Description
Core Product Summary
The Bosch Rexroth VT3024 is an analog amplifier card designed for the open-loop control of proportional hydraulic valves that do not have electrical position feedback. It is primarily used with pilot-operated proportional directional valves (such as type 4WRZ) and direct-operated proportional pressure valves (such as DBEP6 and 3DREP6).
The amplifier converts a command voltage signal into a controlled pulsed current for the valve solenoids. It includes a differential input, ramp generator, step function generator, and two independent pulsed current output stages.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Product type | Analog electrical amplifier card |
| Series | VT 3000 (Series 3X) |
| Suitable valves | Pilot-operated proportional directional valves (e.g. 4WRZ); direct-operated proportional pressure valves (e.g. DBEP6, 3DREP6) |
| Position feedback | None (open-loop) |
| Operating voltage | 24 V DC (functional range approx. 22–39 V) |
| Max. solenoid current | 800 mA |
| Bias (minimum) current | 20 mA ±25 % |
| Output stage type | Pulsed (PWM) |
| Pulse frequency | Approx. 170 Hz ±10 % |
| Command input | Differential input (typically 0 to ±10 V) |
| Ramp time | Adjustable (typical factory setting 5 s; can be set to 1 s range) |
| Form factor | Eurocard (100 × 160 mm) |
| Connection | 32-pin terminal strip (DIN 41612) |
Detailed Product Overview
The Bosch Rexroth VT3024 amplifier is intended for applications in which proportional valves are controlled without internal position sensing. It generates the necessary solenoid current from a low-level command signal supplied by a PLC, controller, or potentiometer.
Key functional blocks include:
- Differential command value input for noise-resistant signal transmission
- Step function generator for improved response around zero
- Adjustable ramp generator for controlled acceleration and deceleration of the output current
- Two independent pulsed current output stages (one for each solenoid on dual-solenoid valves)
- Polarity protection on the supply voltage
The pulsed output (with dither effect) helps reduce hysteresis in the valve. Test points on the card allow monitoring of the command value and the actual solenoid currents. The amplifier is supplied as a plug-in Eurocard that installs in a suitable card holder (for example VT 3002 series) together with an appropriate power supply.
Factory default ramp time is normally 5 seconds; a shorter range (approximately 1 second) can be selected by jumper or adjustment. The card is widely used in industrial hydraulic systems requiring proportional flow or pressure control without closed-loop position feedback.

VT3024

VT3024
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Valve types | 4WRZ (pilot-operated directional), DBEP6 / 3DREP6 (pressure) and similar valves without position feedback | Confirm exact valve series and solenoid characteristics |
| Card holder | VT 3002 series or equivalent | Required for mounting and field connections |
| Power supply | 24 V DC (external or via dedicated power module) | Observe voltage limits and polarity protection |
| Command signal | Differential voltage input (typically 0 to ±10 V) | Match controller output range |
| Output | Two pulsed current stages, max. 800 mA each | Suitable for the solenoids of the target valves |
| Form factor | Eurocard 100 × 160 mm | Standard industrial rack or holder mounting |
Dimensions, Mounting & Connection Notes
- Card format: Eurocard 100 × 160 mm (DIN 41494)
- Front panel: Standard 3 HE height
- Connection: 32-pin DIN 41612 connector
- Mounting: Installed in a compatible card holder (e.g., VT 3002)
- Test points: Available for command value and solenoid currents
- Indicators: Status LEDs on many variants
FAQ
What is the Bosch Rexroth VT3024?
It is an analog amplifier card for controlling proportional hydraulic valves that do not have electrical position feedback.
Which valves can it control?
Primarily pilot-operated proportional directional valves (type 4WRZ) and direct-operated proportional pressure valves (types DBEP6 and 3DREP6).
Does it support closed-loop position control?
No. It is designed for open-loop operation without electrical position feedback from the valve.
What is the maximum solenoid current?
800 mA per output stage.
What power supply is required?
24 V DC (typical industrial supply within the specified operating range).
Is a card holder required?
Yes. The VT3024 is a plug-in Eurocard and is normally used with a matching card holder such as the VT 3002 series.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626