Description
Core Product Summary
The AMAT 0100-20207 is an Applied Materials direct-drive robot interface printed circuit board assembly (PCBA). It provides the interface between the equipment control system and the direct-drive wafer-handling robot in semiconductor manufacturing equipment.
This board is identified as a robot-interface PCB assembly rather than a complete robot controller. It is used to support signal communication and control-interface functions between the main system controller and the direct-drive robot, making correct board revision and equipment configuration important factors during replacement or service.
Key Technical Specifications
| Specification | Value |
|---|---|
| Brand | Applied Materials (AMAT) |
| Exact part number | 0100-20207 |
| Product type | Printed circuit board assembly (PCBA) |
| Board function | Direct-drive robot interface |
| System role | Interface between system controller and wafer-handling direct-drive robot |
| Application context | Semiconductor wafer-processing equipment |
| Board designation | PCB ASSY ROBOT INTERFACE |
| Related board reference | 0130-20207 Rev A |
| Replacement verification | Confirm part number, revision, connector layout, and equipment configuration before installation |
Engineering Selection Highlights
- The AMAT 0100-20207 is specifically identified as a direct-drive robot interface board, so it should not be treated as a general-purpose robot controller or drive.
- The board provides the interface path between the equipment’s main controller and the direct-drive wafer-handling robot.
- The exact part number 0100-20207 should be matched to the installed board label and the equipment spare-parts documentation before ordering.
- The related reference 0130-20207 Rev A is associated with this board; revision and assembly markings should be verified before substitution.
- The PCB assembly is intended for semiconductor wafer-processing equipment, where it supports robot control and communication functions within the equipment architecture.
- Connector layout, firmware or controller configuration, and wiring compatibility should be confirmed from the equipment’s service documentation before installation.
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Equipment platform | Applied Materials semiconductor wafer-processing equipment | The board is an AMAT equipment-specific spare part. |
| Robot type | Direct-drive wafer-handling robot | The board is designated for the direct-drive robot interface function. |
| Control system | Equipment main controller | The board interfaces the main controller with the robot. |
| Board identity | Part number 0100-20207 | Verify the number and revision marked on the installed assembly. |
| Related assembly reference | 0130-20207 Rev A | Confirm the revision and assembly reference against the installed board and equipment documentation. |
| Installation | Original equipment control architecture | Connector positions, wiring, and controller configuration must match the installed system. |
Detailed Product Overview
The Applied Materials 0100-20207 is a direct-drive robot interface printed circuit board assembly used in semiconductor wafer-processing equipment. It is identified in AMAT parts documentation and supplier records as a “PCB ASSY ROBOT INTERFACE,” with the functional designation “Direct Drive Robot Interface Board.”
The board’s role is to provide the interface between the equipment’s main controller and the direct-drive wafer-handling robot. In a wafer-processing tool, the robot moves wafers between process chambers, load locks, and other equipment locations. The interface board supports the control and signal path required for that robot to operate as part of the overall equipment control system.
The 0100-20207 is a PCB assembly, not a complete robot-control system. It does not replace the robot, robot drive, main controller, or associated cabling. Instead, it serves as the interface element that connects the controller-side control architecture with the direct-drive robot-side electronics.
The related reference 0130-20207 Rev A is associated with this assembly. This reference should be treated as an important identification detail because PCB revisions, connector layouts, and equipment configurations can differ. Before installing or replacing the board, the installed part number, revision marking, connector layout, and equipment service documentation should be checked.
The AMAT 0100-20207 is appropriate for maintenance and spare-parts planning in Applied Materials wafer-processing tools that use a direct-drive robot interface architecture. Its correct application depends on matching the exact board identity and the installed robot and controller configuration.

0100-20207
Applications & System Role
The AMAT 0100-20207 sits in the motion-control and wafer-handling portion of a semiconductor manufacturing tool. Its function is to provide the interface needed for the equipment control system to communicate with and control a direct-drive wafer-handling robot.
In this role, the board supports the exchange of control and status signals between the system controller and the robot electronics. It is part of the equipment’s robot-control architecture, helping enable wafer handling and positioning within the processing tool.
Because it is an equipment-specific interface assembly, its use is tied to the original Applied Materials control architecture and the direct-drive robot configuration in the installed tool. It is not a standalone motion controller, servo drive, or robot power supply.
FAQ
What is the AMAT 0100-20207?
It is an Applied Materials direct-drive robot interface printed circuit board assembly for semiconductor wafer-processing equipment.
What does the 0100-20207 do?
It provides the interface between the equipment main controller and the direct-drive wafer-handling robot.
Is the AMAT 0100-20207 a robot controller?
No. It is a robot-interface PCB assembly, not a complete robot controller or servo drive.
Which type of robot does it support?
It is designated for a direct-drive wafer-handling robot.
What equipment type uses this board?
It is used in Applied Materials semiconductor wafer-processing equipment.
What related board reference is associated with 0100-20207?
The related reference is 0130-20207 Rev A.
What should be checked before replacing this board?
Confirm the installed part number, board revision, connector layout, equipment configuration, and controller compatibility before replacement.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626