Sale!

ABB DSAI130 57120001-P5 16-Channel Analog Input Board

The ABB DSAI130 57120001-P5 is a 16-channel differential analog input board in the ABB Advant OCS / S100 I/O product family. It converts field analog voltage and current signals into digital values for monitoring, alarm handling, calculations, and process-control logic in the connected ABB control system.

Categories: , , , , SKU: DSAI130 57120001-P5 Brand:

Description

Core Product Summary

The ABB DSAI130 57120001-P5 is a 16-channel differential analog input board in the ABB Advant OCS / S100 I/O product family. It converts field analog voltage and current signals into digital values for monitoring, alarm handling, calculations, and process-control logic in the connected ABB control system.

The board provides 16 differential inputs and supports ±10 V and ±20 mA signal ranges. Its 12-bit conversion and stated 0.025% measurement accuracy make channel configuration, controller compatibility, and common-mode-voltage conditions central selection considerations. ABB identifies the DSAI130 57120001-P as a spare part for Safeguard safety controllers and MasterPiece 2×0 systems, or for applications where the common-mode voltage exceeds 50 V; for standard process controllers with a common-mode voltage of 50 V or less, ABB directs users to the DSAI130A 3BSE018292R1.

 

Key Technical Specifications

Parameter Specification
Manufacturer ABB
Product designation DSAI130
Order / product ID 57120001-P5
Product type Analog input board
I/O family ABB S100 I/O
System family ABB Advant OCS / Advant Master
Input channels 16
Input configuration Differential
Input signal ranges ±10 V, ±20 mA
Resolution 12-bit
Stated measurement accuracy 0.025%
Board dimensions 236.7 mm height × 14.4 mm width
Net weight 0.52 kg
Documented system scope Safeguard safety controllers, MasterPiece 2×0, and applications with common-mode voltage above 50 V
Ordering requirement The hardware license number of the installed controller must be specified when ordering

 

Engineering Selection Highlights

  • The DSAI130 provides 16 differential analog input channels, so it suits applications that require separate measurement references for each field signal rather than single-ended input sharing.
  • Its documented ±10 V and ±20 mA ranges define the field-signal interface; confirm that installed transmitters and signal-conditioning devices match these ranges before selecting the board.
  • The 12-bit resolution and 0.025% stated accuracy are relevant when the control strategy depends on repeatable analog measurement within the board’s specified range.
  • ABB scopes the DSAI130 57120001-P to Safeguard safety controllers and MasterPiece 2×0 systems, or to installations with common-mode voltage above 50 V; this boundary is decisive for system fit.
  • For standard process controllers such as MasterPiece 200/1 and AC410/AC450/AC460 with common-mode voltage at or below 50 V, ABB identifies the DSAI130A 3BSE018292R1 as the applicable revitalized version.
  • The requirement to provide the installed controller’s hardware license number at ordering means the board selection should be tied to the exact controller configuration, not selected from module appearance alone.
  • The board’s 236.7 mm × 14.4 mm envelope and 0.52 kg net weight should be checked against the available S100 I/O subrack position and handling arrangements.
DSAI130 57120001-P5

DSAI130 57120001-P5

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Control-system family ABB Advant OCS with Master software; ABB S100 I/O The board is an S100 I/O analog input module rather than a standalone controller.
Safety-system compatibility Safeguard safety controllers ABB identifies the DSAI130 57120001-P as a spare part for Safeguard safety controllers.
Controller compatibility MasterPiece 2×0 The board is also specified for MasterPiece 2×0 systems.
Common-mode voltage condition Applications with common-mode voltage above 50 V This condition is part of ABB’s stated scope for the DSAI130 57120001-P.
Standard process-controller boundary MasterPiece 200/1 and AC410/AC450/AC460 with common-mode voltage at or below 50 V ABB specifies the DSAI130A 3BSE018292R1 for these configurations instead.
Ordering dependency Hardware license number of the installed controller Obtain and provide this identifier when ordering the DSAI130.
Signal interface ±10 V and ±20 mA differential inputs Field devices and loop conditioning must match the selected input range.

