Description
Core Product Summary (Brand / Model / Key Attributes)
The ASML 386P 4022 226 2390 (also formatted as 4022-226-2390 or 40222262390) is a central processor module board (CENTR PROC 386P / CPU 386P) used in industrial control and lithography/automation equipment. Built on the 12NC (4022 xxx xxxxx) hardware numbering heritage shared across Philips and ASML industrial electronics, the board serves as a central processing circuit card within compatible control racks or chassis.
Because exact system configuration, firmware/EPROM revisions, and backplane bus compatibility depend on the host equipment build, buyers and maintenance engineers should confirm the exact part number, revision markings, and host system bill of materials (BOM) prior to installation.
Key Technical Specifications
| Parameter | Specification |
| Brand / System Context | ASML (12NC hardware numbering format) |
| Exact Part / Order Designation | 386P 4022 226 2390 (4022-226-2390 / 40222262390) |
| Module Type | Central Processor Module Board (CENTR PROC 386P / CPU 386P) |
| Processor Class | 386P processor architecture |
| Form Factor | Printed circuit board (PCB) module |
Detailed Product Overview
The ASML 386P 4022 226 2390 is a processor-level printed circuit board assembly designated as a central processor (386P CPU board). In multi-board industrial and semiconductor control systems, a central processor board executes supervisory or control logic, manages system bus exchanges with companion I/O and interface cards, and coordinates local subsystem operation.
Part numbers following the 4022 xxx xxxxx structure originate from the Philips 12NC component numbering convention widely present across industrial automation and ASML equipment assemblies. When handling or replacing a 4022 226 2390 board, verifying exact physical card geometry, edge or backplane connectors, jumper/DIP switch settings, and system-specific firmware or memory configurations is critical so the replacement board matches the host chassis requirements.

386P 4022 226 2390
Engineering Selection Highlights
- Exact Processor Board Identification (
386P/4022 226 2390) → Matches the specific386Pcentral processor module number rather than generic I/O, power, or memory cards within the same control rack. - 12NC Numbering Alignment (
4022-226-2390/40222262390) → Helps cross-check spare-parts records and equipment BOMs where spacing, hyphens, or compact digit strings are used. - System-Specific Configuration Sensitivity → Requires matching host equipment compatibility, card slot placement, and configuration/firmware state before putting the board into service.
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
| Host Equipment & Rack Slot | Compatible 386P processor slot/chassis in target industrial/ASML equipment |
Confirm exact machine model, rack bay position, and BOM approval before installation. |
| Board Configuration & Firmware | System-specific settings and memory/firmware state | Inspect jumpers, socketed components, and system configuration parameters against the existing board prior to swap. |
Dimensions, Mounting & Connection Notes
- Card & Rack Handling: Handle the printed circuit board by its edges or front/locking brackets, avoiding direct contact with component pins, traces, or edge connectors.
- ESD Protection: Use grounded wrist straps and ESD-safe mats/packaging whenever unpacking, inspecting, or installing the circuit board.
- Mechanical Seating: Confirm that card guides, backplane connectors, and retaining latches/fasteners engage smoothly without forcing misaligned pins.
FAQ
What is the ASML 386P 4022 226 2390?It is a 386P central processor module board (4022 226 2390 / 4022-226-2390) used as a processing circuit card in compatible industrial/control equipment.
Why do listings show both 386P and 4022 226 2390?4022 226 2390 (or 4022-226-2390 / 40222262390) is the 12NC part number, while 386P identifies the processor module designation.
What should be checked before installing a replacement 4022 226 2390 board? Verify exact part and revision markings against the host equipment BOM, check board/jumper/configuration settings against the original unit, and follow ESD and power-isolation procedures.
Verification & Troubleshooting Notes
- System Boot or Processor Faults: Verify rack/chassis power rails and inspect the board for proper seating in its backplane/card slot, clean edge/pin contacts, and any visible physical or component damage.
- Configuration Mismatch After Swap: Confirm that board-level switch/jumper positions and system configuration parameters match the target machine setup.
- Safety Precaution: Disconnect and lock out equipment power according to site safety procedures before removing or installing circuit boards.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626