Sale!

ABB PM864A AC 800M Processor Unit for System 800xA

The ABB PM864A is a processor unit for the ABB AC 800M controller family and ABB System 800xA automation environment. It executes the controller application, manages communication with I/O and network interfaces, and supports redundant CPU operation in suitable AC 800M configurations.

Categories: , , , , SKU: PM864A Brand:

Description

Core Product Summary

The ABB PM864A is a processor unit for the ABB AC 800M controller family and ABB System 800xA automation environment. It executes the controller application, manages communication with I/O and network interfaces, and supports redundant CPU operation in suitable AC 800M configurations.

The PM864A is supplied as the PM864AK01 processor-unit package, order number 3BSE018161R1. The package includes the PM864A CPU, TP830 baseplate, CEX-Bus terminator, ModuleBus terminator, RCU-Link terminator, memory-backup battery, and power plug. The controller provides two RJ45 Ethernet ports, two serial interfaces, ModuleBus connectivity, and a CEX-Bus interface for communication and I/O expansion.

 

Key Technical Specifications

Attribute Specification
Manufacturer ABB
Product type Processor unit / controller CPU
Controller family ABB AC 800M
System platform ABB System 800xA
Model designation PM864A
Package designation PM864AK01
Order number 3BSE018161R1
CPU clock frequency 96 MHz
Memory size 32 MB
Real-time clock Battery-backed real-time clock
Storage interface CompactFlash interface
Ethernet ports Two RJ45 Ethernet ports
Serial interfaces Two RJ45 serial interfaces: COM3 RS-232C and COM4 isolated serial
ModuleBus I/O capacity Up to 96 I/O modules in single-CPU configuration
ModuleBus I/O capacity, redundant CPU Up to 84 I/O modules
ModuleBus scan rate 0–100 ms, depending on the number of I/O modules
Communication interfaces Ethernet, ModuleBus, CEX-Bus; fieldbus interfaces available through CEX-Bus modules
Redundancy Controller redundancy supported
High Integrity Not supported
Nominal supply voltage 24 V DC
Supply-voltage range 19.2–30 V DC
Current consumption 287 mA typical; 487 mA maximum, excluding ModuleBus and CEX-Bus supply
Power-input connector Four-pin screw connector: L+, L−, SA, and SB
Baseplate TP830, 115 mm width
Package weight 1.2 kg
Configuration software ABB Control Builder

 

Engineering Selection Highlights

  • The PM864A is an AC 800M processor unit, so it is selected when the installed control application is based on ABB’s AC 800M controller architecture and System 800xA.
  • Its 96 MHz processor and 32 MB memory define the controller’s processing and application-memory platform; these values should be checked against the requirements of the existing application.
  • The controller provides two RJ45 Ethernet ports, supporting Ethernet-based control-network connectivity.
  • Its ModuleBus interface connects AC 800M I/O; ABB specifies up to 96 I/O modules for a single PM864A and up to 84 I/O modules in a redundant-CPU configuration.
  • The CEX-Bus interface accommodates communication modules, allowing protocols and interfaces such as PROFIBUS DP, FOUNDATION Fieldbus, Modbus TCP, PROFINET IO, EtherNet/IP, and IEC 61850 to be added through the appropriate CI8xx modules.
  • The PM864A supports redundant CPU operation, but its electrical ModuleBus cannot be used when the controller operates in redundant-CPU configuration.
  • The PM864AK01 package includes the TP830 baseplate, bus terminators, battery, and power plug; these components are relevant when replacing a complete processor-unit assembly rather than only the CPU board.
PM864A

PM864A

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Controller platform ABB AC 800M The PM864A is an AC 800M processor unit.
System platform ABB System 800xA The controller is used within the ABB System 800xA automation environment.
Baseplate TP830 The PM864A is supplied with a TP830 baseplate, which is 115 mm wide.
Ethernet control network Two RJ45 Ethernet ports The controller connects to the control network through its Ethernet ports.
Local I/O ModuleBus The PM864A connects to AC 800M I/O through ModuleBus.
Electrical ModuleBus in redundancy Not usable in redundant-CPU configuration ABB states that the electrical ModuleBus cannot be used when the controller runs in redundant-CPU configuration.
Communication expansion CEX-Bus Communication interfaces are added through CEX-Bus modules.
Supported communication interfaces CI851, CI852, CI853, CI854/CI854A, CI855, CI856, CI857, CI858, CI860, CI862, CI865, CI867, CI868, CI869, CI871, CI872, and CI873 These CEX-Bus interface modules are documented for the AC 800M system.
S100 I/O integration CI856 interface The CI856 provides the documented interface path for S100 I/O.
Engineering configuration Control Builder The controller is configured through ABB Control Builder.
Memory backup Internal battery; SB821 or SB822 external battery units The PM864A supports battery-backed memory retention, with external battery options documented by ABB.

