WhatsApp: +86 16626708626
Email: 
Phone: +86 16626708626Description
Key Technical Specifications
- Manufacturer: ABB
- Model: GLB0201
- Original part number: GLB 0201
- Application: KBA Colora
- Product type: Power board
- Dimensions: 23.5 cm x 16.5 cm x 5 cm
- Weight: 0.92 kg
- Installation context: Machine power supply and control board
- Market status: Legacy spare part, limited availability
Product Introduction
ABB GLB0201 is a power board used in KBA Colora equipment. It is a machine-level ABB spare part intended for power and control functions inside the original system.
This part is usually purchased to keep legacy printing or production equipment running without changing the original control layout. Verify the exact machine variant and board revision before ordering, because GLB-series listings are often sparse and seller descriptions can be incomplete.
Troubleshooting Quick Reference
| Symptom | Possible Cause | Relevance to This Part | Quick Check Method | Recommendation |
|---|---|---|---|---|
| Board appears dead | No upstream supply or blown fuse | ✅ High | Measure input voltage and check cabinet fuses | Verify supply path before replacing the board |
| Machine will not power up | Power board fault or interlock issue | ✅ High | Check status LEDs and interlock chain | Confirm interlocks and power rails first |
| Intermittent shutdowns | Loose connector or unstable supply | ✅ High | Inspect connectors and monitor supply under load | Re-seat connectors and test power stability |
| Overheating | Poor ventilation or overloaded supply stage | ⚠️ Medium | Measure board and cabinet temperature | Fix cooling and load issues before replacement |
| Unusual noise or smell | Component failure on the board | ✅ High | Inspect visually for burn marks or damaged parts | Replace the board and check for downstream faults |
| Adjacent modules also fail | Main machine supply or backplane issue | ❌ Low | Test the main supply and neighboring boards | Isolate the broader machine fault first |
If the fault is still unclear, contact technical support with photos, wiring details, and diagnostic logs.
- GLB0201
- GLB0201
Frequently Asked Questions
Q: What is ABB GLB0201 used for?
A: It is a power board used in KBA Colora equipment. In practice, it supports the machine’s power and control functions.
Q: Is GLB0201 still available new?
A: Sometimes, but it is usually a legacy spare with limited stock. Most buyers source it from surplus or secondary-market inventory.
Q: Is it a direct replacement for every ABB GLB board?
A: No. Match the exact part number, machine model, and board revision before ordering. A close-looking board can still be wrong.
Q: Can I install it live?
A: I would not. Power down first unless the OEM manual for your exact machine explicitly allows live replacement.
Q: Why is it cheaper than factory new?
A: Because it is often new surplus or secondary-market stock, not factory-direct production. Lower price is normal, but condition should be stated clearly.
Q: What condition should I expect?
A: The honest descriptions are New Original, New Surplus, or Refurbished (tested). If the listing is vague, ask for board photos and test proof.
Q: What usually causes “bad board” symptoms that are really site issues?
A: Power instability, blown fuses, loose connectors, and machine interlock problems are the common ones. Check those first before replacing the board.
