Description
Core Product Summary
The B&R X20AIB744 is an analog input module designed for the X20 System, providing four full-bridge strain gauge inputs. It is engineered to interface directly with 4-wire strain gauge load cells, delivering high-precision measurement capabilities for industrial weighing, tension control, and force monitoring applications.
This module features a 24-bit digital converter resolution and a data output rate of 5000 samples per second per channel. Each of the four channels supports an independently configurable strain gauge factor (2 to 256 mV/V) and input filter settings. It includes a short-circuit and overload-proof 5.5 VDC supply per channel, comprehensive LED and software diagnostics, and holds CE, UKCA, ATEX Zone 2, and cULus approvals. The module requires a compatible X20 bus module and a 16-pin X20TB1F terminal block for operation.
Key Technical Specifications
| Parameter | Verified Specification |
|---|---|
| Module Type | X20 analog input module |
| Input Type | 4 full-bridge strain gauge inputs (differential, 4-wire) |
| Digital Converter Resolution | 24-bit (Sigma-delta) |
| Data Output Rate | 5000 samples per second per channel |
| Conversion Time | 200 µs |
| Strain Gauge Factor | 2 to 256 mV/V (software configurable per channel) |
| Input Filter | 2.5 kHz cutoff, 3rd order, 60 dB slope (configurable per channel) |
| Strain Gauge Supply | 5.5 VDC, max 65 mA per channel (short-circuit/overload protected) |
| Operating Sensor Range | 85 to 5000 Ω |
| Electrical Isolation | Bus isolated from analog input and strain gauge supply voltage |
| Power Consumption | 0.01 W (Bus), 1 W (Internal I/O) |
| Certifications | CE, UKCA, ATEX Zone 2 (II 3G Ex nA nC IIA T5 Gc), cULus (E115267) |
Engineering Selection Highlights
- High-Resolution Measurement: The 24-bit converter and 5 kHz output rate per channel provide the precision and speed required for dynamic industrial scale and force measurement applications.
- Independent Channel Configuration: Each of the four channels allows individual software configuration of the strain gauge factor and input filter, accommodating mixed sensor sensitivities on a single module.
- Integrated Sensor Supply: The built-in 5.5 VDC, 65 mA per-channel excitation supply is short-circuit and overload-proof, eliminating the need for external powering hardware.
- Measurement Compensation: The module design compensates for absolute uncertainties in the measurement circuit, such as component tolerances and zero offset, ensuring accuracy is primarily affected only by operating temperature changes.
- Hazardous Area Readiness: ATEX Zone 2 certification allows deployment in specific hazardous environments where explosive gas atmospheres are not likely to occur in normal operation.
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| System Family | B&R X20 System | Must be mounted on an X20 bus segment. |
| Mandatory Bus Module | X20BM11 or X20BM15 | Required to provide bus communication and internal I/O power. |
| Mandatory Terminal Block | X20TB1F | 16-pin, 24 VDC keyed terminal block required for field wiring. |
| Engineering Software | B&R Automation Studio | Requires the appropriate hardware support package (HW Upgrade) for configuration. |
| Sensor Type | 4-wire full-bridge strain gauge load cells | Operating resistance range is 85 to 5000 Ω. |
Dimensions, Mounting & Connection Notes
- Module Pitch: 12.5 mm (+0.2 mm tolerance).
- Mounting Orientation: Supported in both horizontal and vertical orientations.
- Operating Temperature: -25 to 60°C (horizontal mounting); -25 to 50°C (vertical mounting).
- Installation Elevation: No limitation up to 2000 m. Above 2000 m, ambient temperature must be reduced by 0.5°C per 100 m.
- Degree of Protection: IP20.
- Connection Method: Pluggable 16-pin terminal block (X20TB1F, ordered separately).
- Wiring Best Practice: Use twisted and shielded conductors with cable length kept as short as possible. Route separately from load circuits and avoid intermediate terminals between the module and the sensor.