 

Dimensions, Mounting & Connection Notes

Item Verified information
Board height 236.7 mm
Board width 14.4 mm
Net weight 0.52 kg
Product format S100 I/O analog input board
Mounting context S100 I/O module position within the compatible ABB control-system architecture

The published product record provides the board’s physical envelope and weight but does not provide terminal assignments, wiring torque, grounding instructions, or installation clearances for this exact listing. Those installation details should be taken from the controller- and system-specific ABB documentation applicable to the installed configuration.

 

Detailed Product Overview

The ABB DSAI130 57120001-P5 is a 16-channel analog input board for ABB’s Advant OCS and S100 I/O environment. Its role is to acquire analog field signals, convert them into digital form, and pass the resulting process values to the connected controller. Because it uses differential inputs, each channel measures the voltage difference between its associated input terminals; this input arrangement is the defining electrical interface for field-device connection.

The board supports ±10 V and ±20 mA input ranges. These ranges determine which transmitters, signal converters, or loop-conditioning arrangements can be connected without additional signal adaptation. The 12-bit conversion provides the digital resolution of the measured value, while the stated 0.025% accuracy defines the board’s published measurement-performance basis. These values should be evaluated together with the controller configuration and the required measurement range rather than treated as interchangeable with other ABB analog-input board types.

System scope is particularly important for this part. ABB identifies the DSAI130 57120001-P as a spare part for Safeguard safety controllers and MasterPiece 2×0 systems, or for installations where the common-mode voltage exceeds 50 V. It further specifies that standard process controllers—MasterPiece 200/1 and AC410/AC450/AC460—with common-mode voltage at or below 50 V use the revitalized DSAI130A 3BSE018292R1. Therefore, confirming the controller type, hardware license number, and common-mode-voltage condition is a necessary part of selecting or replacing this board.

The published physical data are 236.7 mm height, 14.4 mm width, and 0.52 kg net weight. The board belongs to the S100 I/O module category and is listed across ABB control-system product structures including Advant OCS with Master software, MasterPiece 200 and 200/1, Safeguard 400 Series, 800xA I/O, and the Compact Product Suite. Ordering documentation states that the hardware license number of the installed controller must be specified when ordering the DSAI130, making controller identification an integral part of the procurement process.

 

Applications & System Role

Within an ABB Advant OCS architecture, the DSAI130 57120001-P5 functions as the analog-input interface between field instrumentation and the S100 I/O subsystem. It accepts differential voltage or current signals, converts them to digital values, and makes the resulting measurements available to the host controller for process monitoring, calculations, alarms, and control logic.

Its documented scope includes Safeguard safety controllers and MasterPiece 2×0 systems, as well as installations where the common-mode voltage exceeds 50 V. In a practical system fit, the board is appropriate where the installed controller is within that scope and the field signals can be presented as ±10 V or ±20 mA differential inputs. For a standard MasterPiece 200/1 or AC410/AC450/AC460 installation with common-mode voltage at or below 50 V, the applicable ABB product is the DSAI130A 3BSE018292R1 rather than this DSAI130 57120001-P version.

 

FAQ

What is the ABB DSAI130 57120001-P5?
It is an ABB 16-channel differential analog input board for Advant OCS / S100 I/O control-system architectures.

How many analog inputs does it provide?
The board provides 16 analog input channels.

What input signal ranges does it support?
It supports ±10 V and ±20 mA differential input signals.

What resolution and accuracy are specified?
The board uses 12-bit conversion and has a stated measurement accuracy of 0.025%.

Which ABB systems can use this board?
ABB identifies it for Safeguard safety controllers and MasterPiece 2×0 systems, or for applications where the common-mode voltage exceeds 50 V.

Can it be used with a standard MasterPiece 200/1 or AC410/AC450/AC460 controller?
For those controllers when the common-mode voltage is 50 V or less, ABB specifies the DSAI130A 3BSE018292R1 instead of the DSAI130 57120001-P.

What information is required when ordering?
The hardware license number of the installed controller must be specified when ordering the DSAI130.

What are its physical dimensions and weight?
The board measures 236.7 mm in height and 14.4 mm in width, with a net weight of 0.52 kg.