Sale!

ALSTOM UT150-1 ALSPA CE2000 Field Processing Unit

Parameter Specification
Model Number UT150-1
Manufacturer ALSTOM
Product Family ALSPA Series / CE2000 Field Controller
Module Type Main Processing Unit / Field Control Board
Fieldbus Protocol WorldFIP
Communication Speed 1 Mbps (WorldFIP Copper Medium)
System Network Integration F8000 DCS Network Architecture
Maximum I/O Module Capacity Up to 16 I/O expansion modules per rack assembly
Primary Host Controller ALSTOM CE2000 Controller Series
Categories: , , , , Brand:

Description

Core Product Summary (Brand / Model / Key Attributes)

The ALSTOM UT150-1 is a central processing and control unit designed for the ALSTOM ALSPA CE2000 field controller platform. Functioning within distributed control systems (DCS), the UT150-1 acts as a primary processing bridge, linking field-level CE2000 controller racks to higher-level F8000 industrial networks over WorldFIP communication media.

As part of the ALSPA automation system, the UT150-1 module manages localized control algorithms, executes input/output data scanning, and maintains real-time deterministic communication across the field bus architecture. Designed to support up to 16 expansion I/O modules per node, it handles high-density sensor processing, closed-loop control tasks, and diagnostic reporting for power generation, chemical processing, and heavy industrial plant control.

 

Key Technical Specifications

Parameter Specification
Model Number UT150-1
Manufacturer ALSTOM
Product Family ALSPA Series / CE2000 Field Controller
Module Type Main Processing Unit / Field Control Board
Fieldbus Protocol WorldFIP
Communication Speed 1 Mbps (WorldFIP Copper Medium)
System Network Integration F8000 DCS Network Architecture
Maximum I/O Module Capacity Up to 16 I/O expansion modules per rack assembly
Primary Host Controller ALSTOM CE2000 Controller Series

 

Detailed Product Overview

The ALSTOM UT150-1 processing unit forms a core control element in ALSTOM’s ALSPA distributed control system architecture, specifically engineered to interface with the CE2000 field controller family. In large-scale process automation—such as thermal power plants, hydroelectric stations, and petrochemical facilities—the UT150-1 operates at the field level to ensure continuous, low-latency control execution.

The primary function of the UT150-1 is to serve as an intelligent data communication and processing bridge between CE2000 I/O subsystems and the broader F8000 control network. Operating on a WorldFIP copper bus at 1 Mbps, the card manages cyclic and acyclic data exchanges, ensuring deterministic synchronism between local control loops and central supervisory systems.

Equipped with processing hardware to run control logic and handle up to 16 digital and analog I/O modules, the UT150-1 reduces the processing load on main plant servers by managing field acquisition, signal scaling, and alarm monitoring locally. Non-volatile internal memory retains system configuration parameters and diagnostic data, maintaining operational integrity through power cycles.

UT150-1

UT150-1

UT150-1

UT150-1

Engineering Selection Highlights

  • Native CE2000 Integration → Built specifically to control and interface with ALSTOM CE2000 field controllers without requiring third-party protocol converters.
  • 1 Mbps WorldFIP Network Interface → Enables high-speed, deterministic data transmission to F8000 network backbones over shielded copper media.
  • High Subsystem I/O Capacity → Coordinates up to 16 I/O expansion modules, allowing high-density signal consolidation in a single control rack.
  • Distributed Processing Architecture → Executes local control logic and protocol translation at the field rack level, reducing network traffic and latency to supervisory controllers.

 

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
System Architecture ALSTOM ALSPA DCS Platform Integrates into ALSPA series automation architectures.
Field Controller ALSTOM CE2000 Series Functions as the central processing unit for CE2000 controller racks.
Network Backbone F8000 Network System Connects field racks directly to the F8000 system network.
Physical Network Medium WorldFIP Shielded Copper Bus Operates over 1 Mbps WorldFIP copper bus media.
Expansion Capacity Up to 16 I/O Modules Manages addressing and data scan cycles for up to 16 local I/O cards.

 

Dimensions, Mounting & Connection Notes

  • Form Factor: Standard plug-in circuit board module designed for insertion into ALSPA / CE2000 rack sub-racks.
  • Mounting: Card-guide alignment into dedicated controller rack slots; faceplate mounting screws lock the card against vibration.
  • Network Connection: Front-panel WorldFIP bus connector for shielded twin-axial / twisted-pair copper cabling runs.
  • ESD Handling: Static-sensitive electronics. Maintain proper grounding precautions and wear an anti-static wrist strap during module installation or extraction.

 

FAQ

What is the ALSTOM UT150-1?

The ALSTOM UT150-1 is a field processing unit designed to control the ALSTOM CE2000 field controller and manage communications within the ALSPA DCS system.

Which fieldbus protocol does the UT150-1 use?

The module utilizes the WorldFIP communication protocol running over copper medium at a data rate of 1 Mbps.

Which controller family does the UT150-1 integrate with?

It is designed specifically for use with the ALSTOM CE2000 series field controllers and connects to the F8000 DCS network.

How many I/O modules can a single UT150-1 unit manage?

A single UT150-1 processing unit can manage up to 16 input/output expansion modules.

 

Verification & Troubleshooting Notes

DCS Power Off Safety Notice

Always shut off control rack power before inserting or removing the UT150-1 module. Hot-swapping backplane cards without proper system configuration can disrupt active WorldFIP bus communication loops and cause unexpected system trips.

1.Inspect Card Seating and Power Input:Physical verification.

Ensure the UT150-1 module is pushed fully into the CE2000 rack backplane slot and faceplate retaining hardware is secured. Apply power to the rack.

Verification: The green POWER / RUN status LED on the front panel illuminates steadily.

2.Verify WorldFIP Bus Activity:Network check.

Check the WorldFIP communication cable connections on the front faceplate. Monitor the TX/RX activity LEDs.

Verification: Communication status indicators flash steadily, confirming active data frame exchange with the F8000 network.

3.Confirm Rack I/O Addressing:Diagnostic check.

Connect to the CE2000 system engineering workstation and run a node scan across the 16 connected I/O slots.

Verification: The workstation reports all attached I/O modules online without address conflicts or bus timeout errors.