Sale!

Bosch Rexroth VT-MACAS-500-10/V0/I Analog Valve Position Controller

Parameter Specification
Manufacturer Bosch Rexroth
Model / Type Code VT-MACAS-500-10/V0/I
Material / Part Number 0811405140
Device Type Analog valve position controller card / regulator board
Operating Voltage 24 V DC
Current Rating ~200 mA
Command Input Signal 0 to 10 V DC analog
Control Function Closed-loop valve position regulation
Categories: , , , , SKU: VT-MACAS-500-10/V0/I Brand:

Description

Core Product Summary (Brand / Model / Key Attributes)

The Bosch Rexroth VT-MACAS-500-10/V0/I (Material Number: 0811405140) is an analog valve position controller board designed for electro-hydraulic closed-loop control systems. Functioning as a analog regulator card within the Rexroth control electronics portfolio, this unit provides precise position regulation for hydraulic proportional and servo valves by processing command variables and position feedback signals.

Operating on a nominal 24 V DC power supply (draw up to approximately 200 mA), the VT-MACAS-500-10/V0/I accepts standard 0 to 10 V DC analog command signals to govern valve spool displacement. The card features integrated overcurrent protection and signal conditioning electronics to maintain accurate spool placement and stable closed-loop dynamics. Designed for mounting via screw-terminal connections or Eurocard format holders, it integrates directly into control cabinets and industrial hydraulic power units.

 

Key Technical Specifications

Parameter Specification
Manufacturer Bosch Rexroth
Model / Type Code VT-MACAS-500-10/V0/I
Material / Part Number 0811405140
Device Type Analog valve position controller card / regulator board
Operating Voltage 24 V DC
Current Rating ~200 mA
Command Input Signal 0 to 10 V DC analog
Control Function Closed-loop valve position regulation
Circuit Protection Integrated overcurrent protection
Connection Type Multi-terminal connection / terminal strip integration
Operating Temperature Range 0 °C to +70 °C (32 °F to 158 °F)

 

Detailed Product Overview

The Bosch Rexroth VT-MACAS-500-10/V0/I serves as an analog control electronic module engineered for dynamic, closed-loop position control of hydraulic proportional valves. In modern fluid power applications, maintaining precise valve spool position is vital to controlling hydraulic actuator speed, directional changes, and force output. The VT-MACAS-500-10/V0/I compares an incoming analog setpoint signal with the actual position feedback signal from an LVDT or position transducer mounted on the hydraulic valve, constantly minimizing error to maintain commanded spool position.

Constructed as a industrial-grade circuit card assembly, the controller incorporates onboard analog operational amplifiers, signal conditioning circuits, and overcurrent protection to defend against power supply fluctuations and output line faults. By offloading position control loop calculations from the primary programmable logic controller (PLC), the module delivers fast analog response times without adding processing overhead or scan-time delays to the main machine automation program.

This controller board is widely integrated into industrial hydraulic systems, including metal forming presses, plastics injection molding machines, die-casting equipment, and heavy material handling systems where precise hydraulic valve positioning is required.

VT-MACAS-500-10/V0/I

VT-MACAS-500-10/V0/I

VT-MACAS-500-10/V0/I

VT-MACAS-500-10/V0/I

Engineering Selection Highlights

  • Closed-Loop Position Control: Compares 0–10 V DC analog command values against transducer feedback signals for dynamic spool positioning.
  • Overcurrent Protection: Integrated circuit protection guards internal components against overcurrent conditions and output overload.
  • Standard Industrial Power Supply: Operates on nominal 24 V DC control voltage for straightforward cabinet integration alongside standard PLCs.
  • Reduced PLC Processing Load: Handles fast analog closed-loop calculations locally on the card rather than consuming PLC cycle time.

 

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Operating Power 24 V DC nominal supply voltage Ensure low-ripple power source capable of delivering at least 200 mA continuous current.
Control Input Signal 0 to 10 V DC analog voltage command Compatible with standard PLC analog output modules or external command potentiometers.
Valves & Transducers Hydraulic proportional/servo valves with position feedback sensors Designed for closed-loop hydraulic valve position control loops.
Terminal Wiring Industrial terminal strip / connector block interface Verify correct terminal pinouts for power, command, and feedback signal lines prior to powering on.

 

Dimensions, Mounting & Connection Notes

  • Mounting Method: Designed for Eurocard holder or sub-rack installation inside industrial control enclosures.
  • Wiring & Terminals: Features a multi-pin terminal connection interface for power, analog command input, transducer feedback, and driver output lines.
  • Environmental Limits: Operating temperature range rated from 0 °C to +70 °C (32 °F to 158 °F). Ensure adequate enclosure ventilation to avoid thermal buildup inside control cabinets.
  • Shielding & Grounding: Analog command and feedback wiring must use shielded twisted-pair cables to prevent electro-magnetic interference (EMI) from inducing signal noise into the control loop.

 

FAQ

What is the Bosch Rexroth VT-MACAS-500-10/V0/I?

The Bosch Rexroth VT-MACAS-500-10/V0/I is an analog electronic valve position controller board (Material Number: 0811405140) used to regulate the spool position of proportional hydraulic valves in closed-loop systems.

What operating voltage does the VT-MACAS-500-10/V0/I require?

The card operates on a standard 24 V DC power supply with a current consumption of approximately 200 mA.

What signal type does the command input accept?

The module accepts a standard 0 to 10 V DC analog voltage input signal to set the reference position for the valve.

Does the VT-MACAS-500-10/V0/I feature onboard circuit protection?

Yes, the control card includes built-in overcurrent protection to safeguard internal electronics against electrical faults.

How is the controller board integrated into a hydraulic control cabinet?

It is designed for mounting via compatible card holders or sub-rack frames, connecting via terminal wiring to the 24 V DC power supply, PLC analog output, valve solenoids, and position feedback sensors.

 

Verification & Troubleshooting Notes

  • Check Power Supply Status: Verify that stable 24 V DC power is delivered to the supply terminals and that voltage drop remains within acceptable operating limits.
  • Verify Analog Input Signals: Measure the command voltage across input terminals using a calibrated multimeter to confirm that a valid 0–10 V DC signal is reaching the board from the controller.
  • Feedback Loop Inspection: Inspect position transducer connections (LVDT or displacement sensor) for continuous continuity, grounded shielding, and proper feedback voltage levels.
  • Inspect Wiring Integrity: Ensure all terminal screws are tightened and that cable shielding is properly grounded at one end to minimize noise contamination on analog lines.