Description
Core Product Summary
The Bosch Rexroth VT-TSPD-1-1X/V0/0 (material number R900208591) is a digital amplifier card designed for the control of proportional valves in electrohydraulic systems. It functions as an analogue command value module and extension board within the Rexroth valve amplifier family.
This Europe-format PCB module supports command value processing and output stage functions for proportional valves without electrical position feedback. It is intended for rack or stand-off mounting in industrial control cabinets and integrates with compatible Rexroth proportional valve types through its digital and analogue interfaces.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Product type | Digital amplifier / analogue command value module |
| Model / Order number | VT-TSPD-1-1X/V0/0, R900208591 |
| Form factor | Europe-format PCB card with front plate, stand-off mount |
| Primary function | Command value processing and control of proportional valves without electrical position feedback |
| System family | Bosch Rexroth VT series valve amplifiers |
Engineering Selection Highlights
- Exact model VT-TSPD-1-1X/V0/0 with material number R900208591 confirms identity for replacement or system matching in Rexroth electrohydraulic controls.
- Designed as a digital amplifier card for proportional valves without electrical position feedback, matching systems that use open-loop or non-feedback valve control.
- Europe-format PCB construction with stand-off mounting supports installation in standard 19-inch card holders or control cabinets used with Rexroth valve electronics.
- Serves as an analogue command value module / extension board, enabling integration of command signals into the valve amplifier architecture.
- Compatible with the broader Rexroth proportional valve control family, allowing selection based on existing valve types and rack infrastructure.

Bosch Rexroth VT-TSPD-1-1XV00

Bosch Rexroth VT-TSPD-1-1XV00
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| System / family | Bosch Rexroth VT series valve amplifiers | Part of the digital amplifier range for proportional valves |
| Mounting | Europe-format card, stand-off mount | Fits standard card holders or cabinet installations used with Rexroth electronics |
| Valve type | Proportional valves without electrical position feedback | Matches open-loop proportional control applications |
| Interface role | Analogue command value module / extension board | Processes command signals for valve output stages |
Dimensions, Mounting & Connection Notes
The module is constructed as a Europe-format printed circuit board with front plate and stand-off mounting. It is intended for installation in compatible card holders or control cabinets typical of Rexroth valve amplifier systems. Connection is via the multi-point connector arrangement standard to this form factor.
Detailed Product Overview
The Bosch Rexroth VT-TSPD-1-1X/V0/0, identified by material number R900208591, is a digital amplifier card belonging to the manufacturer’s VT series of valve electronics. It is configured as an analogue command value module and extension board specifically for the control of proportional valves that operate without electrical position feedback.
In the control architecture, the module receives command signals, processes them through its digital circuitry, and delivers the appropriate drive signals to the valve solenoids. This enables proportional control of flow or pressure in hydraulic systems where closed-loop position feedback is not employed. The Europe-format PCB design with front plate and stand-off mounting allows straightforward integration into standard industrial card racks or control cabinets commonly used with Rexroth electrohydraulic components.
Selection of this exact model is driven by the need to match existing system wiring, card holder geometry, and valve types already installed. Engineers verify the material number R900208591 and the VT-TSPD-1-1X designation to ensure pin compatibility and functional equivalence within the original control scheme. The module’s role as a command value processor means it handles signal scaling, enable functions, and output stage current delivery required by the connected proportional valves.
Because the design is optimised for non-feedback proportional valves, it is suited to applications where the valve response characteristics and system dynamics can be managed through ramp settings and command value adjustment rather than continuous position closed-loop control. Installation considerations centre on correct seating in the card holder, proper connection of the multi-point interface, and confirmation that the surrounding power supply and signal wiring match the module’s requirements.
Overall, the VT-TSPD-1-1X/V0/0 provides a defined interface point between higher-level control logic and the hydraulic actuators, supporting reliable proportional operation in industrial electrohydraulic systems built around Bosch Rexroth valve technology.
Applications & System Role
The VT-TSPD-1-1X/V0/0 operates as a digital amplifier and command value module within electrohydraulic control architectures. It processes analogue and digital command signals to drive proportional valves that do not incorporate electrical position feedback.
In the system, it sits between the higher-level controller or command source and the valve solenoids, providing the necessary signal conditioning, ramp generation capability, and output stage support for smooth valve actuation. Typical fit scenarios include industrial hydraulic systems where precise open-loop proportional control of directional or pressure valves is required, such as in machinery using Rexroth proportional valve technology.
FAQ
What is the Bosch Rexroth VT-TSPD-1-1X/V0/0?
It is a digital amplifier card and analogue command value module, material number R900208591, used for controlling proportional valves in electrohydraulic systems.
Which system does the VT-TSPD-1-1X/V0/0 belong to?
It belongs to the Bosch Rexroth VT series of valve amplifiers designed for proportional valves without electrical position feedback.
What is the primary function of this module?
It processes command values and provides the drive signals required to operate proportional valves in open-loop configurations.
How is the VT-TSPD-1-1X/V0/0 mounted?
It is a Europe-format PCB card with front plate intended for stand-off mounting in compatible card holders or control cabinets.
What type of valves is this amplifier intended for?
It is intended for proportional valves that do not use electrical position feedback.
What is the material number for exact identification?
The material number is R900208591, corresponding to the VT-TSPD-1-1X/V0/0 designation.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626