Sale!

Bosch Rexroth TDM 1.3-050-300-W1-000 Servo Drive Module for MAC Motors

The Bosch Rexroth Indramat TDM 1.3-050-300-W1-000 is a modular AC servo drive module from the TDM series, designed to operate the MAC range of permanently excited three-phase synchronous servo motors. It regulates motor speed, torque, and position in motion-control applications such as NC machine tools, transfer lines, and production machinery.

Categories: , , , , SKU: TDM 1.3-050-300-W1-000 Brand:

Description

Core Product Summary

The Bosch Rexroth Indramat TDM 1.3-050-300-W1-000 is a modular AC servo drive module from the TDM series, designed to operate the MAC range of permanently excited three-phase synchronous servo motors. It regulates motor speed, torque, and position in motion-control applications such as NC machine tools, transfer lines, and production machinery.

The module operates from a 300 V DC link supply and delivers a type current of 50 A, with a continuous current rating of 45 A and peak current of 50 A. It uses forced ventilation through a built-in fan, which is powered at 115/220 V AC with an approximate consumption of 30 VA. The drive is configured through the MOD programming module and supports application functions characteristic of MAC servo drives, including torque-controlled master/slave operation of two motors and reversal of rotation direction with the same set-point polarity. It pairs with MAC 71 through MAC 160 servo motors, which can be optioned with an electrically released brake and an axial ventilation fan.

 

Key Technical Specifications

Parameter Value
Product type Modular AC servo drive module (TDM series)
Manufacturer Bosch Rexroth (Indramat)
Type current 50 A
Continuous current 45 A
Peak current 50 A
Link circuit (DC bus) voltage 300 V DC
Rated power 15 kW
Power loss at continuous current 250 W
Cooling Forced ventilation, built-in fan (115/220 V AC, 30 VA)
Compatible motors MAC 71 to MAC 160 synchronous servo motors
Protection class IP 10 per DIN 40 050
Insulation category Class C per DIN VDE 0110
Humidity classification Class F per DIN 40 040
Ambient operating temperature ‘+5 °C to +45 °C (up to +55 °C with reduced rated data)
Storage and transport temperature −30 °C to +85 °C
Permissible mounting altitude Up to 1000 m
Configuration MOD programming module

 

Detailed Product Overview

Within an Indramat MAC servo drive system, the power section consists of three coordinated components: the power supply module, the servo drive module, and the MAC servo motor. The TDM 1.3-050-300-W1-000 occupies the drive position in that chain. It draws energy from the 300 V DC link, established by the supply module, and synthesizes a three-phase output whose amplitude and frequency are continuously modulated to command the speed and torque of the connected MAC motor.

The 50 A type rating positions this module in the mid-power band of the TDM 1.3 series. Its 45 A continuous current and 50 A peak current capability determine the sustained and short-term torque available at the motor shaft; the sizing of the motor, the load inertia of the driven machine, and the duty cycle of the application must be evaluated together before selecting this current class. The same series includes 30 A and 100 A frames, so an existing cabinet layout built around those variants can usually accommodate this module only after checking the supply module’s capacity and the DC bus distribution.

Configuration is handled through the MOD programming module rather than through a PC-based commissioning tool: drive parameters are set and stored on the plug-in MOD module, which also allows a configured parameter set to be transferred between drives during a replacement. On the drive itself, status LEDs distinguish normal current operation from short-circuit and overcurrent conditions, supporting fault diagnosis without additional instruments.

Application-specific functions documented for MAC servo drives include torque-controlled operation of two solidly coupled motors in a master/slave arrangement and reversal of the rotation direction without changing the set-point polarity. These functions matter in machine designs where two axes must behave mechanically as one, or where the drive must be adapted to the mounting orientation of the motor without re-engineering the motion program.

The module is intended for installation in a control cabinet, where the IP 10 enclosure rating implies protection against contact but not against ingress of dust or water — it relies on the cabinet environment for that. Thermal planning should account for the 250 W power loss at continuous current, the forced-ventilation airflow of the built-in fan, and the 45 °C full-performance ambient limit, with derated operation permitted up to 55 °C.

TDM 1.3-050-300-W1-000

TDM 1.3-050-300-W1-000

TDM 1.3-050-300-W1-000

TDM 1.3-050-300-W1-000

Dimensions, Mounting & Connection Notes

  • The module is designed for mounting inside a control cabinet; the housing provides IP 10 protection per DIN 40 050, so the cabinet must supply the surrounding environmental protection.
  • Cooling is by forced ventilation using the built-in fan, powered at 115/220 V AC with approximately 30 VA consumption; cabinet airflow planning must account for the 250 W power loss at continuous current.
  • On TDM 1.3 series drives, the DC link is connected via the L+ and L− busbars, bus voltage connections are made at connector X1, and the MOD programming module plugs into connector X2.
  • Front-panel LEDs indicate operating state, including a dedicated indicator that signals short-circuit and overcurrent events.
  • Permissible ambient temperature is +5 °C to +45 °C at full rated data and up to +55 °C with reduced rated data; storage and transport are permitted between −30 °C and +85 °C.
  • The insulation category is Class C per DIN VDE 0110 and the humidity classification is F per DIN 40 040; permissible mounting altitude is 1000 m above sea level.
  • Installation, commissioning, and maintenance are activities for trained personnel, and the DC link must be discharged before work on the power connections.

 

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Motor family MAC 71 to MAC 160 synchronous servo motors Permanently excited, three-phase stator
Motor options Electrically released brake; axial ventilation fan Ordered with the motor, not the drive
DC link 300 V DC supplied by the system power supply module Drive does not generate the DC link itself
System components Power supply module + servo drive module + servo motor Three-part MAC servo drive architecture
Configuration MOD programming module Parameters set on the plug-in module; transferable between drives
Application functions Master/slave torque control of two motors; direction reversal with same set-point polarity; adjustable drift offset Configured via the drive’s parameter set
Installation Control cabinet, IP 10 housing Full performance to 45 °C ambient, derated to 55 °C; up to 1000 m altitude

 

FAQ

What is the Bosch Rexroth TDM 1.3-050-300-W1-000?
It is a modular AC servo drive module from the Indramat TDM series that operates MAC synchronous servo motors in speed, torque, and position control applications.

What current and voltage does it handle?
The type current is 50 A, with 45 A continuous and 50 A peak ratings, operating from a 300 V DC link circuit.

Which motors does it drive?
It is designed for MAC 71 to MAC 160 permanently excited three-phase synchronous servo motors, which can be equipped with an electrically released brake and an axial fan as motor options.

How is the drive configured?
Through the MOD programming module plugged into the drive; the parameter set is stored on the module and can be moved to another drive during replacement.

What cooling and environmental limits apply?
It uses forced ventilation with a built-in fan supplied at 115/220 V AC. Full rated performance is available between +5 °C and +45 °C ambient, with reduced operation up to +55 °C, at altitudes up to 1000 m.

What protective ratings does it have?
The housing is rated IP 10 per DIN 40 050, with insulation category Class C per DIN VDE 0110 and humidity class F per DIN 40 040.

Does it need its own power supply?
It operates from the 300 V DC link generated by the system’s power supply module; the MAC drive architecture consists of power supply module, servo drive module, and servo motor.

What application functions does it support?
Documented MAC drive functions include master/slave torque-controlled operation of two motors, reversal of rotation direction with unchanged set-point polarity, and adjustable drift offset.