computer to a Yokogawa V net control network. Installed in a PCI Express slot, it enables the computer to communicate with Yokogawa control stations for tag-data read/write operations and process-message reception.
The VF701 uses a 10BASE-2 coaxial connection through a BNC connector and supports a maximum cable distance of 185 m when using 10BASE-2 cable only. It is used with Yokogawa Exaopc and other applications that require a direct V net connection, and the host PC must provide 5 V DC PCI power.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | Yokogawa Electric Corporation |
| Model | VF701 |
| Product type | V net control bus interface card |
| Host interface | PCI Express |
| Network interface | V net control bus |
| Network transmission | 10BASE-2 |
| Network connection | Coaxial cable |
| Connector | BNC |
| Maximum cable distance | 185 m, using 10BASE-2 cable only |
| Compatible cable | Yokogawa Model YCB146 |
| Required connector accessory | T-type connector |
| Host PC power requirement | 5 V DC PCI power supply |
| Card dimensions | 22 mm W × 126.5 mm H × 193.54 mm D |
| Card weight | Approximately 0.15 kg, excluding T-type connector |
| Country of origin | Japan |
Detailed Product Overview
The Yokogawa VF701 provides the hardware interface between a PC-based application and a Yokogawa V net control network. By installing the card in a PCI Express slot, the host computer joins the V net and can exchange operational data with connected control stations.
A principal use is with Yokogawa Exaopc. When Exaopc is installed on the same PC as the VF701, the PC connects directly to the control bus and communicates with control stations to read and write tag data and receive process messages. This direct connection supports OPC clients and supervisory applications that need access to Yokogawa control-system data.
The VF701 uses a 10BASE-2 coaxial electrical interface with a BNC connector. The network cable is Yokogawa Model YCB146, and a T-type connector is required for the bus connection. The specified maximum distance is 185 m when the connection uses 10BASE-2 cable only.
The card requires a host PC with a 5 V DC PCI power supply. Before installation, the PC power-supply specification must be checked to ensure that it supports the 5 V DC requirement of the VF701.
The VF701 is a V net interface card, not a Vnet/IP interface card. Yokogawa identifies VI702 and VI701 as the Vnet/IP interface cards, while VF702 and VF701 are V net interface cards. System selection should therefore confirm whether the target Yokogawa system uses V net or Vnet/IP before ordering.

VF701

VF701
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Control network | Yokogawa V net | The VF701 is a V net interface card. |
| Host computer | PC/AT-compatible computer with a PCI Express slot | The card installs in the PC expansion slot. |
| Host power | 5 V DC PCI power supply | The PC power supply must support the VF701’s 5 V DC requirement. |
| Network cable | Yokogawa Model YCB146 coaxial cable | Required for the V net connection. |
| Connector | BNC connector and T-type connector | The T-type connector is required for the bus connection. |
| Network standard | 10BASE-2 | Maximum distance is 185 m using 10BASE-2 cable only. |
| Software | Yokogawa Exaopc for direct control-bus OPC communication | Exaopc uses the VF701 to communicate with control stations. |
| Data functions | Tag-data read/write and process-message reception | Supported through the direct V net connection. |
| Vnet/IP systems | Not a Vnet/IP interface card | Use VI702 or VI701 for Vnet/IP connections. |
Dimensions, Mounting & Connection Notes
- Card dimensions: 22 mm wide × 126.5 mm high × 193.54 mm deep.
- Card weight: Approximately 0.15 kg, excluding the T-type connector.
- Mounting method: Installs in a PCI Express expansion slot of a PC/AT-compatible computer.
- Network connection: BNC connector for 10BASE-2 coaxial cable.
- Cable requirement: Yokogawa Model YCB146 coaxial cable.
- Required accessory: T-type connector for the V net bus connection.
- Maximum cable distance: 185 m when using 10BASE-2 cable only.
- Power requirement: The host PC must provide 5 V DC PCI power.
FAQ
What is the Yokogawa VF701?
It is a Yokogawa V net control bus interface card that connects a PC/AT-compatible computer to a V net control network.
Which computer interface does the VF701 use?
It installs in a PCI Express expansion slot.
What network connection does it provide?
It provides a 10BASE-2 coaxial V net connection through a BNC connector.
What cable is required for the VF701?
It uses Yokogawa Model YCB146 coaxial cable and requires a T-type connector.
How far can the VF701 connect?
The specified maximum distance is 185 m when using 10BASE-2 cable only.
What power does the VF701 require?
The host PC must provide 5 V DC PCI power.
Can the VF701 connect to a Vnet/IP network?
No. The VF701 is a V net interface card. For Vnet/IP, Yokogawa identifies the VI702 or VI701 interface card.
What software uses the VF701?
Yokogawa Exaopc can use the VF701 for direct control-bus communication, including tag-data read/write operations and process-message reception.
Documented Performance Data
| Metric | Value / Range | Operating condition |
|---|---|---|
| Network standard | 10BASE-2 | V net coaxial connection |
| Maximum cable distance | 185 m | 10BASE-2 cable only |
| Host power requirement | 5 V DC | PCI power supply |
| Card dimensions | 22 × 126.5 × 193.54 mm | Excluding T-type connector |
| Card weight | Approximately 0.15 kg | Excluding T-type connector |

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626