WhatsApp: +86 16626708626
Email: 
Phone: +86 16626708626Description
Key Technical Specifications
- Model: 3BSE018741R15
- Manufacturer: ABB
- Product description: Cable with male plug connector
- Cable length: 15 m
- Connector type: Male plug connector
- Pin count: 5-pin
- Customs tariff number: 85389091
- Gross weight: 2.5 kg
- Invoice description: Cable with male plug connector, 15
- Made to order: No
Product Introduction
ABB 3BSE018741R15 is a 15 m cable with a male plug connector for industrial control and instrumentation use. ABB lists it as a cable with male plug connector, 15 m, and market listings identify it as a 5-pin cable assembly.new.
This part is usually chosen when the exact connector style and cable length matter more than substitutions. Verify pinout, mating interface, and cable routing before ordering, because the wrong connector family or length creates avoidable installation delay.
- 3BSE018741R15
- 3BSE018741R15
Troubleshooting Quick Reference
| Symptom | Possible Cause | Relevance to this Part | Quick Check Method | Recommendation |
|---|---|---|---|---|
| Device will not communicate after cable swap | Wrong pinout or incompatible mating connector | ✅ High | Compare connector pin count and wire mapping against the OEM drawing | Confirm the exact mating device and wiring before replacement |
| Intermittent signal loss | Loose plug engagement or damaged conductor | ✅ High | Inspect connector retention, then perform continuity check end to end | Reseat the connector and test continuity on each core |
| Cable shows open circuit on one or more pins | Broken conductor or termination damage | ✅ High | Use a multimeter in continuity mode on each pin pair | Replace the cable if any conductor reads open |
| Signal works only when cable is moved | Internal wire fracture near connector | ✅ High | Wiggle test while monitoring continuity and signal stability | Replace immediately; field repair is rarely reliable |
| Noise or unstable readings | Shielding or grounding issue | ⚠️ Medium | Check shield termination and routing near high-power cabling | Reroute and verify shielding practice before condemning the cable |
| Physical damage at jacket or connector | Handling damage or bend radius abuse | ✅ High | Inspect for cuts, flattening, crushed boots, or bent contacts | Replace if insulation or connector integrity is compromised |
If you are stuck, contact technical support with photos, pinout details, and continuity test results.
Frequently Asked Questions (FAQ)
Q: What is ABB 3BSE018741R15?
A: It is a 15 m cable assembly with a male plug connector. ABB’s product listing describes it that way directly, so this is not a module or processor part.
Q: Is this a direct replacement for any ABB cable?
A: Only if the connector style, pin count, cable length, and mating interface match exactly. Do not assume another ABB cable with a similar part number will fit.new.
Q: Is it new original or refurbished?
A: For this listing format, present it as New Original or New Surplus if it is unused stock. The ABB listing itself does not indicate refurbishment.
Q: Why would this be cheaper than factory direct?
A: Surplus channels usually price lower because the part may be excess inventory, discontinued stock, or held by a third-party reseller rather than sold through OEM distribution. That price gap is normal, but you should still verify condition and traceability.
Q: Can I install it without checking anything first?
A: No. Verify connector gender, pin count, cable length, and routing first. A cable is simple hardware, but a wrong connector or incorrect pinout still stops the job.new.
Q: What should I send if I need help identifying compatibility?
A: Send a photo of the old cable, the mating device label, and any pinout or wiring drawing you have. For cable parts, those three items usually solve the compatibility question fast.
