Description
Core Product Summary
The B&R X20DI8371 is an X20 system digital input module with eight 24 VDC inputs designed for 1-wire sink connections. It features Type 1 input characteristics per EN 61131-2, a hardware input filter of ≤100 μs, and a software input filter configurable from 0 to 25 ms in 0.2 ms increments (default 1 ms) for the entire module.
The module connects to the X20 bus via a separate bus module and requires a 12-pin terminal block for field wiring. Power consumption is 0.18 W on the bus and 1.2 W for internal I/O. Status indicators show I/O function per channel, operating state, and module status. It operates in the X20 modular I/O architecture with electrical isolation between channels and the bus.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Product type | X20 digital input module |
| Number of inputs | 8 |
| Nominal voltage | 24 VDC |
| Input voltage range | 24 VDC −15 % / +20 % |
| Input current at 24 VDC | Typ. 3.75 mA |
| Input characteristics | Type 1 per EN 61131-2 |
| Input circuit | Sink |
| Connection type | 1-wire |
| Input resistance | Typ. 6.4 kΩ |
| Switching threshold Low | <5 VDC |
| Switching threshold High | >15 VDC |
| Hardware input filter | ≤100 μs |
| Software input filter | Default 1 ms, configurable 0–25 ms in 0.2 ms steps |
| Insulation voltage (channel to bus) | 500 Veff |
| Electrical isolation | Channel isolated from bus; channels not isolated from each other |
| Power consumption (bus) | 0.18 W |
| Power consumption (internal I/O) | 1.2 W |
| Status indicators | I/O function per channel, operating state, module status |
| Degree of protection | IP20 |
| Operating temperature (horizontal) | −25 to +60 °C |
| Operating temperature (vertical) | −25 to +50 °C |
| Storage/transport temperature | −40 to +85 °C |
| Relative humidity (operation) | 5 to 95 %, non-condensing |
| Pitch | 12.5 +0.2 mm |
| B&R ID code | 0xA4AB |
Detailed Product Overview
The X20DI8371 provides eight digital inputs for the B&R X20 modular I/O system. Each input is designed for 24 VDC sink wiring using 1-wire connections. The module follows Type 1 input characteristics according to EN 61131-2, with defined switching thresholds below 5 VDC for low and above 15 VDC for high.
A fixed hardware filter of ≤100 μs is combined with a software filter that applies to the entire module. The software filter defaults to 1 ms and can be adjusted between 0 and 25 ms in 0.2 ms steps, allowing adaptation to different signal noise conditions or response requirements. Typical input current is 3.75 mA at 24 VDC with an input resistance of approximately 6.4 kΩ.
Channels are electrically isolated from the X20 bus (500 Veff) but not from each other. Status LEDs indicate the function of each input channel as well as overall module operating state and status. Diagnostics for module run/error are available via LED and software.
The electronic module must be mounted on a compatible X20 bus module (X20BM11 or X20BM15) and uses a separately ordered 12-pin X20TB12 terminal block for field connections. Bus power consumption is low at 0.18 W, with 1.2 W drawn for internal I/O. The module supports both horizontal and vertical mounting orientations within the documented temperature ranges and carries IP20 protection for cabinet installation.

X20DI8371
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| System family | B&R X20 system | Requires X20 bus module for backplane connection |
| Bus module | X20BM11 or X20BM15 | Ordered separately; provides 24 VDC keyed internal I/O supply |
| Terminal block | X20TB12 (12-pin, 24 VDC keyed) | Ordered separately |
| Input wiring | 1-wire sink connection | Designed for sink input circuit |
| Isolation | Channel-to-bus isolation | Channels share common reference |
| Engineering software | Automation Studio | Hardware upgrades available for multiple versions |
Dimensions, Mounting & Connection Notes
- Pitch: 12.5 +0.2 mm
- Mounting: X20 bus module on DIN rail; horizontal or vertical orientation supported
- Required accessories (ordered separately):
– Bus module: X20BM11 or X20BM15
– Terminal block: X20TB12 - Degree of protection: IP20
- Installation elevation: no limitation up to 2000 m; derate ambient temperature by 0.5 °C per 100 m above 2000 m
- Connection: 1-wire sink inputs via 12-pin terminal block
FAQ
What is the B&R X20DI8371?
It is an X20 digital input module with eight 24 VDC inputs designed for 1-wire sink connections and a configurable software input filter.
How many inputs does the module have and what is the voltage rating?
It has eight digital inputs rated for 24 VDC with a voltage range of −15 % / +20 %.
What type of input circuit is used?
The module uses a sink input circuit with 1-wire connections and Type 1 characteristics per EN 61131-2.
Can the input filter be adjusted?
Yes. The software input filter is configurable for the entire module from 0 to 25 ms in 0.2 ms increments (default 1 ms). Hardware filter is ≤100 μs.
What accessories are required?
A bus module (X20BM11 or X20BM15) and a 12-pin terminal block (X20TB12) must be ordered separately.
What are the operating temperature limits?
Horizontal mounting: −25 to +60 °C. Vertical mounting: −25 to +50 °C.
Is there electrical isolation?
Channels are isolated from the bus (500 Veff). Channels are not isolated from each other.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626