Sale!

ALSTOM L54E1100EC00 SIL4 Rail Safety Interlocking Card

  • Model: L54E1100EC00
  • Brand: ALSTOM
  • Series: ESVI / Signaling Interlocking System
  • Core Function: Controls vital trackside signaling I/O and communication with SIL4 safety integrity.
  • Product Type: Vital Safety I/O & Communication Module
  • Key Specs: SIL4 Certified (EN 50128/50129) | 24 Vital Inputs / 12 Relay Outputs | 6U VME Bus Interface
  • Condition: New Original / New Surplus
  • Inventory Status: Legacy / Discontinued OEM component — critical strategic buffer stock required for railway signaling asset management.
Categories: , , , , SKU: L54E1100EC00 Brand:

Description

Key Technical Specifications

Parameter Specification / Value
Model Number / Part Number L54E1100EC00
Manufacturer ALSTOM Signaling
Safety Integrity Level SIL4 (EN 50128 / EN 50129 compliant)
Form Factor 6U Single-Width VME Card
Operating Voltage 24 V DC (±10%)
Power Consumption 24 W maximum
Vital Analog Inputs 24 Galvanically Isolated Input Channels
Fail-Safe Relay Outputs 12 Safety Relay Output Channels
Isolation Voltage 2500 V AC between field circuits and VME backplane
System Self-Test Cycle 10 ms deterministic full-channel diagnostic cycle
Fault Detection Response ≤ 20 ms de-energization response
Operating Temperature −20 °C to +70 °C (−4 °F to +158 °F)
PCB Protective Coating Acrylic conformal coating (IP30 internal cabinet rating)

 

Product Introduction & Supply Chain Strategy

The ALSTOM L54E1100EC00 is a SIL4 fail-safe safety I/O and communication card designed for railway station interlocking, trackside signaling, and metro control systems. Utilizing a 6U VME backplane architecture, it processes 24 vital inputs and 12 fail-safe relay output channels with continuous 10 ms diagnostic self-testing. Any single component fault triggers automatic hardware de-energization to prevent unsafe signal states.

Because railway authorities face stringent safety validation rules when updating signaling infrastructure, replacing discontinued cards with non-identical hardware requires lengthy re-certification processes. Acquiring genuine New Surplus L54E1100EC00 modules avoids costly system redesigns. Furthermore, avoiding second-hand or refurbished safety cards removes hidden risks like degraded optocouplers or relay contact fatigue. Keeping 1–2 New Surplus cards on-site as buffer stock provides immediate replacement capability while maintaining 100% SIL4 compliance.

L54E1100EC00

L54E1100EC00

L54E1100EC00

L54E1100EC00

Installation & Configuration Guide

Critical Rail Safety & High Voltage Warning

Safety-critical interlocking systems control live rail traffic. Interlocking logic outputs must be fully isolated before servicing. Ensure complete LOTO (Lock-Out/Tag-Out) on field power supplies and field relay circuits before inserting or removing any VME module.

1.Pre-Installation & ESD Preparation:5 mins.

Verify cabinet de-energization and perform LOTO on 24 V DC power feeds. Wear a grounded ESD wrist strap connected to the rack frame ground. Record front panel wire assignments and terminal block configurations.

2.Demounting Legacy Card:10 mins.

Unscrew top and bottom front panel retention screws. Carefully unlatch the ejector handles to unseat the card from the 6U VME backplane connector, taking care not to bend pin contacts. Pull straight forward out of the card guide rails.

3.Card Insertion & Hardware Alignment:10 mins.

Inspect the rear DIN/VME connectors on the new L54E1100EC00 card for pristine pin alignment. Slide the module firmly along the VME guide rails until the backplane contacts engage. Firmly lock top and bottom ejector handles and tighten retention screws.

4.Wiring Verification & Diagnostic Self-Test:15 mins.

Reconnect field wiring connectors to front terminal blocks (torque screws to 0.6 N·m max). Restore 24 V DC logic power. Observe front panel LED indicators: verify system run status LEDs display GREEN with no red fault alarms after the 10 ms initialization self-test cycle.

Verification: The main interlocking rack CPU must recognize the L54E1100EC00 on the VME bus without communication fault flags. All vital input/output status LEDs must mirror physical field relay positions correctly.

 

Firmware/Software Versions & Upgrade Notes

  • System Compatibility: Designed for ALSTOM signaling racks and ESVI interlocking hardware platforms. Fully backward compatible with legacy L54E1100-series chassis setups.
  • Logic Download: Fail-safe application parameters reside in the primary interlocking controller CPU or local EEPROM key modules. Hardware swapping of the L54E1100EC00 requires no field firmware flashing.
  • Channel Configuration Rules: The L54E1100EC00 functions as an expanded-density channel module. Ensure system configuration files in the master interlocking rack match the expanded 24-input / 12-output channel map to avoid I/O addressing mismatches during POST.

 

Frequently Asked Questions (FAQ)

Is this ALSTOM L54E1100EC00 safety card brand new or refurbished?

This module is Brand New Surplus. It is not a pulled card, second-hand unit, or refurbished board. It features factory-original components, pristine gold-plated edge connectors, and un-degraded silver alloy safety relays.

Why are refurbished safety cards dangerous in rail signaling applications?

Refurbished signaling cards carry hidden risks such as contact resistance degradation on safety relays, thermal degradation of optocouplers, and microscopic solder fractures. A relay contact failure in a rail interlocking system can lead to false-clear signal indications or un-cleared field faults, creating unacceptable safety hazards and line disruptions.

What safety certification level does this card support?

The L54E1100EC00 card meets SIL4 (Safety Integrity Level 4) requirements under EN 50128 and EN 50129 railway safety standards.

Does this card require special cooling inside trackside enclosures?

The card operates between −20 °C and +70 °C. However, for enclosures operating at sustained ambient temperatures above 50 °C, forced air ventilation within the IP54 control cabinet is recommended to maximize relay operational life.

What warranty is included with this New Surplus card?

Every New Surplus ALSTOM L54E1100EC00 card is covered by a standard 12-Month Replacement Warranty. Units pass strict physical and electrical inspections—including insulation resistance, power-on self-test cycles, and backplane bus checks—prior to ESD-safe packaging and shipment.