 

Dimensions, Mounting & Connection Notes

The PM864A is mounted on the TP830 baseplate, which has a width of 115 mm. The complete PM864AK01 processor-unit package weighs 1.2 kg. The processor unit is installed in an AC 800M cabinet arrangement and connects to the CEX-Bus, ModuleBus, Ethernet network, serial interfaces, and 24 V DC supply through its baseplate and front-panel connections.

The controller requires a 24 V nominal DC supply, with an allowable variation of 19.2–30 V DC. Its four-pin screw power connector provides L+, L−, SA, and SB terminals. ABB specifies 287 mA typical and 487 mA maximum current consumption for the processor unit, excluding the supply consumed by ModuleBus and CEX-Bus devices.

For single-CPU operation, the RCU Link termination plug TB852 must be installed at the RCU Link connector. In a redundant configuration, the RCU Link Cable TK851 is required. ABB also specifies that CEX-Bus baseplates must not be manipulated while the system is powered and running.

 

Detailed Product Overview

The ABB PM864A is a processor unit in the AC 800M controller family. It is the execution and coordination center of the controller: it runs the application program, manages communication with I/O and network interfaces, and provides the processing platform for control functions within ABB System 800xA.

The PM864A uses a 96 MHz processor and 32 MB of memory. Its CPU board includes the microprocessor, RAM, battery-backed real-time clock, LED indicators, INIT push button, and CompactFlash interface. These features support controller operation, application storage and transfer, time stamping, status indication, and system initialization.

For communication, the PM864A provides two RJ45 Ethernet ports, two RJ45 serial interfaces, ModuleBus, and CEX-Bus. The Ethernet ports provide the controller’s connection to the control network. The serial interfaces provide COM3 RS-232C and an isolated COM4 serial channel. ModuleBus connects AC 800M I/O modules, while the CEX-Bus accommodates communication interface modules.

ABB specifies a ModuleBus I/O capacity of up to 96 I/O modules for a single PM864A and up to 84 I/O modules when the controller is configured for CPU redundancy. The ModuleBus scan rate is 0–100 ms, with the actual time dependent on the number of connected I/O modules. In a redundant-CPU configuration, the electrical ModuleBus cannot be used; this is an important distinction when planning an existing or replacement controller architecture.

The PM864A is supplied as the PM864AK01 package, order number 3BSE018161R1. In addition to the PM864A CPU, the package includes the TP830 baseplate, TB850 CEX-Bus terminator, TB807 ModuleBus terminator, TB852 RCU-Link terminator, memory-backup battery, and power plug. These components should be considered when replacing a processor-unit assembly, because the baseplate and termination components are integral to the controller’s installation and communication arrangement.

The controller is powered from 24 V nominal DC, with an input range of 19.2–30 V DC. Its power connector provides L+, L−, SA, and SB terminals. ABB specifies 287 mA typical and 487 mA maximum current consumption, excluding the supply required by ModuleBus and CEX-Bus devices. The controller supports memory backup through its internal battery and through the SB821 or SB822 external battery units.

 

Applications & System Role

The PM864A is the central processing unit in an AC 800M control system. It runs the control application, coordinates communication between the controller, I/O modules, communication interfaces, and the System 800xA environment, and provides the processing platform for control logic, sequencing, alarm handling, and process supervision.

Its ModuleBus interface serves locally connected AC 800M I/O, while the CEX-Bus interface provides the expansion path for communication modules and additional I/O interfaces. The two Ethernet ports support connection to the control network, and the controller’s redundancy capability allows it to be used in AC 800M configurations where a backup processor unit is required.

 

FAQ

What is the ABB PM864A?
The ABB PM864A is a processor unit for the ABB AC 800M controller family, used to execute control applications and coordinate communication within ABB System 800xA.

What is the order number for the PM864A?
The PM864AK01 processor-unit package has order number 3BSE018161R1.

Which ABB system family does the PM864A belong to?
It belongs to the ABB AC 800M controller family and is used in ABB System 800xA automation systems.

What processor and memory does the PM864A provide?
The PM864A provides a 96 MHz processor and 32 MB of memory.

How many Ethernet ports does the PM864A have?
The controller has two RJ45 Ethernet ports.

Which I/O interfaces does the PM864A support?
It supports ModuleBus for AC 800M I/O and CEX-Bus for communication and I/O interface modules.

How many I/O modules can the PM864A support?
ABB specifies up to 96 I/O modules in a single-CPU configuration and up to 84 I/O modules in a redundant-CPU configuration.

Does the PM864A support controller redundancy?
Yes. The PM864A supports redundant CPU operation in suitable AC 800M configurations.

What power supply does the PM864A require?
It requires a 24 V nominal DC supply, with an allowable range of 19.2–30 V DC.

What is included in the PM864AK01 package?
The package includes the PM864A CPU, TP830 baseplate, CEX-Bus terminator, ModuleBus terminator, RCU-Link terminator, memory-backup battery, and power plug.