Description
Core Product Summary (Brand / Model / Key Attributes)
The ABB 5SHX0660F0002.1 (also identified under system part number 3BHB018104R0001) is a high-power Integrated Gate-Commutated Thyristor (IGCT) module with an integrated gate driver unit. Designed for medium-voltage industrial drives and high-power converter architectures—such as the ABB ACS5000 series, voltage-source inverters, and static breakers—the assembly integrates the press-pack power semiconductor disk with direct-mounted driving electronics to achieve low commutation inductance and fast switching response.
This module features a fiber-optic control interface operating at 650 nm using HFBR-series optical connectors for galvanic isolation and electromagnetic noise immunity. The integrated gate unit incorporates diagnostic monitoring including supply voltage detection, gate-cathode short-circuit protection, and optical status feedback. The power supply circuit requires square-wave AC input voltage (with a startup threshold of at least 28 V) and achieves a nominal switching delay of approximately 2.8 µs alongside built-in glitch filtering to eliminate spurious control signals.
Key Technical Specifications
| Parameter | Specification / Value |
|---|---|
| Product Type | Integrated Gate-Commutated Thyristor (IGCT) Module with Gate Unit |
| ABB System Part Number | 3BHB018104R0001 |
| Control Interface | 650 nm Optical Interface (HFBR-1528 / HFBR-2521Z) |
| Optical Fiber Type | 1 mm POF (Plastic Optical Fiber) or 200 µm HCS (>15 m distances) |
| Turn-On / Turn-Off Delay | ~2.8 µs (measured from 50% command signal to 50% VGK) |
| Glitch Filter Suppression | Ignores command pulses shorter than 400 ns |
| Power Supply Requirement | Square-wave AC input only (sinusoidal AC prohibited); ≥28 V start-up voltage |
| Re-Triggering Interval | External re-triggering via 0.7–1.1 µs OFF pulses (>20 µs after turn-on) |
| dv/dt Immunity | >20 kV/μs (4 kV) |
| di/dt Immunity | 5 kA/μs (7 kA) |
| Magnetic Field Immunity | Withstands up to 40 kA magnetic field at 30 cm distance |
| Vibration Resistance | IEC 68 compliant: 5–57 Hz (±0.175 mm sweep), 57–150 Hz (2.5 gn) |
| Shock Rating | Up to 30 gn / 11 ms duration |
| Integrated Diagnostics | Optical status feedback, onboard LEDs, gate-cathode short circuit detection |
Detailed Product Overview
The ABB 5SHX0660F0002.1 combines a high-voltage power semiconductor with an optimized gate drive unit in a single integrated housing. In medium-voltage power conversion applications, traditional discrete gate drive connections introduce parasitic inductance that restricts switching speeds and maximum turn-off current capability. By mounting the gate driver board coaxially around the semiconductor press-pack element, the IGCT architecture minimizes loop inductance between the gate unit and the cathode, allowing hard commutation of the full anode current from the thyristor structure into the gate circuit.
The integrated gate driver receives control commands and sends diagnostic feedback exclusively via optical fibers. The 650 nm optical transmission channel eliminates ground loops, insulates control systems from kilovolt-level potentials, and prevents electromagnetic interference (EMI) from corrupting trigger signals. Built-in signal validation filters out transient control glitches shorter than 400 ns, preventing accidental gate triggering during high dv/dtdv/dtdv/dt or di/dtdi/dtdi/dt events within the converter stack.
The gate unit circuit board contains monitoring circuitry that continuously evaluates internal supply voltage levels and gate-cathode status. Diagnostic signals are transmitted back to the main drive controller over the return optical link, allowing system-level fault protection before energy discharging causes hardware degradation.

5SHX0660F0002.1
Engineering Selection Highlights
- Integrated Gate Architecture: Eliminates high-inductance gate leads, maximizing turn-off current capacity and minimizing switching losses in power converter topologies.
