Sale!

B&R X20DC1198 X20 I/O Module for 5 V SSI Absolute Encoders

The B&R X20DC1198 is an X20 System digital counter I/O module for connecting one SSI absolute encoder with a 5 V encoder signal. It converts the encoder’s serial position data into a 32-bit counter value and supports both Gray and Binary coding at transfer rates from 125 kbit/s to 1 Mbit/s.

Categories: , , , , SKU: X20DC1198 Brand:

Description

Core Product Summary

The B&R X20DC1198 is an X20 System digital counter I/O module for connecting one SSI absolute encoder with a 5 V encoder signal. It converts the encoder’s serial position data into a 32-bit counter value and supports both Gray and Binary coding at transfer rates from 125 kbit/s to 1 Mbit/s.

The module includes two additional 24 VDC digital inputs with EN 61131-2 Type 1 characteristics and provides internal 5 VDC or 24 VDC encoder power supply, each limited to 300 mA. It mounts on an X20 bus module and requires a separately ordered 12-pin X20TB12 terminal block. The IP20 module is fanless, supports horizontal or vertical mounting, and is certified CE, UKCA, ATEX Zone 2, cULus, and cCSAus HazLoc.

 

Key Technical Specifications

Category Specification
Product type X20 digital counter I/O module
Encoder interface 1 × SSI absolute encoder, 5 V symmetrical signal
Counter size 32-bit
Encoder coding Gray or Binary
SSI transfer rates 125 kbit/s, 250 kbit/s, 500 kbit/s, 1 Mbit/s
Maximum SSI transfer rate 1 Mbit/s
Additional digital inputs 2
Digital input nominal voltage 24 VDC, −15% / +20%
Digital input characteristics EN 61131-2 Type 1, sink input, 3-wire connection
Digital input current at 24 VDC Approximately 3.3 mA
Digital input resistance 7.19 kΩ
Hardware input filter ≤ 2 µs
Switching thresholds Low < 5 VDC; high > 15 VDC
Encoder power supply, 5 V 5 VDC ±5%, module-internal, maximum 300 mA
Encoder power supply, 24 V 24 VDC, module-internal, maximum 300 mA
Power consumption 0.01 W bus; 1.5 W internal I/O
Electrical isolation Bus isolated from encoder and channel; channel not isolated from channel and encoder
Status indication I/O function per channel, operating state, and module status
Diagnostics Module run/error via LED status indicator and software
Signal wiring Shielded lines required for all signal lines
Module pitch 12.5 + 0.2 mm
Degree of protection IP20
Operating temperature, horizontal −25 to 60°C
Operating temperature, vertical −25 to 50°C
Storage / transport temperature −40 to 85°C
Relative humidity, operation 5 to 95%, non-condensing
Approvals CE, UKCA, ATEX Zone 2, cULus, cCSAus HazLoc, DNV, CCS, LR, KR, EAC, KC

 

Engineering Selection Highlights

  • The X20DC1198 accepts one SSI absolute encoder with a 5 V symmetrical signal, so it is intended for 5 V SSI encoders rather than encoders requiring a different signal level.
  • Its 32-bit counter and Gray or Binary coding allow configuration to match the encoder’s output format.
  • SSI transfer rates of 125 kbit/s through 1 Mbit/s must be matched to the connected encoder’s supported rate.
  • The module supplies encoder power internally at either 5 VDC ±5% or 24 VDC, with a 300 mA limit for either supply option.
  • Two additional 24 VDC sink-type digital inputs provide supplementary sensing points alongside the encoder input.
  • The module requires an X20 bus module and an X20TB12 terminal block, both ordered separately.
  • All signal lines must be shielded, which is an important installation requirement for encoder signal integrity.
X20DC1198

X20DC1198

X20DC1198

X20DC1198

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Automation system B&R X20 System The module is an X20 I/O module for use in an X20 I/O station.
Bus module X20BM11 required; X20BM15 or coated X20cBM11 are documented compatible alternatives The bus module supplies the mounting and bus connection; order separately.
Terminal block X20TB12, 12-pin, 24 VDC keyed One terminal block is required and ordered separately.
Encoder type SSI absolute encoder with 5 V symmetrical signal The encoder must use a 5 V SSI signal interface.
Encoder coding Gray or Binary Configure the module to match the encoder’s data coding.
SSI transfer rate 125 kbit/s, 250 kbit/s, 500 kbit/s, or 1 Mbit/s Select a rate supported by both the module and encoder.
Digital inputs 2 × 24 VDC sink inputs, EN 61131-2 Type 1 Use 3-wire connections within the stated voltage and current limits.
Signal wiring Shielded lines required Apply shielded cable for encoder and signal connections.
Mounting Horizontal or vertical Ambient temperature limits differ by orientation.

