Description
Core Product Summary
The ABB SCM/S 1.1 is an ABB i-bus KNX security module for modular DIN-rail installation. It functions as a central logic device for security and monitoring systems, evaluating detector signals and managing arming, alarm, reset, and status functions.
The module evaluates up to 64 detectors or detector groups and provides a freely programmable floating relay output for signaling devices. It is supplied through the KNX bus at 21–30 VDC, mounts on a 35 mm rail, and is configured with the ETS engineering tool software.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Manufacturer | ABB |
| Model | SCM/S 1.1 |
| Order number | 2CDG 110 024 R0011 |
| Product type | Security module |
| System | ABB i-bus KNX / EIB |
| Installation type | Modular DIN-rail device, MDRC |
| Mounting width | 2 modules, 18 mm each |
| Detectors / zones | Up to 64 detectors or detector groups |
| Communication objects | 64 detector objects |
| Event memory | 250 entries |
| Operating voltage | 21–30 VDC via EIB / KNX bus |
| Maximum current consumption | 10 mA |
| Relay output | 1 floating contact |
| Relay switching voltage | 0–230 VAC/DC |
| Relay switching current | 6 A, AC1 |
| Status indication | Three LEDs |
| Internal sounder | Freely controllable buzzer |
| Degree of protection | IP20 to EN 60529 |
| Operating temperature | -5 to +45°C |
| Storage temperature | -25 to +55°C |
| Transport temperature | -25 to +70°C |
| Dimensions | 90 × 36 × 64 mm (H × W × D) |
| Weight | 0.1 kg |
| Configuration software | ETS; device application Security Slave/2.1 |
Engineering Selection Highlights
- The SCM/S 1.1 is a KNX security logic module, not a detector, power supply, or alarm sounder; it links and manages KNX security devices.
- Its 64-detector capacity defines the practical scale of the security or monitoring system it can coordinate.
- The floating relay output can be programmed for signaling functions such as a fault or alarm indication.
- KNX bus supply at 21–30 VDC removes the need for a separate module supply, but the bus power budget must include the module’s 10 mA maximum consumption.
- ETS configuration is required for physical addressing, parameters, and application setup.
- The 2-module, 35 mm DIN-rail format allows installation in distribution boards or small enclosures.
- The module is documented for small to medium-sized installations without VdS requirements, so the applicable security standard should be checked for the intended installation.
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Bus system | ABB i-bus KNX / EIB | Connect through the included bus connection terminal. |
| Configuration software | ETS, from version ETS2 V1.2 | Used for physical-address assignment and parameter configuration. |
| Device application | Security Slave/2.1 | This application controls the module’s security functions. |
| Detectors | Up to 64 detectors or detector groups | Detector status is evaluated through KNX communication objects. |
| Operator interface | Bus-capable LCD display, such as a room panel | Can be used for arming, operation, and display functions. |
| Signaling device | Floating relay output | Connect an appropriate signaling device within the relay contact rating. |
| Mounting rail | 35 mm rail to EN 60715 | Suitable for distribution boards and small enclosures. |

SCM/S 1.1

SCM/S 1.1
Dimensions, Mounting & Connection Notes
- Housing dimensions: 90 mm height × 36 mm width × 64 mm depth.
- Mounting width: 2 modules, each 18 mm wide.
- Mounting method: quick mounting on a 35 mm DIN rail according to EN 60715.
- Mounting position: any orientation.
- Weight: 0.1 kg.
- KNX connection: bus connection terminal, included with the device.
- Relay output: one floating contact on two screw terminals.
- Terminal wire sizes: 0.2–2.5 mm² for fine-stranded conductors; 0.2–4 mm² for solid conductors.
- Degree of protection: IP20 to EN 60529.
Detailed Product Overview
The ABB SCM/S 1.1 is an i-bus KNX security module designed to provide central logic for security and monitoring functions in KNX installations. It is a two-module DIN-rail device that connects directly to the KNX bus through the supplied bus connection terminal.
The module evaluates up to 64 detectors or detector groups. These may include motion detectors, window and door contacts, and other KNX-connected detection devices. Rather than acting as a detector itself, the SCM/S 1.1 combines detector states into security logic, including arming and disarming, alarm activation, reset behavior, detector-group monitoring, and sabotage monitoring.
Status information is available through three front-panel LEDs and through KNX status messages. Important events can also be transmitted as 14-byte text messages. The module maintains an event list memory of 250 entries, allowing security events to be traced after they occur.
A freely programmable floating relay output is provided for signaling. It is rated for 0–230 VAC/DC switching voltage and 6 A AC1 switching current. Typical uses include connection to an external signaling device or generation of a fault indication such as a bus-voltage failure. The module also includes a freely controllable internal buzzer for local audible indication.
The SCM/S 1.1 is powered from the KNX bus at 21–30 VDC and consumes up to 10 mA. Configuration is performed in ETS using the Security Slave/2.1 device application. Physical-address assignment and parameter settings are made through ETS, beginning with ETS2 version V1.2.
The module is documented for small to medium-sized installations without VdS requirements, including residential, administrative, and industrial buildings. For installations where a specific security certification or insurer requirement applies, the suitability of a KNX-based security architecture should be assessed against that requirement.
Applications & System Role
The SCM/S 1.1 acts as the central logic device in an ABB i-bus KNX security and monitoring system. It links detector signals from devices such as motion detectors and door or window contacts into coordinated security functions.
The module manages arming and disarming, alarm and reset logic, detector-group monitoring, sabotage monitoring, and event history. Its relay output can signal an alarm, fault, or other programmed condition to an external device, while its internal buzzer provides local audible indication.
FAQ
What is the ABB SCM/S 1.1?
It is an ABB i-bus KNX security module that provides central logic for security and monitoring functions in KNX installations.
How many detectors can the SCM/S 1.1 evaluate?
It can evaluate up to 64 detectors or detector groups.
What type of output does it provide?
It provides one freely programmable floating relay contact, rated for 0–230 VAC/DC and 6 A AC1.
How is the SCM/S 1.1 powered?
It is powered through the KNX bus at 21–30 VDC and consumes up to 10 mA.
Which software is used to configure it?
The module is configured with ETS using the Security Slave/2.1 device application.
How is it mounted?
It mounts on a 35 mm DIN rail according to EN 60715 and occupies two 18 mm module widths.
Does it include local indication?
Yes. It has three status LEDs and a freely controllable internal buzzer.
What is its event-memory capacity?
The module stores up to 250 events in its event list memory.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626