- Fiber-Optic Isolation: Standardized 650 nm optical transmitter/receiver system provides complete electrical isolation between control electronics and high-voltage power circuits.
- Transient Signal Filtering: Built-in 400 ns glitch suppression prevents false triggering caused by steep voltage and current transients (dv/dt>20 kV/μsdv/dt > 20 kV/\musdv/dt>20 kV/μs).
- Square-Wave Power Supply Dependency: Requires high-frequency square-wave AC auxiliary power; standard sinusoidal AC supplies cannot be connected directly to the gate unit power terminal.
- Comprehensive Fault Diagnostics: Real-time optical feedback reports gate-cathode fault states and auxiliary voltage dips directly to the master controller.
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Drive Systems | ABB ACS5000 and related medium-voltage converter stacks | Matched to specific phase modules and power stack designs |
| Control Connection | 1 mm Plastic Optical Fiber (POF) or 200 µm HCS fiber | HCS fiber recommended for cable runs exceeding 15 meters |
| Minimum Fiber Bend Radius | ≥35 mm | Fiber routes must avoid sharp bends, mechanical tension, and heat sources |
| Auxiliary Power Supply | Square-wave AC supply (≥28 V start-up) | Connector X1 experiences peak current draw during gate charging sequences |
| Cooling Requirement | Forced air cooling with air velocity >0.5 m/s | Maintained airflow ensures expected capacitor operating lifetime on driver board |
Dimensions, Mounting & Connection Notes
- Mechanical Package: Press-pack disc semiconductor format integrated with external circular circuit board housing.
- Mounting Method: Clamped between heat sinks within a high-power semiconductor stack under precise mechanical clamping force.
- Optical Connectors: Standard HFBR-1528 / HFBR-2521Z optical transceivers.
- Electrical Auxiliary Terminal: Board-mounted multi-pin power connector (X1) for auxiliary gate drive supply.
- Environmental Limit Compliance: Tested for industrial vibration up to 2.5 gn2.5 g_n2.5 gn (57–150 Hz) and mechanical shocks up to 30 gn30 g_n30 gn (11 ms duration).
FAQ
What is the ABB 5SHX0660F0002.1?
The ABB 5SHX0660F0002.1 is an Integrated Gate-Commutated Thyristor (IGCT) module equipped with an integral gate driver unit, designed for high-power medium-voltage converter systems.
Which system part number corresponds to 5SHX0660F0002.1?
This module is cross-referenced under ABB system part number 3BHB018104R0001.
How is the control signal connected to the gate unit?
Control signals are transmitted optically using a 650 nm fiber-optic link with HFBR-1528/2521Z components over 1 mm POF cable (or 200 µm HCS cable for runs over 15 meters).
What type of auxiliary power is required for the gate unit?
The gate driver board requires a square-wave AC power supply with a startup voltage of at least 28 V. Sinusoidal AC power sources must not be used.
What noise protection features are integrated into the unit?
The gate unit includes a 400 ns optical glitch filter, high immunity to electromagnetic fields (up to 40 kA40 kA40 kA at 30 cm30 cm30 cm), and immunity to voltage transients exceeding 20 kV/μs20 kV/\mus20 kV/μs.
Verification & Troubleshooting Notes
- Auxiliary Voltage Faults: Verify that input voltage at connector X1 remains above the 28 V startup threshold during peak gate switching events. Voltage dips on the supply line can trigger gate unit fault state indicators.
- Optical Link Continuity: Inspect fiber optic cable connectors for dust, contamination, or tight bend radii below 35 mm if optical feedback errors occur at the main controller.
- Gate-Cathode Status Indication: Onboard optical feedback and diagnostic signals flag gate-cathode short circuits or power stage degradation to prevent energized switching under faulty conditions.
- Airflow Verification: Ensure cabinet forced-air cooling maintains an air velocity greater than 0.5 m/s across the gate driver assembly to prevent thermal stress on power supply capacitors.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626