Detailed Product Overview
The B&R X20AIB744 is a specialized analog input module engineered for the X20 System, providing four channels of full-bridge strain gauge measurement. In industrial automation architectures, acquiring precise force or weight data typically requires dedicated external weighing transmitters. This module integrates that functionality directly into the distributed I/O rack, streamlining the control cabinet layout and reducing component count.
The core of the module’s performance lies in its 24-bit sigma-delta analog-to-digital converter, which delivers a fast conversion time of 200 µs and a data output rate of 5000 samples per second per channel. This high resolution and speed are essential for dynamic applications where load conditions change rapidly, such as checkweighing or tension control systems. To ensure signal integrity, each channel features an independently configurable 3rd-order input filter with a 2.5 kHz cutoff frequency and a 60 dB slope, allowing engineers to suppress specific mechanical or electrical noise frequencies on a per-channel basis.
Flexibility in sensor integration is a key design feature. The strain gauge factor can be configured via software anywhere from 2 to 256 mV/V for each individual channel. This allows a single X20AIB744 module to interface with different load cell sensitivities simultaneously. The module also provides a dedicated 5.5 VDC excitation supply for each channel, rated for a maximum of 65 mA. This supply is inherently short-circuit and overload-proof, protecting both the module and the connected sensors from wiring faults.
Measurement accuracy is maintained through an internal compensation concept. The system is designed to eliminate absolute uncertainties within the measurement circuit, including component tolerances, effective bridge voltage variations, and zero offset. As a result, measurement precision remains stable and is primarily influenced only by changes in operating temperature, with maximum gain drift limited to 35 ppm/°C and offset drift to 15 ppm/°C.
For system integration, the module requires a compatible X20 bus module to establish communication and internal I/O power, along with the X20TB1F 16-pin terminal block for field wiring. Electrical isolation is maintained between the system bus and the analog input/strain gauge supply, preventing ground loops from affecting the broader control network. Comprehensive diagnostics, including module run/error, open circuit detection, and input status, are reported via local LED indicators and mapped to the controller’s software registers, enabling rapid troubleshooting and predictive maintenance strategies.

X20AIB744

X20AIB744
Applications & System Role
The B&R X20AIB744 serves as a dedicated high-precision analog input slice within the X20 distributed I/O architecture. Its primary role is to acquire and digitize millivolt-level signals from 4-wire full-bridge strain gauge load cells. This makes it specifically suited for industrial weighing systems, force monitoring, tension control, and material testing applications where high-resolution data acquisition is critical. By integrating directly into the X20 backplane, it eliminates the need for standalone weighing controllers, allowing strain measurement data to be processed directly by the central controller via the X20 bus.
FAQ
Q: What is the B&R X20AIB744?
A: The B&R X20AIB744 is an analog input module for the X20 System, featuring four full-bridge strain gauge inputs designed for high-precision load cell measurement.
Q: What type of sensors does the X20AIB744 support?
A: It supports 4-wire full-bridge strain gauge load cells with an operating resistance range of 85 to 5000 Ω.
Q: What is the resolution and data output rate of this module?
A: The module provides a 24-bit digital converter resolution with a data output rate of 5000 samples per second per channel.
Q: Can different strain gauge sensitivities be used on the same module?
A: Yes, the strain gauge factor (2 to 256 mV/V) and the input filter settings can be configured independently for each of the four channels via software.
Q: Does the module provide power to the load cells?
A: Yes, it includes a short-circuit and overload-proof 5.5 VDC supply capable of delivering up to 65 mA per channel.
Q: What mandatory accessories are required to install the X20AIB744?
A: Installation requires one X20 bus module (e.g., X20BM11 or X20BM15) and one 16-pin X20TB1F terminal block, both of which are ordered separately.
Q: Is the X20AIB744 certified for use in hazardous areas?
A: Yes, it holds ATEX certification for Zone 2 environments (II 3G Ex nA nC IIA T5 Gc), along with CE, UKCA, and cULus approvals.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626