 

Dimensions, Mounting & Connection Notes

Item Verified data
Module pitch 12.5 + 0.2 mm
Mounting orientation Horizontal or vertical
Operating temperature, horizontal −25 to 60°C
Operating temperature, vertical −25 to 50°C
Installation altitude No limitation from 0 to 2,000 m; above 2,000 m, reduce ambient temperature by 0.5°C per 100 m
Degree of protection IP20
Required terminal block 1 × X20TB12, 12-pin, 24 VDC keyed
Required bus module 1 × X20BM11; X20BM15 or X20cBM11 are documented compatible alternatives
Signal wiring Shielded cables required for all signal lines
Electrical isolation Bus is isolated from encoder and channel; channel is not isolated from channel and encoder

 

Detailed Product Overview

The B&R X20DC1198 is a dedicated counter-function module for the X20 System. It provides one input for an SSI absolute encoder using a 5 V symmetrical signal and converts the encoder’s serial data into a 32-bit counter value. The module supports both Gray and Binary coding, allowing it to be configured according to the connected encoder’s data format.

SSI communication can be configured at 125 kbit/s, 250 kbit/s, 500 kbit/s, or 1 Mbit/s. The selected rate must be compatible with the encoder, since the module’s maximum transfer rate is 1 Mbit/s. The module also provides internal encoder supply options: 5 VDC ±5% or 24 VDC, each limited to 300 mA. The encoder power supply is short-circuit proof and overload-proof.

In addition to the SSI encoder channel, the X20DC1198 has two 24 VDC digital inputs. These are EN 61131-2 Type 1 sink inputs with 3-wire connections, approximately 3.3 mA input current at 24 VDC, and a hardware input filter of 2 µs or less. Their switching thresholds are below 5 VDC for a low state and above 15 VDC for a high state.

The module is electrically isolated between the bus and the encoder/channel circuits. The encoder and channel circuits are not isolated from each other. B&R specifies shielded signal lines for all signal connections, which is a material installation requirement for encoder wiring.

The X20DC1198 is an IP20 module with a 12.5 + 0.2 mm pitch. It requires an X20 bus module and an X20TB12 terminal block, both ordered separately. The module can be mounted horizontally or vertically; the permitted operating temperature is −25 to 60°C horizontally and −25 to 50°C vertically. At elevations above 2,000 m, the allowable ambient temperature is reduced by 0.5°C for every additional 100 m.

The module carries CE and UKCA approvals and is documented for ATEX Zone 2, cULus industrial control equipment, and cCSAus hazardous-location process control equipment. Additional marine and regional approvals include DNV, CCS, LR, KR, EAC, and KC. Approval applicability should be reviewed against the final X20 installation and applicable system documentation.

 

Applications & System Role

The X20DC1198 occupies an encoder-input position in a B&R X20 I/O station. Its primary role is to acquire absolute position data from a 5 V SSI encoder and make the resulting 32-bit value available to the X20 controller through the system bus.

The two additional 24 VDC digital inputs can be used for related discrete signals in the same local I/O group. Because the module provides internal encoder power at 5 VDC or 24 VDC, it can support the encoder supply requirement within its 300 mA limit, subject to the connected encoder’s electrical demand.

Typical fit scenarios are machine axes, rotary tables, positioning mechanisms, or other equipment using an SSI absolute encoder for absolute position feedback. The module’s suitability depends on the encoder using a 5 V SSI interface and a supported Gray or Binary coding format.

 

FAQ

What is the B&R X20DC1198?
The B&R X20DC1198 is an X20 System digital counter module that connects one SSI absolute encoder with a 5 V signal and provides a 32-bit position or count value to the controller.

Which encoder type does the X20DC1198 support?
It supports one SSI absolute encoder with a 5 V symmetrical signal interface.

What counter size and coding formats are supported?
The module provides a 32-bit counter and supports Gray or Binary encoder coding.

What SSI transfer rates does the X20DC1198 use?
It supports 125 kbit/s, 250 kbit/s, 500 kbit/s, and 1 Mbit/s.

Does the module supply power to the encoder?
Yes. It provides internal 5 VDC ±5% or 24 VDC encoder power supply, with a maximum output of 300 mA for either option.

How many digital inputs does the X20DC1198 have?
It has two additional 24 VDC digital inputs with EN 61131-2 Type 1, sink-type characteristics.

Which accessories are required for installation?
The module requires one X20 bus module, such as the X20BM11, and one 12-pin X20TB12 terminal block; both are ordered separately.

What environmental limits apply?
The module is IP20 rated and operates from −25 to 60°C horizontally or −25 to 50°C vertically. Storage and transport temperatures are −40 to 85°C.